Default credentials
- Username
- admin
- Password / access
- admin
Access: Web
ACE MiFi, FLYT CPE
Source (opens in a new tab)ROUTER & MODEM REFERENCE
Spectranet router & modem login
Login addresses, default credentials, and setup instructions for Spectranet equipment.
Open router login http://192.168.8.1 (opens in a new tab)Open router login http://spectranet.mobilewifi (opens in a new tab)
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| SpectranetACE MiFiRouter · Web | http://spectranet.mobilewifi (opens in a new tab)http://192.168.8.1 (opens in a new tab) | admin | admin | First whole-brand coverage of Spectranet Nigeria, a pocket MiFi mobile hotspot (distinct form factor from this run's fixed FLYT CPE). Spectranet's own device guide states: "Connect your computer to your Spectranet device, then open a browser and visit http://spectranet.mobilewifi/ or http://192.168.8.1... Login with username admin and password admin." Recovery & reset instructionsConnect your computer/phone to the Spectranet ACE MiFi's Wi-Fi, open a browser and go to http://spectranet.mobilewifi/ or http://192.168.8.1, then sign in with username admin and password admin. Factory reset (if locked out): press and hold the recessed reset pinhole on the device for about 10 seconds until the lights blink/restart, then log in again with the same admin/admin default. |
| SpectranetFLYT CPEModem / gateway · Web | http://192.168.8.1 (opens in a new tab) | admin | admin | A fixed home-broadband CPE sibling to this run's pocket ACE MiFi, same ISP-wide admin/admin default. Spectranet's official device guide states for FLYT: "open a browser and visit http://192.168.8.1... Login with username admin and password admin... Click WLAN SETTING. Find SSID (network name) and PASSWORD." Spectranet's guide documents several further CPE/MiFi model names (EVO, FREEDOM, Racer, BLAZE, Flame, Whizz, ZOOM) sharing this identical credential/IP — held back this run as near-duplicate padding of the same two already-captured categories. Recovery & reset instructionsConnect to the Spectranet FLYT CPE, browse to http://192.168.8.1, sign in with username admin and password admin, then click WLAN SETTING to find/change the SSID and PASSWORD. Factory reset: hold the reset pinhole ~10 seconds until it restarts, then log back in with admin/admin. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.