Use the vendor app
- Username
- Not specified
- Password / access
- Vendor app or account
Access: App
Instant On AP11, Instant On AP22
Source (opens in a new tab)ROUTER & MODEM REFERENCE
Aruba router & modem login
Login addresses, default credentials, and setup instructions for Aruba equipment.
A shared web login address is not listed for this equipment. Check the model instructions below for app access, the device label, or your router’s gateway address.
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| Aruba–Router · Not specified | – | admin | admin | Model not specified by this list. |
| ArubaInstant On AP11Router · App | App / account access | Not specified | Vendor app or account | Listed as Aruba (HPE). No universal default credentials. The AP is managed entirely via an Instant On account you create; the account password (not admin/admin) is your login. Recovery & reset instructionsThe Instant On AP11 is configured through the HPE Networking Instant On mobile app (or web app). Install the app, choose 'Create an account', register with your own email and a self-chosen password, verify by email, then let the app find and set up the AP — no built-in admin password exists. To factory reset, with the AP powered on press and hold the Reset button for about 1–15 seconds until the LED signals a reset, then re-onboard it in the app. |
| ArubaInstant On AP22Router · App | App / account access | Not specified | Vendor app or account | Listed as Aruba (HPE). No default admin/admin. Access is via an Instant On cloud account you create (your email + your chosen password); the same account manages the AP locally and remotely. Recovery & reset instructionsThe Instant On AP22 is set up through the HPE Networking Instant On mobile app (or the web app at instant-on.hpe.com). Install the app, tap 'Create an account', register with your own email and a password you choose, verify by email, then follow the app to discover and configure the AP — there is no factory admin password. To factory reset, with the AP powered on hold the Reset button for about 1–15 seconds until the LED indicates reset, then re-add it in the app. |
No records match these filters. Try another model or clear the filters.
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.