IP20 Rating
The Nordlux Cody lamp is rated IP20. This means it is protected against solid objects greater than 12.5mm (like fingers) but offers no protection against water ingress. Therefore, the lamp must only be installed in areas where direct contact with water cannot occur.
(This information is provided in multiple languages throughout the document.)
Electrical Safety: Class II
The lamp is Class II, meaning it is double-insulated. It does not require a connection to the installation's earth wire (typically yellow/green).
(This information is provided in multiple languages throughout the document.)
Connection Type: Z-Connection
The lamp features a Z-connection, indicating that its connection wire cannot be replaced. If the wire is damaged, the lamp must be discarded.
(This information is provided in multiple languages throughout the document.)
Maximum Wattage
The maximum wattage for the bulb is 15W. Do not exceed this limit.
(This information is provided in multiple languages throughout the document.)
Important: Keep Mounting Instructions
The mounting instructions should be kept and not discarded.
(This information is provided in multiple languages throughout the document.)
Disposal of Electrical and Electronic Equipment (WEEE)
This product, like other electrical and electronic equipment, contains materials that can be harmful to human health and the environment if not recycled correctly. The symbol of a crossed-out wheeled bin indicates that this product should not be disposed of with regular household waste. Users in private households within the EU are responsible for handing over their waste electrical and electronic equipment to designated collection points for recycling. Proper recycling helps prevent unnecessary strain on nature and the environment and protects human health. For more information, contact local authorities, waste disposal services, or the retailer where the product was purchased.
(This information is provided in multiple languages throughout the document.)
General Maintenance and Care
To clean the lamp, use a soft, dry cloth for dusting. For grease stains or similar, use a soft cloth wrung in lukewarm water (<50°C) with a mild detergent. Never use detergents containing abrasive or solvent materials. Ensure all water has evaporated before switching the lamp on.
Care for Mouth-Blown Glass
Mouth-blown glass is formed manually. Due to this unique process, air bubbles may occur in the glass, and the thickness may vary. These are natural consequences of the manual process and contribute to the glass's character and organic look. Always clean mouth-blown glass while it is cold.
(This information is provided in multiple languages throughout the document.)
