LOCKLY 202007 Smart Lock 

Installation Evaluation Form

1. Please list out the model(s) of the Lockly smart lock that you would like to install (may list more than one model).
   
2. Please select your installation requirements (For each category, please choose only one answer from the list of answer choices).

Where To Install

Front Door

Please answer if Front Door is selected
With Metal Gate
Without Metal Gate

Room Door

Metal Gate

Status

Brand New Without Bore Hole
With Bore Hole/Door Lock*
Type

Single Door 
Slide Gate

Double Door

Swing Gate

Material

Wooden or Timber

Iron/Steel/Metal#

Glass/Alumnium Glasss#

May involve additional processing charges

*Please select the type of lock that you’re using

For door installation, please provide (1) the thickness of the door and (2) the door backset

1. Thickness of Door
2. Door Backset
   

Is there a door edge on the frame? If yes, please provide the thickness.

Yes, the thickness of edge is


No Edge


No
For door installation with a metal gate, please provide (1) the distance between the door and the gate.
a Distance between mm the door and the gate

Please also provide designated photos for our reference when sumitting this form.
Please refer to the Appendix for details.

Appendix (I) Photo Checklist

i) Front View, Back View & Side View Photos of the Door or the Gate that you would like to install a Lockly smart
ii) Photos of the lock that you’re using (For a door/gate with existing door lock only).

Front View

BackView

Side View

Existing door Lock

Documents / Resources

LOCKLY 202007 Smart Lock [pdf] Instructions 202007, 202007 Smart Lock, Smart Lock, Lock

References

• User Manual