ROUTER & MODEM REFERENCE

Firewalla router & modem login

A shared web login address is not listed for this equipment. Check the model instructions below for app access, the device label, or your router’s gateway address.

Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.

QUICK START

Most likely login options

See every listed combination ↓

Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.

Use the vendor app

Username: Not specified
Password / access: Vendor app or account

Access: App

Blue Plus, Gold, Purple and other listed models

Source (opens in a new tab)

Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.

MODEL DETAILS

Login addresses & credentials

4 records

Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.

Models, login addresses, credentials, instructions and sources
Model / device	Login address	Username	Password / access	Notes & source
FirewallaBlue PlusModem / gateway · App	App / account access	Not specified	Vendor app or account	Compact home/small-office firewall/router gateway — the higher-throughput sibling of the base Firewalla Blue, and the first Blue-line SKU in this seed (only Gold and Purple were covered previously). Managed entirely from the Firewalla app; Firewalla's own help center: 'the Web interface is a complementary management interface to the mobile app and is supported on all Firewalla devices Blue and up' — no device login exists. Manufacturer (opens in a new tab) Recovery & reset instructions Pairing and factory reset are handled entirely through the Firewalla app; there is no on-box web-admin credential to reset.
FirewallaGoldModem / gateway · App	App / account access	Not specified	Vendor app or account	Multi-gigabit firewall/router security gateway (Gold Original/Rev B/Plus: 4x 1G routable ports; Gold SE adds 2.5G; Gold Pro adds 10G/2.5G). Managed entirely from the Firewalla iOS/Android app — there is NO web-admin username/password on the box. Setup: install the app, tap +, and pair using the bundled red security dongle. The optional web interface (my.firewalla.com) authenticates through the paired app, not device credentials. Manufacturer (opens in a new tab) Recovery & reset instructions Setup/pairing and factory reset are driven from the Firewalla app; the hardware reset varies by model (Gold Pro has a dedicated Reset button, others reset via SD-card reflash) — see Firewalla's 'How to reset Firewalla box' article.
FirewallaPurpleModem / gateway · App	App / account access	Not specified	Vendor app or account	Gigabit firewall/router security gateway with dual-band Wi-Fi. Managed entirely from the Firewalla iOS/Android app — there is NO on-box web login. Setup and pairing are done in the app; the complementary web interface (my.firewalla.com), supported on Firewalla Blue and up, authenticates via the paired mobile app rather than device credentials. Manufacturer (opens in a new tab) Recovery & reset instructions Pairing and factory reset are handled through the Firewalla app; see Firewalla's 'How to reset Firewalla box' article for the hardware reset procedure.
FirewallaPurple SEModem / gateway · App	App / account access	Not specified	Vendor app or account	Affordable hardware refresh of the already-seeded Firewalla Purple: 4-core CPU (vs 6-core), no built-in WiFi, max 500 Mbps throughput (vs 1 Gbps), OpenVPN capped at 60 Mbps / WireGuard at 220 Mbps. Firewalla: "Purple SE is an affordable version of Firewalla Purple, without short-distance Wi-Fi, for network speeds below 500 Mbps... A smartphone is required to use the unit." Manufacturer (opens in a new tab) Recovery & reset instructions No web admin UI exists — the unit is paired and administered entirely through the Firewalla mobile app. Hold the physical reset button, then re-pair via the app.

GET CONNECTED

How to reach your router

Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.

Admin password or Wi-Fi password?

The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.

If the password does not work

Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.

Find your model’s manual →

Sources & data

Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.

Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.