ROUTER & MODEM REFERENCE

BT router & modem login

Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.

QUICK START

Most likely login options

See every listed combination ↓

Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.

Check the device label

Username: No username required
Password / access: Password on the device label

Access: Web

Smart Hub 2

Source (opens in a new tab)

Default credentials

Username: admin
Password / access: admin

Access: Not specified

Model not specified; check the table for applicability.

Source (opens in a new tab)

Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.

MODEL DETAILS

Login addresses & credentials

2 records

Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.

Models, login addresses, credentials, instructions and sources
Model / device	Login address	Username	Password / access	Notes & source
BT–Router · Not specified	–	admin	admin	Model not specified by this list. Austin Songer list (opens in a new tab)
BTSmart Hub 2Modem / gateway · Web	http://bthomehub.home (opens in a new tab)http://192.168.1.254 (opens in a new tab)	No username required	Password on the device label	There is no admin/admin default. Each BT Smart Hub 2 ships with a unique admin password printed on the pull-out settings card on the back (or the base label). The admin password is separate from the WiFi key. Manufacturer (opens in a new tab) Recovery & reset instructions To log in: connect to the hub, open a browser and go to bthomehub.home or 192.168.1.254, then enter the admin password. The admin password is on the pull-out settings card on the back of the hub (and on the base label). It is not your WiFi key. To factory reset: with the hub powered on, press and hold the recessed Reset button on the back for about 20 seconds until the lights flash; the hub reboots and all settings, including the admin password, revert to those printed on the card.

Related login addresses

GET CONNECTED

How to reach your router

Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.

Admin password or Wi-Fi password?

The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.

If the password does not work

Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.

Find your model’s manual →

Sources & data

Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.

Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.