LOCKED IB500C Paper Bubble Wrap Machine
Specifications
- Model: LP-IB500C
- Version: V1.1
- Power: Electric
- Output Length Parameter Range: 10~999cm
- Output Speed Settings: 3, third setting recommended
- Trigger Options: Pedal or button
Product Usage Instructions
Power On:
- Connect the pedal to the machine.
- Plug in the power cord.
- Ensure the E-stop button is released.
- Turn on the power switch.
Feeding:
- Open the safety cover.
- Turn the handle to the OP position.
- Wind the paper following the arrow.
- Press the feed button.
- Turn the handle to the CL position.
- Close the safety cover.
NOTE: Ensure kraft paper enters the feeding inlet with both sides flush to prevent machine jams or paper tearing.
Operation:
Working Status:
- The machine is working.
- The machine is stopped.
Mode:
- Operation: Press pedal or button to start, release to stop.
- The paper length depends on trigger time, shortest length produced when released immediately after triggering.
- The paper pad is dispensed according to a preset length.
- Automatic Mode: Press the pedal or button to start, stops automatically after completion.
Power on
- Connect the pedal to the machine
- Plug the power cord
- Make sure the E-stop button is released
- Turn on the power switch
Feeding
- Step 1: Open the safety cover.
- Step 2: Turn the handle to the OP position.
- Step 3: Wind the paper following the arrow.
- Step 4: Press the feed button.
- Step 5: Turn the handle to the CL position.
- Step 6: Close the safety cover.
NOTE: Please ensure the Kraft paper enters the feeding inlet with both sides flush. Incorrect feeding maycausemachine jams or paper tearing.
Operation
- Parameter range: output length (10~999cm) output speed (3 settings, third setting recommended)
- Trigger by: Pedal or
button - Working status:
The machine is working The machine is stopped
FAQs
- Q: What should I do if the machine jams during operation?
- A: If the machine jams, turn off the power switch, clear the jammed paper carefully following the manual instructions, and then restart the machine.
- Q: How can I adjust the output length parameter?
- A: To adjust the output length parameter, refer to the user manual for detailed instructions on changing the settings on the machine interface.
Documents / Resources
 |
LOCKED IB500C Paper Bubble Wrap Machine [pdf] Installation Guide IB500C Paper Bubble Wrap Machine, IB500C, Paper Bubble Wrap Machine, Bubble Wrap Machine, Wrap Machine |