Skip to content
Manuals+

ROUTER & MODEM REFERENCE

Cisco router & modem login

Login addresses, default credentials, and setup instructions for Cisco equipment.

Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.

QUICK START

Most likely login options

See every listed combination ↓

Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.

3

Default credentials

Username
Administrator
Password / access
admin

Access: Not specified

Model not specified; check the table for applicability.

Source (opens in a new tab)

Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.

MODEL DETAILS

Login addresses & credentials

65 records

Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.

Models, login addresses, credentials, instructions and sources
Model / deviceLogin addressUsernamePassword / accessNotes & source
Cisco–Router · Not specified–No username requiredpublic/private/secret

Model not specified by this list.

Cisco–Router · Not specified–Not specifiedcc

Model not specified by this list.

Cisco–Router · Not specified–Administratoradmin

Model not specified by this list.

Cisco–Router · Not specified–No username requiredCisco router

Model not specified by this list.

Cisco–Router · Not specified–Not specifiedcisco

Model not specified by this list.

Cisco–Router · Not specified–End User7936

Model not specified by this list.

Cisco–Router · Not specified–uwmadminpassword

Model not specified by this list.

Cisco–Router · Not specified–pnadminpnadmin

Model not specified by this list.

Cisco–Router · Not specified–admindiamond

Model not specified by this list.

Cisco–Router · Not specified–UAMIS_Leave blank

Model not specified by this list.

Cisco–Router · Not specified–No username requiredriverhead

Model not specified by this list.

Cisco–Router · Not specified–No username required_Cisco

Model not specified by this list.

Cisco–Router · Not specified–EAdminLeave blank

Model not specified by this list.

Cisco–Router · Not specified–ciscoLeave blank

Model not specified by this list.

Cisco–Router · Not specified–bubba(unknown)

Model not specified by this list.

Cisco–Router · Not specified–admincisco

Model not specified by this list.

Cisco–Router · Not specified–cmakercmaker

Model not specified by this list.

Cisco–Router · Not specified–public ReadOnly accesssecret

Model not specified by this list.

Cisco–Router · Not specified–No username requiredchangeit

Model not specified by this list.

Cisco–Router · Not specified–Not specifiedcable-docsis

Model not specified by this list.

Cisco–Router · Not specified–CiscoCisco

Model not specified by this list.

Cisco–Router · Not specified–wlsewlsedb

Model not specified by this list.

Cisco–Router · Not specified–ciscocisco

Model not specified by this list.

Cisco–Router · Not specified–admintsunami

Model not specified by this list.

Cisco–Router · Not specified–ESubscriberLeave blank

Model not specified by this list.

Cisco–Router · Not specified–bbsd-clientNULL

Model not specified by this list.

Cisco–Router · Not specified–No username requiredcc

Model not specified by this list.

Cisco–Router · Not specified–private ReadWrite accesssecret

Model not specified by this list.

Cisco–Router · Not specified–adminLeave blank

Model not specified by this list.

Cisco–Router · Not specified–No username requiredletmein

Model not specified by this list.

Cisco–Router · Not specified–No username requiredc

Model not specified by this list.

Cisco–Router · Not specified–rootblender

Model not specified by this list.

Cisco–Router · Not specified–UNITY_Leave blank

Model not specified by this list.

Cisco–Router · Not specified–saLeave blank

Model not specified by this list.

Cisco–Router · Not specified–admindefault

Model not specified by this list.

Cisco–Router · Not specified–Administratorchangeme

Model not specified by this list.

Cisco–Router · Not specified–No username requiredLeave blank

Model not specified by this list.

Cisco–Router · Not specified–technician2 + last 4 of Audio

Model not specified by this list.

Cisco–Router · Not specified–guestLeave blank

Model not specified by this list.

Cisco–Router · Not specified–rootpassword

Model not specified by this list. Added by DPL admin. From

Cisco–Router · Not specified–praisenetworkperfectpraise

Model not specified by this list.

Cisco–Router · Not specified–enablecisco

Model not specified by this list.

Cisco–Router · Not specified–hsahsadb

Model not specified by this list.

Cisco–Router · Not specified–enableLeave blank

Model not specified by this list.

Cisco–Router · Not specified–UOMNI_Leave blank

Model not specified by this list.

Cisco–Router · Not specified–Not specifiedc

Model not specified by this list.

Cisco–Router · Not specified–CISCO15otbu+1

Model not specified by this list.

Cisco–Router · Not specified–rootCisco

Model not specified by this list.

Cisco–Router · Not specified–ripeopLeave blank

Model not specified by this list.

Cisco–Router · Not specified–adminchangeme

Model not specified by this list.

Cisco–Router · Not specified–netrangrattack

Model not specified by this list.

Cisco–Router · Not specified–wlseuserwlsepassword

Model not specified by this list.

Cisco–Router · Not specified–rootattack

Model not specified by this list.

Cisco–Router · Not specified–Not specifiedILMI

Model not specified by this list.

Cisco–Router · Not specified–adminadmin

Model not specified by this list.

Cisco–Router · Not specified–UVPIM_Leave blank

Model not specified by this list.

Cisco–Router · Not specified–Not specifiedCisco router

Model not specified by this list.

Cisco–Router · Not specified–bbsd-clientchangeme2

Model not specified by this list.

Cisco–Router · Not specified–rootsecur4u

Model not specified by this list.

Cisco–Router · Not specified–No username requiredCisco

Model not specified by this list.

Cisco–Router · Not specified–No username requiredcisco

Model not specified by this list.

CiscoAP1200 Rev. IOSAccess point · MULTI–CiscoCisco

Defaults may depend on the listed model, revision, firmware or ISP.

CiscoRV160Router · Webhttps://192.168.1.1 (opens in a new tab)http://192.168.1.1 (opens in a new tab)ciscocisco

Cisco Small Business's first coverage in the dataset — RV160 is the entry 4-port Gigabit VPN router with a single WAN port, the smallest of the RV-series trio alongside the dual-WAN RV340/RV345. Official Cisco RV160 Quick Start Guide: "Enter the username and password. The default username is cisco. The default password is cisco. Passwords are case-sensitive." The setup wizard prompts a password change on first login.

Recovery & reset instructions

Press and hold the rear RESET button with a paperclip/pen tip for more than 10 seconds to restore factory default configuration; a shorter 3-10 second hold just reboots without erasing config.

CiscoRV340Router · Webhttps://192.168.1.1 (opens in a new tab)http://192.168.1.1 (opens in a new tab)ciscocisco

Dual-WAN Gigabit VPN router with a 4-port switch — the mid-tier RV-series model, above the single-WAN RV160 and below the 16-port RV345. Official Cisco RV340 Quick Start Guide: "Enter the username and password. The default username is cisco. The default password is cisco. Passwords are case-sensitive." The Router Setup Wizard launches on first login.

Recovery & reset instructions

Press the reset button with a paperclip/pen tip for less than 10 seconds to reboot, or hold for at least 30 seconds to restore factory default settings.

CiscoRV345 / RV345PRouter · Webhttps://192.168.1.1 (opens in a new tab)http://192.168.1.1 (opens in a new tab)ciscocisco

16-port Gigabit dual-WAN VPN router — the top of the RV-series trio, built for larger small-business deployments than the 4-port RV160/RV340. Official Cisco RV345/RV345P Quick Start Guide: "Enter the username and password. The default username is cisco. The default password is cisco. Passwords are case-sensitive."

Recovery & reset instructions

Press the reset button with a paperclip/pen tip for less than 10 seconds to reboot, or hold for at least 30 seconds to restore factory default settings.

Related login addresses

GET CONNECTED

How to reach your router

  1. Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
  2. Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
  3. Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.

Admin password or Wi-Fi password?

The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.

If the password does not work

Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.

Find your model’s manual →

Sources & data

Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.

Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.