ASUS router & modem login

The Quick Internet Setup wizard forces you to create your own admin login name and password on first login — no admin/admin default. To factory reset: with the router on, press and hold the RESET button (rear) for 5-10 seconds until the power LED flashes, release, and wait for reboot. Re-run setup at http://router.asus.com (192.168.50.1) and set a new admin password.

Setup on first login compels you to create your own admin login and password — nothing is shipped preset. Factory reset: with the router on, hold the rear RESET button 5-10 seconds until the power LED flashes, release, and let it come back up. Re-run setup at http://router.asus.com (192.168.50.1) and pick a new admin password.

On current firmware the Quick Internet Setup wizard requires you to create your own admin login and password. To factory reset: with the router on, hold the rear RESET button 5-10 seconds until the power LED flashes, release, and wait for reboot. Then browse to http://router.asus.com (192.168.1.1) and set a new admin password.

Hold the hardware Reset button for at least 5 seconds until the power LED starts to flash.

On current firmware the setup wizard forces you to create your own admin login and password on first login. To factory reset: with the router on, press and hold the RESET button (rear) for 5-10 seconds until the power LED flashes, release, and wait for reboot. Then browse to http://router.asus.com (192.168.1.1) and set a new admin password.

Whether it is a brand-new unit or one just reset, the setup wizard requires a self-created admin login and password — no default is provided. Factory reset: power on, press and hold RESET at the rear for 5-10 seconds until the power LED flashes, release, and let it reboot. Then set a new admin password from http://router.asus.com (192.168.50.1).

Hold the Reset button on the back for at least 5 seconds until the power LED starts flashing.

Press and hold the WPS/Reset button on the rear panel for more than 5 seconds until the power LED flashes, then release to restore factory default settings.

First access runs Quick Internet Setup, which requires you to invent both the admin account name and its password; there is no factory pair to fall back on. Factory reset: with power applied, press the RESET button on the rear for 5-10 seconds until the power LED blinks, let go, and let it restart. Re-run the wizard at http://router.asus.com (192.168.50.1) to pick a new password.

On first login or after a reset, the Quick Internet Setup wizard forces you to create your own admin login name and password — no admin/admin default. To factory reset: with the router on, press and hold the RESET button (rear, near the WAN port) for 5-10 seconds until the power LED flashes, release, and wait for reboot. Then browse to http://router.asus.com (192.168.50.1) and set a new admin password.

The wizard on first login makes you build your own admin login and password, so no factory password is documented. To restore defaults: with the unit running, hold RESET at the back 5-10 seconds until the power LED flashes, release, and allow the reboot. Set the admin password once more via http://router.asus.com (192.168.50.1).

Hold the Reset button on the back for at least 5 seconds until the power LED starts flashing, then release.

Press and hold the rear Reset button for at least 5 seconds until the power LED starts flashing, to restore factory defaults, then re-run Quick Internet Setup (QIS).

Press and hold the recessed Reset button on the rear until the power LED flashes (about 5-10 seconds), then complete the Quick Internet Setup (QIS) to set a new login.

Press and hold the recessed Reset button on the rear until the power LED starts flashing (about 5-10 seconds), then re-run the Quick Internet Setup (QIS) to create a new login.

Press and hold the rear Reset button for at least 5 seconds until the power LED starts flashing, to restore factory defaults, then re-run Quick Internet Setup (QIS).

Hold the Reset button on the back at least 5 seconds until the power LED flashes, then release; on the Quick Internet Setup that follows you create the router login account and password.

Press and hold Reset at least 5 seconds until the power LED blinks, release to factory-reset, then complete Quick Internet Setup where you choose the admin login and password.

No default exists because QIS forces a self-chosen admin login name and password at first access. For a factory reset, keep the rear RESET button held 5-10 seconds with the router on, until the power LED flashes; release and wait out the reboot. Then re-run QIS at http://router.asus.com (192.168.50.1) and choose the admin password again.

During ASUS Router app or web setup (Quick Internet Setup), you create your own admin login name and password — there is no fixed default password. To factory reset: with the node powered on, press and hold the RESET button (recessed, next to the ports on the back) for 5-10 seconds until the power LED starts flashing, then release and wait for it to reboot. Re-run setup via the ASUS Router app or by browsing to http://router.asus.com (192.168.50.1) and create a new admin password.

Initial setup through the ASUS Router app forces you to create your own admin login and password — no default password ships. To factory reset a node: power it on, press and hold the RESET button on the bottom for 5-10 seconds until the LED flashes, release, and wait for reboot. Re-run setup at http://router.asus.com (192.168.50.1) to set a new admin password.

Press and hold the Reset button on the rear of a node until the LED indicates a reset, then re-run setup via a web browser (redirects to the ASUS Setup Wizard) or the ASUS Router App to create a new login.

Press the Reset button to restore factory defaults, then complete Quick Internet Setup (QIS), which forces a new login username and password.

During first setup (ASUS Router app or Quick Internet Setup) you create your own admin login and password — nothing ships pre-set. To factory reset: power the node on, press and hold the RESET button 5-10 seconds until the power LED flashes, release, and wait for reboot. Re-run setup at http://router.asus.com (192.168.50.1) to define a new admin password.

Hold the rear Reset button until the power LED flashes to restore defaults; Quick Internet Setup (QIS) then runs again and makes you set a new login name and password.

Quick Internet Setup (web or ASUS Router app) requires you to create your own admin login name and password — no default password. To factory reset: with the unit on, hold the rear RESET button 5-10 seconds until the power LED flashes, then release and let it reboot. Re-run setup at http://router.asus.com (192.168.50.1) and set a new admin password.

Setup (ASUS Router app or Quick Internet Setup) makes you choose your own admin login name and password — no fixed default. To factory reset: power the node on, press and hold the rear RESET button 5-10 seconds until the power LED flashes, release, and let it reboot. Re-run setup at http://router.asus.com (192.168.50.1) and set a new admin password.