Default credentials
- Username
- admin
- Password / access
- admin
Access: Web
VIGOR 2900+, VIGOR Rev. ALL, Vigor2135 and other listed models
Source (opens in a new tab)ROUTER & MODEM REFERENCE
DrayTek router & modem login
Login addresses, default credentials, and setup instructions for DrayTek equipment.
Open router login http://192.168.1.1 (opens in a new tab)Open router login http://192.168.1.2 (opens in a new tab)Open router login http://vigorap.com (opens in a new tab)
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| DrayTek–Router · Not specified | – | Draytek | 1234 | Model not specified by this list. |
| DrayTek–Router · Not specified | – | draytek | 1234 | Model not specified by this list. |
| DrayTek–Router · Not specified | – | admin | admin | Model not specified by this list. |
| DrayTek–Router · Not specified | – | admin | Leave blank | Model not specified by this list. |
| DrayTek2800Router · Not specified | – | No username required | Leave blank | Defaults may depend on the listed model, revision, firmware or ISP. |
| DrayTekVIGOR 2600Router · HTTP | – | admin | Leave blank | Defaults may depend on the listed model, revision, firmware or ISP. |
| DrayTekVIGOR 2900+Router · HTTP | – | admin | admin | Defaults may depend on the listed model, revision, firmware or ISP. |
| DrayTekVIGOR 3300Router · HTTP | – | draytek | 1234 | Defaults may depend on the listed model, revision, firmware or ISP. |
| DrayTekVIGOR Rev. ALLRouter · HTTP | – | admin | admin | Defaults may depend on the listed model, revision, firmware or ISP. |
| DrayTekVigor2135Router · Web | http://192.168.1.1 (opens in a new tab) | admin | admin | Gigabit Ethernet WAN broadband router with no built-in DSL modem — sits behind a separate modem/ONT, DrayTek's entry-level multi-WAN model. Genuine static default admin/admin confirmed in the official quick-start guide. Recovery & reset instructionsPress and hold the recessed Factory Reset button on the rear panel for about 10 seconds until the ACT LED starts blinking, then release; the router reboots to factory defaults. Browse to http://192.168.1.1 and log in with admin/admin. |
| DrayTekVigor2765Router · Web | http://192.168.1.1 (opens in a new tab) | admin | admin | Wired-only VDSL2/ADSL2+ 35b-chipset security router with no built-in Wi-Fi — the base SKU in the Vigor2765 family (the RF/Vac variant adds 802.11ac and VoIP). Genuine static default admin/admin confirmed in the official quick-start guide. Recovery & reset instructionsPress and hold the recessed Factory Reset button on the rear panel for about 10 seconds until the ACT LED starts blinking, then release; the router reboots to factory defaults. Browse to http://192.168.1.1 and log in with admin/admin. |
| DrayTekVigor2765VacRouter · Web | http://192.168.1.1 (opens in a new tab) | admin | admin | RF-series variant of the already-seeded wired-only Vigor2765, adding built-in 802.11ac Wi-Fi and VoIP telephony (FXS) ports. DrayTek's dedicated RF-series Quick Start Guide explicitly lists '2.2 Vigor2765Vac' as a covered model and gives the same static default: "Open a web browser on your PC and type http://192.168.1.1... please type 'admin/admin' as the Username/Password and click Login." Recovery & reset instructionsPress and hold the Factory Reset button on the rear panel until the ACT LED blinks quickly, then browse to http://192.168.1.1 and log in with admin/admin. |
| DrayTekVigor2865Router · Web | http://192.168.1.1 (opens in a new tab) | admin | admin | VDSL2/ADSL2+ (35b) security firewall router with an integrated DSL modem and, on the RF model, 802.11ac Wi-Fi. Genuine static default admin/admin out of the box; the quick-start guide confirms you set a new password on first login, but admin/admin is the factory credential. Recovery & reset instructionsWith the router powered on (ACT LED blinking), press and hold the recessed Factory Reset hole for more than 5 seconds; when the ACT LED blinks rapidly, release to restart at defaults. Then browse to http://192.168.1.1 and log in. |
| DrayTekVigor2927Router · Web | http://192.168.1.1 (opens in a new tab) | admin | admin | Dual-WAN Gigabit business security/VPN router — Ethernet WAN only (no DSL modem); the wired SKU has no Wi-Fi (the RF variant adds Wi-Fi 5). DrayTek ships a genuine static default of admin/admin; recent firmware then prompts you to set a new password, but admin/admin is the factory credential you first enter. Recovery & reset instructionsWith the router powered on (ACT LED blinking), press and hold the recessed Factory Reset hole for more than 5 seconds; when the ACT LED blinks rapidly, release and let it restart at factory defaults. Then browse to http://192.168.1.1 and log in. |
| DrayTekVigor3910Router · Web | http://192.168.1.1 (opens in a new tab) | admin | admin | SMB multi-WAN (4x GbE WAN) security router/firewall built for VPN concentration and load-balancing at the edge — no built-in Wi-Fi or DSL modem, DrayTek's business-tier model above the Vigor2927. Genuine static default admin/admin confirmed in the official quick-start guide. Recovery & reset instructionsPress and hold the recessed Factory Reset button on the rear panel for about 10 seconds until the ACT LED starts blinking, then release; the router reboots to factory defaults. Browse to http://192.168.1.1 and log in with admin/admin (the system then prompts a password change). |
| DrayTekVigorAP 903Access point · Web | http://vigorap.com (opens in a new tab)http://192.168.1.2 (opens in a new tab) | admin | admin | 802.11ac business access point (PoE, wall/ceiling mount) — DrayTek's AP line, a distinct default-IP scheme (.1.2) from the Vigor router family (.1.1) already covered. Official Quick Start Guide: 'Please enter "admin/admin" as the Username/Password and click Login.' Recovery & reset instructionsPress and hold the Factory Reset button for about 10 seconds until the LEDs flash, then release to restore factory defaults. Browse to http://192.168.1.2 (or http://vigorap.com over Wi-Fi) and log in with admin/admin. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.