ROUTER & MODEM REFERENCE

Digicel router & modem login

Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.

QUICK START

Most likely login options

See every listed combination ↓

Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.

Default credentials

Username: Digicel
Password / access: Digicel

Access: Web

Digicel+ Home Modem

Source (opens in a new tab)

Use your setup password

Username: No username required
Password / access: Password created during setup

Access: Web

Digicel Smart WiFi (mesh booster system)

Source (opens in a new tab)

Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.

MODEL DETAILS

Login addresses & credentials

2 records

Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.

Models, login addresses, credentials, instructions and sources
Model / device	Login address	Username	Password / access	Notes & source
DigicelDigicel Smart WiFi (mesh booster system)Mesh system · Web	http://192.168.101.1 (opens in a new tab)	No username required	Password created during setup	A mesh add-on sibling to this run's Digicel+ Home Modem, on a distinct IP and with no static default — the same official guide states: "If this is your first time connecting, you will not need to enter a password; instead, you will be redirected to a portal where you will be required to set your new WiFi name and password." Manufacturer (opens in a new tab) Recovery & reset instructions Reset the Smart WiFi booster; devices must be re-paired to the modem if the WiFi name/password is later changed.
DigicelDigicel+ Home ModemModem / gateway · Web	http://192.168.100.1 (opens in a new tab)	Digicel	Digicel	First whole-brand coverage of Digicel's Caribbean footprint — the WiFi SSID/password sticker is a separate credential from this admin login. Digicel's official Digicel+ Home getting-started guide states: "Log on address: 192.168.100.1 Log on username: Digicel Log on password: Digicel." Manufacturer (opens in a new tab) Recovery & reset instructions Use the reset pinhole on the modem, or contact Digicel Customer Care to have a technician reset it.

Related login addresses

GET CONNECTED

How to reach your router

Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.

Admin password or Wi-Fi password?

The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.

If the password does not work

Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.

Find your model’s manual →

Sources & data

Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.

Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.