Default credentials
- Username
- admin
- Password / access
- password
Access: Web
GT704-WG, MI424WR (Verizon FiOS), W1424WR
Source (opens in a new tab)ROUTER & MODEM REFERENCE
Actiontec router & modem login
Login addresses, default credentials, and setup instructions for Actiontec equipment.
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| Actiontec–Router · Not specified | – | admin | admin | Model not specified by this list. |
| Actiontec–Router · Not specified | – | No username required | Leave blank | Model not specified by this list. |
| Actiontec–Router · Not specified | – | admin | password | Model not specified by this list. Verizon Fios Setup |
| ActiontecGE344000-01Router · HTTP | – | No username required | Leave blank | Defaults may depend on the listed model, revision, firmware or ISP. |
| ActiontecGT704-WGRouter · HTTP | – | admin | password | Defaults may depend on the listed model, revision, firmware or ISP. |
| ActiontecMI424WR (Verizon FiOS)Modem / gateway · Web | http://192.168.1.1 (opens in a new tab) | admin | password | Verizon's official Actiontec manual documents the default login as admin / password, after which the router forces you to choose your own credentials. Be aware later revisions (rev C/D and many field-installed FiOS units) instead use a unique password derived from the serial number and printed on the device label. Recovery & reset instructionsOpen a browser to http://192.168.1.1 and log in with admin / password; the router then prompts you to set your own username and password. If that fails, press and hold the Reset button on the back for about 10-15 seconds until it reboots. Note: many FiOS units use a unique password printed on the label instead — check the sticker if admin/password is rejected. |
| ActiontecR1520SURouter · HTTP | – | admin | Leave blank | Defaults may depend on the listed model, revision, firmware or ISP. |
| ActiontecW1424WRRouter · HTTP | – | admin | password | Defaults may depend on the listed model, revision, firmware or ISP. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.