LOCKED LP-V1 Paper Void-Fill and Light Load Blocking System
Power on
- Connect the pedal to the machine
- Plug the power cord and snap on the buckle
- Turn on the power switch
Feeding
- Step 1: Wind the paper on the tray around the shaft according to the arrow.
- Step 2: Press the feed button. Feeding is successful when paper appears at the outlet.
Operation
- Parameter range: output length (10~999cm), output pads (1~99999 pcs,) output speed (3 settings, third setting recommended)
- Triggered by: Pedal or
button - Working status:
The machine is working. The machine is stopped
Documents / Resources
 |
LOCKED LP-V1 Paper Void-Fill and Light Load Blocking System [pdf] User Guide V1.1, LP-V1 Paper Void-Fill and Light Load Blocking System, Paper Void-Fill and Light Load Blocking System, Void-Fill and Light Load Blocking System, Light Load Blocking System, Load Blocking System, Blocking System |