ROUTER & MODEM REFERENCE

GL.iNet router & modem login

Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.

QUICK START

Most likely login options

See every listed combination ↓

Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.

Use your setup password

Username: No username required
Password / access: Password created during setup

Access: Web

Beryl AX (GL-MT3000), Flint (GL-AX1800), Flint 2 (GL-MT6000) and other listed models

Source (opens in a new tab)

Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.

MODEL DETAILS

Login addresses & credentials

4 records

Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.

Models, login addresses, credentials, instructions and sources
Model / device	Login address	Username	Password / access	Notes & source
GL.iNetBeryl AX (GL-MT3000)Router · Web	http://192.168.8.1 (opens in a new tab)	No username required	Password created during setup	Beryl AX (GL-MT3000) is GL.iNet's pocket travel router. No admin password is shipped with it — the first page at 192.168.8.1 asks you to create one. The wireless name and key on its label are unique to that unit, not a universal pair. Manufacturer (opens in a new tab) Recovery & reset instructions Reset: with the router powered on, press and hold the RESET button for about 10 seconds until the LEDs flash, then release and wait for reboot. Rejoin the label's wireless network, open 192.168.8.1, pick a language, and create your admin password.
GL.iNetFlint (GL-AX1800)Router · Web	http://192.168.8.1 (opens in a new tab)	No username required	Password created during setup	Flint (GL-AX1800) is the desktop model in the range. It arrives without an admin password; your first visit to 192.168.8.1 requires you to make one, at least 5 characters. Its bottom label prints a per-device wireless name and key, which is a separate thing entirely. Manufacturer (opens in a new tab) Recovery & reset instructions Reset: with power on, keep RESET depressed near 10 seconds until the LEDs flash, then let go and allow the reboot. Reconnect over the wireless network from the bottom label, go to 192.168.8.1, choose a language, and enter an admin password of your own.
GL.iNetFlint 2 (GL-MT6000)Router · Web	http://192.168.8.1 (opens in a new tab)	No username required	Password created during setup	The Flint 2 is GL.iNet's AX6000 WiFi 6 router with 2.5 Gbps WAN/LAN ports. Official docs state the admin panel has no default password — you create your own (minimum 5 characters) at first login on 192.168.8.1. Login is password-only with no username, separate from the Wi-Fi key. Manufacturer (opens in a new tab) Recovery & reset instructions Hold the physical RESET button about 10 seconds until the LED flashes to restore factory defaults, then browse to 192.168.8.1 and set a new admin password.
GL.iNetSlate AX (GL-AXT1800)Router · Web	http://192.168.8.1 (opens in a new tab)	No username required	Password created during setup	Slate AX (GL-AXT1800) is the AX1800-class travel unit. Nothing is preset on it: 192.168.8.1 opens a create-password step before any settings appear. The SSID and key on the bottom sticker differ per device and are not the admin credential. Manufacturer (opens in a new tab) Recovery & reset instructions Reset: hold RESET for roughly 10 seconds while the unit is powered, release once the LEDs flash, and let it restart. Attach to the sticker's wireless network, load 192.168.8.1, select a language, and define the admin password you want.

Related login addresses

GET CONNECTED

How to reach your router

Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.

Admin password or Wi-Fi password?

The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.

If the password does not work

Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.

Find your model’s manual →

Sources & data

Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.

Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.