Skip to content
Manuals+

ROUTER & MODEM REFERENCE

Breezecom router & modem login

Login addresses, default credentials, and setup instructions for Breezecom equipment.

A shared web login address is not listed for this equipment. Check the model instructions below for app access, the device label, or your router’s gateway address.

Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.

QUICK START

Most likely login options

See every listed combination ↓

Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.

Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.

MODEL DETAILS

Login addresses & credentials

13 records

Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.

Models, login addresses, credentials, instructions and sources
Model / deviceLogin addressUsernamePassword / accessNotes & source
Breezecom–Router · Not specified–No username requiredHelpdesk

Model not specified by this list.

Breezecom–Router · Not specified–Not specifiedMaster

Model not specified by this list.

Breezecom–Router · Not specified–Not specifiedlaflaf

Model not specified by this list.

Breezecom–Router · Not specified–No username requiredMaster

Model not specified by this list.

Breezecom–Router · Not specified–No username requiredlaflaf

Model not specified by this list.

Breezecom–Router · Not specified–No username requiredLeave blank

Model not specified by this list.

Breezecom–Router · Not specified–No username requiredSuper

Model not specified by this list.

Breezecom–Router · Not specified–Not specifiedSuper

Model not specified by this list.

Breezecom–Router · Not specified–Not specifiedHelpdesk

Model not specified by this list.

BreezecomBREEZECOM ADAPTERS Rev. 2.XRouter · Not specified–Not specifiedlaflaf

Defaults may depend on the listed model, revision, firmware or ISP.

BreezecomBREEZECOM ADAPTERS Rev. 3.XRouter · Not specified–Not specifiedMaster

Defaults may depend on the listed model, revision, firmware or ISP.

BreezecomBREEZECOM ADAPTERS Rev. 4.4.XRouter · CONSOLE–Not specifiedHelpdesk

Defaults may depend on the listed model, revision, firmware or ISP.

BreezecomBREEZECOM ADAPTERS Rev. 4.XRouter · Not specified–Not specifiedSuper

Defaults may depend on the listed model, revision, firmware or ISP.

GET CONNECTED

How to reach your router

  1. Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
  2. Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
  3. Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.

Admin password or Wi-Fi password?

The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.

If the password does not work

Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.

Find your model’s manual →

Sources & data

Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.

Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.