Default credentials
- Username
- admin
- Password / access
- admin
Access: Web
B310 4G LTE CPE Cat4 (Entel Chile), B612 4G LTE CPE Cat6 (Entel Chile), GATEWAY Rev. and other listed models
Source (opens in a new tab)ROUTER & MODEM REFERENCE
Huawei router & modem login
Login addresses, default credentials, and setup instructions for Huawei equipment.
Open router login http://192.168.3.1 (opens in a new tab)Open router login http://192.168.8.1 (opens in a new tab)Open router login http://192.168.100.1 (opens in a new tab)
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| Huawei–Router · Not specified | – | admin | admin | Model not specified by this list. |
| Huawei–Router · Not specified | – | TMAR#HWMT8007079 | Leave blank | Model not specified by this list. |
| HuaweiAX2 (Claro Argentina)Router · Web | http://192.168.3.1 (opens in a new tab) | No username required | Password created during setup | Huawei AX2 Wi-Fi 6 router, distributed by Claro Argentina — first Argentina row in the dataset. Claro's official support documents it in a Wi-Fi-repeater/extender configuration role with an open unsecured setup SSID and no preset admin password: "Conectate a la red WiFi abierta llamada 'Huawei' desde los ajustes de tu teléfono." / "Abrí el navegador e ingresá el número 192.168.3.1 para visualizar la página de Huawei." / "Creá una contraseña para tu router Huawei (te servirá para futuras configuraciones)." Recovery & reset instructionsConnect to the open out-of-box Wi-Fi network named 'Huawei', browse to 192.168.3.1, select your home Wi-Fi network and enter its password, then create a new admin password for the Huawei router itself — there is no factory-default admin password to recover. |
| HuaweiB310 4G LTE CPE Cat4 (Entel Chile)Modem / gateway · Web | http://192.168.8.1 (opens in a new tab) | admin | admin | Entel Chile's earlier, entry-tier 4G home-internet CPE: LTE Cat4 (up to 150 Mbps down), single Fast Ethernet LAN port, single-band Wi-Fi — an older/slower chassis than the Cat6 B612 sibling row, sharing the same admin/admin default per Entel's own guide. Recovery & reset instructionsChange the default admin/admin credentials immediately after first login; use the physical reset button to restore factory defaults if changed and forgotten. |
| HuaweiB612 4G LTE CPE Cat6 (Entel Chile)Modem / gateway · Web | http://192.168.8.1 (opens in a new tab) | admin | admin | Entel Chile's newer 4G home-internet CPE tier: LTE Cat6 (up to 300 Mbps down), Gigabit Ethernet LAN port, dual-band Wi-Fi — a faster/newer chassis than the Cat4 B310 sibling row. This is the admin/config login; the WiFi network password is separate, printed on the router's own sticker (SSID pattern 'ENTELXXXXXX'). Recovery & reset instructionsChange the default admin/admin credentials immediately after first login; use the physical reset button to restore factory defaults if changed and forgotten. |
| HuaweiGATEWAY Rev.Router · Not specified | – | admin | admin | Defaults may depend on the listed model, revision, firmware or ISP. |
| HuaweiHG8245H (Ooredoo Oman Fibre Gateway)Modem / gateway · Web | http://192.168.100.1 (opens in a new tab) | No username required | Password on the device label | Oman — Ooredoo's own home-internet troubleshooting and support page, naming the Huawei HG8245H fibre modem specifically (distinct from the same page's separate, unnamed "5G router" section which was left out of this dataset for lacking a model name). Ooredoo's official page states: for the Huawei Modem (HG8245H), type "192.168.100.1" in the browser, and gives the username/password as found "on the label located at the back of the modem." Recovery & reset instructionsBrowse to http://192.168.100.1 and log in with the username and password printed on the label on the back of the modem; a rear reset pinhole restores factory defaults if changed. |
| HuaweiHG8405 Rev.Router · Not specified | – | user | user | Defaults may depend on the listed model, revision, firmware or ISP. |
| HuaweiMT880RRouter · MULTI | – | TMAR#HWMT8007079 | Leave blank | Defaults may depend on the listed model, revision, firmware or ISP. |
| HuaweiMT882 ADSL2+Router · Not specified | – | admin | admin | Defaults may depend on the listed model, revision, firmware or ISP. |
| HuaweiWiFi AX3 (WS7100/WS7200)Router · Web | http://192.168.3.1 (opens in a new tab) | No username required | Password created during setup | No universal default — the management password is set on first setup (or printed on the nameplate for WPS-initiated setup). Recovery & reset instructionsWith a pin, hold the recessed RESET button until the indicator light goes out/blinks, then wait for the router to restart to factory defaults. |
| HuaweiWiFi WS5200Router · Web | http://192.168.3.1 (opens in a new tab) | No username required | Password created during setup | No universal default — set on first setup; default gateway 192.168.3.1. Recovery & reset instructionsWith a pin, hold the recessed RESET button until the indicator light goes out/blinks, then wait for the router to restart to factory defaults. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.