Check the device label
- Username
- No username required
- Password / access
- Password on the device label
Access: Web
Power Router / Giga Router Wi-Fi 6
Source (opens in a new tab)ROUTER & MODEM REFERENCE
NOS router & modem login
Login addresses, default credentials, and setup instructions for NOS equipment.
A shared web login address is not listed for this equipment. Check the model instructions below for app access, the device label, or your router’s gateway address.
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| NOSPower Router / Giga Router Wi-Fi 6Modem / gateway · Web | – | No username required | Password on the device label | Portugal's second ISP row, distinct from MEO — cable/fiber home gateway bundled with NOS TV/phone service. NOS's own official help page states: "Na etiqueta na parte de baixo do router encontra o nome da nova rede Wi-Fi e password." ("On the label on the bottom of the router you'll find the name of the new Wi-Fi network and password.") — a per-device label credential; current-generation admin/password changes are performed via the myNOS app rather than a stated local admin-panel login. Recovery & reset instructionsUse the recessed reset hole above the USB port and press for ~10 seconds to restore factory defaults. |
No records match these filters. Try another model or clear the filters.
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.