Use your setup password
- Username
- admin
- Password / access
- Password created during setup
Access: Web
RTA2600-R2 (Athena-R2)
Source (opens in a new tab)ROUTER & MODEM REFERENCE
Amped Wireless router & modem login
Login addresses, default credentials, and setup instructions for Amped Wireless equipment.
Open router login http://setup.ampedwireless.com (opens in a new tab)Open router login http://192.168.3.1 (opens in a new tab)
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| Amped WirelessALLY-R1900Mesh system · App | http://setup.ampedwireless.com (opens in a new tab) | Not specified | Vendor app or account | Whole Home Smart Wi-Fi mesh system, dual-band — a distinct product category from the same run's standalone RTA2600-R2 router. Official Amped Wireless ALLY-R1900 Setup Guide states: "You will be prompted for a password which can be found on the ALLY app by going to Settings... and then going to Advanced settings." No static default password is documented; the login page requires the app-generated, per-device password. Recovery & reset instructionsHold the reset button for 5-10 seconds to restore factory defaults; re-pair using the ALLY app. |
| Amped WirelessRTA2600-R2 (Athena-R2)Router · Web | http://setup.ampedwireless.com (opens in a new tab)http://192.168.3.1 (opens in a new tab) | admin | Password created during setup | Amped Wireless's first row in the dataset — High Power AC2600 dual-band Wi-Fi router with MU-MIMO, 4 high-gain antennas. Official Amped Wireless RTA2600-R2 Setup Guide states of the admin password field: "This password is NOT your Wi-Fi connection password... Leave this blank if you do not wish to have a password." No admin password is set out of the box until the user creates one. Recovery & reset instructionsHold the reset button on the back panel for 5-10 seconds until it reboots to factory defaults (no admin password set). |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.