1. ບົດແນະນຳ
This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNT PRO Single Monitor Desk Mount. This adjustable gas spring monitor arm is designed to enhance your workspace ergonomics and efficiency by providing flexible positioning for your monitor.
The mount is compatible with most flat or curved LCD/LED screens ranging from 13 to 32 inches, supporting a maximum load capacity of 22 lbs. It is suitable for VESA patterns of 75x75mm and 100x100mm.
2. ຂໍ້ມູນຄວາມປອດໄພ
- ຄວາມອາດສາມາດນ້ໍາຫນັກ: Do not exceed the maximum load capacity of 22 lbs (10 kg). Overloading can cause instability and potential injury.
- ຄວາມເຂົ້າກັນໄດ້ກັບ VESA: Ensure your monitor has VESA mounting holes (75x75mm or 100x100mm).
- ຄວາມໜາຂອງໂຕະ: Verify your desk thickness is within the supported range of 0.39 to 2.76 inches (10-70mm) for both clamp ແລະການຕິດຕັ້ງ grommet.
- ພື້ນຜິວຄົງທີ່: Install the mount on a stable and sturdy desk surface that can support the combined weight of the mount and your monitor.
- Pinch Points: Be aware of pinch points during assembly and adjustment. Keep hands clear of moving parts.
- ການປັບລະດັບອາຍແກັສ: When adjusting the gas spring tension, always hold the arm in a horizontal position to prevent sudden movement.
- ເດັກນ້ອຍ: ຮັກສາສ່ວນນ້ອຍໆຢູ່ຫ່າງຈາກເດັກນ້ອຍ.
3. ເນື້ອໃນຊຸດ
ກະລຸນາກວດສອບວ່າອົງປະກອບທັງໝົດມີຢູ່ກ່ອນທີ່ຈະເລີ່ມການຕິດຕັ້ງ:
- ຕິດຕາມການປະກອບອາວຸດ
- ແຜ່ນ VESA
- C-Clamp ຖານ
- ຖານ Grommet
- ອຸປະກອນຕິດຕັ້ງ (ສະກູ, ແຜ່ນຮອງ, ຕົວແຍກ)
- Allen Keys (for assembly and adjustment)
ຮູບພາບ: ຫຼາຍກວ່າview of the MOUNT PRO Single Monitor Desk Mount, showing the arm, C-clamp ຖານ, ແລະພື້ນຖານ grommet.
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
4.1 ລາຍການກວດສອບການຕິດຕັ້ງລ່ວງໜ້າ
- ຕິດຕາມຄວາມເຂົ້າກັນໄດ້: Ensure your monitor is between 13-32 inches and weighs between 4.4-22 lbs.
- ຮູບແບບ VESA: Confirm your monitor has VESA 75x75mm or 100x100mm mounting holes. If your monitor does not have VESA holes, a VESA adapter (sold separately) may be required.
- Desk Compatibility: Measure your desk thickness. It must be between 0.39 and 2.76 inches (10-70mm). For grommet mounting, the hole diameter should be 0.39-2.36 inches (10-60mm).
Image: Visual guide for monitor compatibility, showing supported screen sizes (13-32 inches), load capacity (4.4-22 lbs), and VESA patterns (75x75mm/100x100mm).
Image: Instructions on checking for VESA holes on a monitor and the option to use a VESA adapter for monitors without them.
4.2 ເລືອກຕົວເລືອກການຕິດຕັ້ງຂອງທ່ານ
The MOUNT PRO monitor arm offers two installation methods: C-Clamp and Grommet Base.
Image: Diagram illustrating the two mounting options: Grommet Mounting (left) and Clamp Mounting (right), with desk thickness requirements.
4.2.1 C-Clamp ການຕິດຕັ້ງ
- ຄັດຕິດ C-clamp base to the bottom of the monitor arm pole.
- ວາງ C-clamp ຢູ່ແຄມໂຕະເຮັດວຽກຂອງທ່ານ.
- ແຫນ້ນ clamp ໝຸນຈົນກວ່າຕົວຍຶດຈະຖືກຍຶດຕິດກັບໂຕະຢ່າງແໜ້ນໜາ. ຮັບປະກັນວ່າມັນໝັ້ນຄົງ ແລະ ບໍ່ສັ່ນ.
4.2.2 Grommet Base Installation
- ຖ້າໂຕະຂອງເຈົ້າມີຮູຂຸມຂົນ, ໃຫ້ໃສ່ຖານເກຣມຜ່ານຮູ.
- Secure the grommet base from underneath the desk using the provided washer and nut.
- Attach the monitor arm pole to the grommet base and tighten securely.
4.3 Attaching the Monitor
- Attach the VESA plate to the back of your monitor using the appropriate screws and spacers from the hardware kit. Ensure the plate is oriented correctly.
- Slide the VESA plate with the attached monitor onto the monitor arm's mounting head.
- Secure the monitor by tightening the locking screw on the VESA plate mechanism.
ຮູບພາບ: ໃກ້ຊິດ view demonstrating the quick removable VESA plate and how it slides into the monitor arm for secure attachment.
5. ການດໍາເນີນງານແລະການປັບຕົວ
The MOUNT PRO monitor arm offers various adjustments for optimal viewໃນຄວາມສະດວກສະບາຍແລະຜົນຜະລິດ.
5.1 Gas Spring Tension Adjustment
The gas spring allows for smooth height adjustments. The tension may need to be adjusted based on your monitor's weight.
- To raise the monitor up (for lighter monitors): Turn the adjustment screw clockwise (towards the "-" direction) to reduce tension.
- To drop the monitor down (for heavier monitors): Turn the adjustment screw counter-clockwise (towards the "+" direction) to increase tension.
- ສຳຄັນ: Always hold the arm in a horizontal position when adjusting the gas spring tension to prevent sudden movement. The number of turns depends on the display's weight and may take up to 17 turns.
Image: Diagram showing how to adjust the gas spring tension using an Allen key, with instructions for increasing ຫຼື decreasing ຄວາມເຄັ່ງຕຶງ.
5.2 ການອຽງ, ການໝຸນ ແລະ ການໝຸນ
These adjustments allow you to customize your monitor's position for ergonomic viewing.
- ອຽງ: Adjust the monitor tilt from +85° to -45° to reduce glare and find your ideal viewing angle. Loosen the tilting bolt, adjust to desired angle, then retighten.
- ໝູນ: Swivel the monitor +/-90° for easy screen sharing or collaborative work.
- ໝຸນ: ໝຸນຈໍພາບ 360° ເພື່ອສະຫຼັບລະຫວ່າງທິດທາງພູມສັນຖານ ແລະ ແນວຕັ້ງ.
Image: Visual representation of the monitor arm's adjustable range, including tilt (+85° to -45°), swivel (180°), and rotation (360°).
5.3 ການຈັດການສາຍ
The monitor arm features integrated cable management to keep your workspace tidy.
- Route your monitor cables through the designated channels on the arm.
- The lower arm also conveniently stores Allen keys for future use.
Image: Depiction of the monitor arm's cable management system and the integrated storage for Allen keys.
6. ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: ເຊັດແຂນຂອງຈໍພາບດ້ວຍຜ້າອ່ອນໆ, ງamp ຜ້າ. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- ກວດສອບເປັນໄລຍະ: ກວດເບິ່ງທຸກສະກູແລະການເຊື່ອມຕໍ່ເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນແຫນ້ນແຫນ້ນແລະປອດໄພ. ຮັດແໜ້ນ ຖ້າຈຳເປັນ.
- ອາຍແກັສ Spring: The gas spring is designed for long-lasting performance and typically requires no maintenance. If adjustments become difficult, refer to the tension adjustment section.
7. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Monitor sags or drops after adjustment. | ຄວາມກົດດັນຂອງພາກຮຽນ spring ອາຍແກັສແມ່ນຕໍ່າເກີນໄປສໍາລັບນ້ໍາຫນັກຂອງຈໍສະແດງຜົນ. | Increase gas spring tension by turning the adjustment screw counter-clockwise (towards "+"). Refer to Section 5.1. |
| Monitor arm is too stiff to adjust. | Gas spring tension is too high. | Decrease gas spring tension by turning the adjustment screw clockwise (towards "-"). Refer to Section 5.1. |
| Monitor wobbles after installation. | Mount ບໍ່ໄດ້ຖືກຍຶດຢ່າງປອດໄພກັບໂຕະເຮັດວຽກຫຼືແຜ່ນ VESA ວ່າງ. | ຮັບປະກັນ C-clamp or grommet base is tightened securely. Check that the VESA plate locking screw is tight. |
| ຈໍພາບບໍ່ພໍດີກັບແຜ່ນ VESA. | ຮູບແບບ VESA ບໍ່ຖືກຕ້ອງ ຫຼືຂະໜາດຈໍພາບ. | Verify your monitor's VESA pattern (75x75mm or 100x100mm) and size (13-32 inches). A VESA adapter may be needed for non-compatible monitors. |
8. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຍີ່ຫໍ້ | mount PRO |
| ຕົວແບບ | Freelift Pro Black Single |
| ຂະຫນາດຫນ້າຈໍເຂົ້າກັນໄດ້ | 13 - 32 ນິ້ວ |
| ຄວາມອາດສາມາດໂຫຼດ | 4.4 - 22 lbs (2 - 10 kg) |
| ຄວາມເຂົ້າກັນໄດ້ຂອງ VESA | 75x75mm, 100x100mm |
| ວັດສະດຸ | ອາລູມີນຽມ |
| ສີ | ດຳ |
| ປະເພດການຕິດຕັ້ງ | Tabletop Mount (Clamp ຫຼື ກຣອມເມັດ) |
| ຄວາມໜາຂອງໂຕະໂຕະ (ຄລamp/Grommet) | 0.39 - 2.76 inches (10 - 70mm) |
| ເສັ້ນຜ່າສູນກາງຮູ Grommet | 0.39 - 2.36 inches (10 - 60mm) |
| ມຸມອຽງ | +85° ເຖິງ -45° |
| ມຸມຫມຸນ | +/-90° (ທັງໝົດ 180°) |
| ພືດຫມູນວຽນ | 360° |
| Max Arm Extension | 19.7 ນິ້ວ (50 ຊຕມ) |
| Max Height Above Desk | 17.3 ນິ້ວ (44 ຊຕມ) |
| ນ້ໍາຫນັກລາຍການ | 5.15 ປອນ (2.34 ກິໂລ) |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information and customer support, please refer to the official MOUNT PRO website or contact their customer service directly. You can also find additional installation details in the official PDF manual:
ດາວໂຫລດຄູ່ມືການຕິດຕັ້ງຢ່າງເປັນທາງການ (PDF)
For further assistance, please contact MOUNT PRO customer support through their official channels.
