Check the device label
- Username
- admin
- Password / access
- Password on the device label
Access: Web
GWN7052, GWN7062, GWN7605 and other listed models
Source (opens in a new tab)ROUTER & MODEM REFERENCE
Grandstream router & modem login
Login addresses, default credentials, and setup instructions for Grandstream equipment.
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| Grandstream–Router · Not specified | – | admin | 1234 | Model not specified by this list. |
| Grandstream–Router · Not specified | – | Administrator | admin | Model not specified by this list. |
| Grandstream–Router · Not specified | – | admin | admin | Model not specified by this list. |
| Grandstream–Router · Not specified | – | End User | 123 | Model not specified by this list. |
| Grandstream–Router · Not specified | – | No username required | admin | Model not specified by this list. |
| Grandstream–Router · Not specified | – | End User | 123 (or blank) | Model not specified by this list. |
| GrandstreamGWN7052Router · Web | http://192.168.80.1 (opens in a new tab) | admin | Password on the device label | Dual-band 802.11ac (Wi-Fi 5) gigabit VPN router (GWN7052; GWN7052F is the SFP/fibre variant) — 1x gigabit WAN plus gigabit LAN, standalone or GWN.Cloud managed. The default admin password is UNIQUE per unit and printed on the MAC tag — not a static admin/admin — and a password change is forced at first boot. Recovery & reset instructionsBrowse to https://192.168.80.1 and log in with admin plus the default password printed on the MAC/label sticker on the unit; at first boot or after a factory reset you are required to set new admin and user passwords before the web UI loads. |
| GrandstreamGWN7062Router · Web | http://192.168.80.1 (opens in a new tab) | admin | Password on the device label | Dual-band Wi-Fi 6 VPN/security router in the GWN70x2 line — a distinct, higher-throughput model from the GWN7052 already covered, sharing the same default IP scheme. Official documentation: 'the default administrator's username is "admin" and the default password is printed on the MAC tag of the unit' — forced change on first boot or after a factory reset. Recovery & reset instructionsPress and hold the reset button for about 10 seconds until the unit reboots to factory defaults, then browse to https://192.168.80.1 and log in with 'admin' plus the unique password printed on the MAC tag of the unit. |
| GrandstreamGWN7605Access point · Web | – | admin | Password on the device label | 802.11ac Wave-2 2x2:2 dual-band Wi-Fi 5 AP, 1.27Gbps aggregate throughput, dual Gigabit PoE/PoE+ ports — a genuinely lower tier than the already-seeded GWN7625/GWN7630 (3x3:3-4x4:4 MU-MIMO, 1.75Gbps aggregate). Official quick installation guide: "The default administrator username is 'admin' and the default random password can be found at the sticker on the GWN7605" and "GWN7605's default SSID and password information are printed on the MAC tag of the unit." No fixed default IP — access is via https://gwn_<MAC>.local or Grandstream's GWN Discovery Tool. Recovery & reset instructionsPress and hold the RESET pinhole button for 7 seconds to restore factory default settings; the admin password is a unique random password printed on the unit's sticker/MAC tag, not a shared default. |
| GrandstreamGWN7625Access point · Web | – | admin | Password on the device label | High-performance 802.11ac Wave-2 AP with mixed-radio 2.4G 2x2:2 / 5G 4x4:4 MU-MIMO — a mid tier distinct from GWN7630's dual-band 4x4:4 config and from the seeded gwn7052/gwn7062/gwn7660/gwn7660e/gwn7664. Official QIG: "The default administrator username is 'admin' and the default random password can be found at the sticker on the GWN7625." Recovery & reset instructionsPress the factory reset button for 7 seconds to reset the unit to factory default settings. |
| GrandstreamGWN7630Access point · Web | – | admin | Password on the device label | High-performance 802.11ac Wave-2 enterprise AP, dual-band 4x4:4 MU-MIMO — 4x4 high-density tier, distinct from the seeded lower-tier gwn7052/gwn7062 and the Wi-Fi 6 gwn7660/gwn7660e/gwn7664 siblings. Official QIG: "The default administrator username is 'admin' and the default random password can be found at the sticker on the GWN7630." Recovery & reset instructionsPress the factory reset button for 7 seconds to reset the unit to factory default settings. |
| GrandstreamGWN7660Access point · Web | – | admin | Password on the device label | 802.11ax 2x2 Wi-Fi 6 ceiling/wall access point in the GWN76xx line, DHCP/discovery-based rather than a fixed static IP — distinct form factor from the GWN70x2 routers. Official Quick Installation Guide: 'The default administrator username is "admin" and the default random password can be found at the sticker on the GWN7660.' Recovery & reset instructionsPress and hold the reset button until the unit reboots to factory defaults. Discover it via the GWN Discovery Tool or https://gwn_<MAC-address>.local/, then log in with 'admin' plus the random password printed on the unit's sticker. |
| GrandstreamGWN7660EAccess point · Web | – | admin | Password on the device label | 802.11ax Wi-Fi 6 indoor access point with EXTERNAL antennas (2x2:2 on 2.4 GHz, 3x3:2 on 5 GHz) and a single Gigabit PoE/PoE+ uplink — the external-antenna form factor distinguishes it from the integrated-antenna GWN7660/GWN7664. Discovery-based, no fixed IP. Official Quick Installation Guide: "The default administrator username is \"admin\" and the default random password can be found on the sticker on the GWN7660E." Recovery & reset instructionsPress and hold the RESET button for 7 seconds to restore factory default settings, then discover the AP via the GWN Discovery Tool or https://gwn_<MAC>.local/ and log in with admin plus the sticker password. |
| GrandstreamGWN7660LRAccess point · Web | – | admin | Password on the device label | Outdoor long-range Wi-Fi 6 access point (dual-band 2x2:2 MU-MIMO, up to 250m coverage, weatherproof casing, PoE) — the outdoor tier of the GWN76xx family, distinct from the indoor GWN7660/GWN7660E already seeded. Official QIG: "The default administrator username is 'admin' and the default random password can be found on the back sticker on the GWN7660LR." Recovery & reset instructionsPress and hold the reset button until the unit reboots to factory defaults. Discover it via the GWN Discovery Tool or https://gwn_<MAC-address>.local/, then log in with 'admin' plus the random password printed on the back sticker. |
| GrandstreamGWN7664Access point · Web | – | admin | Password on the device label | Enterprise 802.11ax Wi-Fi 6 AP — dual-band 4x4:4 MU-MIMO, DL/UL OFDMA, up to 512 clients, 2.5G + 1G PoE/PoE+. In standalone mode, reach it at https://gwn_<mac>.local; the username is admin with a UNIQUE random default password on the device sticker (not a shared static default). Grandstream: "The default administrator username is 'admin' and the default random password can be found on the sticker on the GWN7664." Device hostname format: gwn_<mac>.local. Recovery & reset instructionsHold the physical Reset button ~7 seconds until the LEDs flash to restore factory defaults; the per-device random default password on the sticker then applies again. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.