ROUTER & MODEM REFERENCE
Find the models that use this address and the login method that applies to your device.
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| NetgearOrbi Pro WiFi 6 AX6000 Tri-Band (SXK80)Mesh system · Web | http://orbilogin.com (opens in a new tab)http://192.168.1.1 (opens in a new tab) | admin | password | Business-tier tri-band Wi-Fi 6 mesh system (router + satellite, NETGEAR Insight cloud management) — distinct consumer-vs-business credential model from the already-seeded consumer Orbi lineup. NETGEAR's official Orbi Pro login page states "The user name is admin and the default password is password" and "The default Gateway IP address of your Orbi is 192.168.1.1" — the same page lists SXK80 among covered Orbi Pro models. Recovery & reset instructionsPress and hold the Reset button on the Orbi Pro router until the LED blinks amber, then release to restore factory defaults and log back in at orbilogin.com with the default credentials. |
| NetgearOrbi RBE971 Router / RBE970 Satellite (Orbi 970 Series)Mesh system · Web | http://orbilogin.com (opens in a new tab)http://192.168.1.1 (opens in a new tab) | admin | Password created during setup | Whole Home Quad-Band Mesh Wi-Fi 7 system (router + satellite), a newer tier above the already-seeded Orbi RBK-series. Official NETGEAR user manual: "Enter the Orbi admin user name and password. The user name is admin. The password is the one that you specified when you set up your Orbi." The WiFi network password (distinct from the admin login) is separately preset and unique on the router label per the same manual. Recovery & reset instructionsPress and hold the Reset button until the Power LED blinks — this restores factory default settings (a shorter hold under 5 seconds just reboots). |
| NetgearOrbi RBK50 (AC3000)Mesh system · Web | http://orbilogin.com (opens in a new tab)http://192.168.1.1 (opens in a new tab) | admin | password | Netgear documents the Orbi default admin login as admin / password. If you set the system up through the Orbi app you may have been prompted to create your own password instead — in that case reset to factory to restore admin/password. Recovery & reset instructionsLog in to the router (RBR50) at http://orbilogin.com or 192.168.1.1 with user name admin and password password (case-sensitive). To factory reset, power the Orbi router on and hold the Reset button on the bottom for about 7-10 seconds until the ring LED blinks amber, then re-sync the satellite and log in with admin/password. |
| NetgearOrbi RBK752 (AX4200)Mesh system · Web | http://orbilogin.com (opens in a new tab)http://192.168.1.1 (opens in a new tab) | admin | Password created during setup | Set up through the Orbi app, this system forces you to create your own admin password. Netgear's legacy Orbi default (admin / password) may still apply if configured via the web interface, but app setup overrides it. Recovery & reset instructionsThis WiFi 6 Orbi is normally set up via the Orbi app, which makes you create an admin password, so there's no reliable default. To reset the router (RBR750), power it on and hold the Reset button on the bottom for about 7-10 seconds until the ring LED blinks amber, then re-run setup in the Orbi app or at http://orbilogin.com to set a new admin password. |
| NetgearOrbi RBK762S (RBR760, AX5400)Mesh system · Web | http://orbilogin.com (opens in a new tab)http://192.168.1.1 (opens in a new tab) | admin | Password created during setup | Tri-band Wi-Fi 6 Orbi mesh system (RBR760 router + RBS760 satellite), AX5400 class. Username is admin with no static default password — it is the one you set the first time you log in at orbilogin.com. NETGEAR: "The user name is admin. The password is the one that you specified the first time that you logged in." Recovery & reset instructionsHold the Reset button on the bottom of the RBR760 router until the LED flashes to restore factory defaults; you then set a new admin password during setup. |
| NetgearOrbi RBK763 (AX5400)Mesh system · Web | http://orbilogin.com (opens in a new tab)http://192.168.1.1 (opens in a new tab) | admin | Password created during setup | Orbi app setup forces you to set your own admin password, so there's no admin/password out of the box. The legacy Orbi default (admin / password) only applies to web-interface configuration. Recovery & reset instructionsThis WiFi 6 Orbi kit is configured through the Orbi app, which makes you create an admin password during setup. To reset the router (RBR760), power it on and hold the Reset button on the bottom for about 7-10 seconds until the ring LED blinks amber, then re-run setup in the Orbi app or at http://orbilogin.com to choose a new admin password. |
| NetgearOrbi RBK852 (AX6000)Mesh system · Web | http://orbilogin.com (opens in a new tab)http://192.168.1.1 (opens in a new tab) | admin | Password created during setup | App-based setup forces you to create your own admin password on this model — admin/password is not guaranteed to work. Netgear's Orbi KB still lists admin / password as the documented default for web-interface setups. Recovery & reset instructionsThe Orbi AX6000 is set up through the Orbi app, which requires you to create an admin password, so there is no working default login. To reset the router (RBR850), power it on and hold the Reset button on the bottom for about 7-10 seconds until the ring LED blinks amber, then re-run setup via the Orbi app or http://orbilogin.com and set a new password. |
| NetgearOrbi RBK853Mesh system · Web | http://orbilogin.com (opens in a new tab)http://192.168.1.1 (opens in a new tab) | admin | Password created during setup | Tri-band Wi-Fi 6 (AX6000-class) mesh system — RBR850 router + 2x RBS850 satellites with a dedicated backhaul band — a 3-piece pack distinct from the 2-piece RBK852 bundle already covered. NETGEAR's Orbi setup KB: create your own administrator password; the default admin login is 'admin' with no factory password. Recovery & reset instructionsPress and hold the Reset button on the back of the Orbi router for about 7 seconds until the LED blinks, then re-pair satellites using the Orbi app or orbilogin.com. |
No records match these filters. Try another model or clear the filters.
GET CONNECTED
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.