Use your setup password
- Username
- No username required
- Password / access
- Password created during setup
Access: Web
Magic R1 300M
Source (opens in a new tab)ROUTER & MODEM REFERENCE
H3C router & modem login
Login addresses, default credentials, and setup instructions for H3C equipment.
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| H3CMagic R1 300MRouter · Web | http://192.168.100.1 (opens in a new tab) | No username required | Password created during setup | H3C's consumer Magic-series entry router (300Mbps class, single-band) — a genuine h3c.com consumer manual, resolving prior runs' finding that only enterprise AP/MSR KB articles existed. H3C official user manual: after connecting, the web page loads with no pre-set admin credential; the setup wizard then prompts the user to define a new login password. Recovery & reset instructionsPress and hold the Reset pinhole with a pointed object for more than 5 seconds until the status LED flashes rapidly, then release and wait for the device to restart. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.