Skip to content
Manuals+

ROUTER & MODEM REFERENCE

Movistar router & modem login

Login addresses, default credentials, and setup instructions for Movistar equipment.

Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.

QUICK START

Most likely login options

See every listed combination ↓

Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.

1

Check the device label

Username
admin
Password / access
Password on the device label

Access: Web

Colombia standard-issue router (multi-vendor)

Source (opens in a new tab)

Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.

MODEL DETAILS

Login addresses & credentials

1 records

Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.

Models, login addresses, credentials, instructions and sources
Model / deviceLogin addressUsernamePassword / accessNotes & source
MovistarColombia standard-issue router (multi-vendor)Modem / gateway · Webhttp://192.168.1.1 (opens in a new tab)adminPassword on the device label

Movistar (Telefónica) Colombia's official ISP-wide router guidance rather than a single SKU. Movistar official blog: "La mayoría de los routers de Movistar tienen una dirección predeterminada como 192.168.1.1 o 192.168.0.1... la mayoría de las veces, el usuario es admin y la contraseña se encuentra en la etiqueta del equipo."

Recovery & reset instructions

Check the device label for the printed password; Movistar issues multiple router models across its fiber/DSL base with IP defaulting to 192.168.1.1 or 192.168.0.1 depending on the unit.

Related login addresses

GET CONNECTED

How to reach your router

  1. Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
  2. Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
  3. Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.

Admin password or Wi-Fi password?

The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.

If the password does not work

Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.

Find your model’s manual →

Sources & data

Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.

Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.