ຄູ່ມືຜູ້ໃຊ້ເຄື່ອງກວ້າວໄຟຟ້າ VEVOR 3000 lb

1. ບົດແນະນຳ

This manual provides essential information for the safe and effective installation, operation, and maintenance of your VEVOR 3000 lb Electric Winch. Please read and understand all instructions and warnings before using the product. Proper use and maintenance will ensure optimal performance and extend the lifespan of your winch.

2. ຂໍ້ມູນຄວາມປອດໄພ

Always prioritize safety when operating the winch. Failure to follow these safety guidelines can result in serious injury or property damage.

• ອ່ານຄູ່ມື: ເຂົ້າໃຈຂັ້ນຕອນການດໍາເນີນງານ ແລະ ຄໍາເຕືອນດ້ານຄວາມປອດໄພທັງໝົດກ່ອນການນໍາໃຊ້.
• ໃສ່ອຸປະກອນປ້ອງກັນ: Always wear heavy-duty gloves and eye protection.
• ກວດ​ສອບ​ກ່ອນ​ການ​ນໍາ​ໃຊ້​: Check the winch, cable, hook, and all connections for damage or wear before each operation. Do not use if damaged.
• ລະດັບຄວາມອາດສາມາດ: Never exceed the winch's rated pulling capacity of 3000 lbs. Use a snatch block to double the line if necessary for heavier loads.
• ຮັກສາໄລຍະຫ່າງທີ່ປອດໄພ: Keep hands, hair, clothing, and jewelry clear of the cable, hook, and fairlead during operation. Stand clear of the cable's path.
• ຈຸດຍຶດທີ່ປອດໄພ: Always use a strong, stable, and reliable anchor point for recovery operations.
• ຄວາມປອດໄພສາຍ: Never handle the cable under tension. Do not wrap the cable around an object and hook it back onto itself, as this can damage the cable.
• ການເຊື່ອມຕໍ່ຫມໍ້ໄຟ: Ensure proper battery connections (12V DC). Avoid short circuits.
• ຫຼີກ​ລ້ຽງ​ການ​ຮ້ອນ​ເກີນ​ໄປ​: Do not operate the winch continuously for extended periods. Allow the motor to cool down between pulls.
• ຣີໂໝດໄຮ້ສາຍ: Keep the wireless remote control away from children and unauthorized users. Ensure the operator is in a safe position with a clear view ຂອງ​ການ​ດໍາ​ເນີນ​ງານ winching ໄດ້​.
• Red Cable Mark: The last 5 rolls of the cable are marked red as a safety alert. Do not extend the cable beyond this point during operation.

3. ຜະລິດຕະພັນເກີນview

The VEVOR 3000 lb Electric Winch is designed for reliable pulling and recovery tasks. It features a robust motor, durable steel cable, and an IP55 waterproof rating for outdoor use.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• ມໍເຕີທີ່ມີປະສິດທິພາບ: Equipped with a differential Planetary Gear for high performance and stability, operating on 12V DC input.
• ການອອກແບບກັນນ້ໍາ IP55: Built to withstand harsh outdoor environments, including mud, rain, and snow.
• High-Strength Steel Cable: Features a 19-strand steel cable for reliable pulling operations. The last 5 rolls are marked red for safety.
• ການຄວບຄຸມໄລຍະໄກໄຮ້ສາຍ: Allows for safe operation from a distance of up to 66 feet (20 meters).
• ຄໍາຮ້ອງສະຫມັກອະເນກປະສົງ: Suitable for ATVs, UTVs, SUVs, trucks, cars, trailers, and boats within its rated pulling force.

ອົງປະກອບ:

The winch system typically includes the winch unit, steel cable with hook, fairlead, control box, wired controller, wireless remote control, mounting plate, and a set of screws.

ຮູບທີ 3.1: VEVOR 3000 lb Electric Winch. This image shows the complete winch unit with the steel cable spooled, the hook attached, and the fairlead mechanism.

ຮູບທີ 3.2: Internal motor design. This illustration highlights the 3-stage planetary gear system and motor components, indicating 12V DC voltage, 1.3 horsepower, 1800 RPM rated speed, and 3.2 Nm rated torque.

ຮູບທີ 3.3: High-strength steel cable. The image shows a close-up of the 19-strand steel rope, emphasizing its sturdy, durable, and wear-proof construction for safe operation.

ຮູບທີ 3.4: IP55 waterproof design. This image illustrates the winch's resistance to water and mud, confirming its suitability for outdoor operations in challenging weather conditions.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

ການຕິດຕັ້ງທີ່ຖືກຕ້ອງແມ່ນມີຄວາມສຳຄັນຫຼາຍຕໍ່ການເຮັດວຽກທີ່ປອດໄພ ແລະ ມີປະສິດທິພາບຂອງເຄື່ອງກວ້າວຂອງທ່ານ. ຖ້າທ່ານບໍ່ແນ່ໃຈກ່ຽວກັບຂັ້ນຕອນໃດໆ, ໃຫ້ປຶກສາຜູ້ຊ່ຽວຊານທີ່ມີຄຸນວຸດທິ.

4.1 ການຕິດຕັ້ງເຄື່ອງກິ້ງ

1. ເລືອກສະຖານທີ່: Select a sturdy, flat surface on your vehicle (e.g., winch bumper) capable of supporting the winch's weight and pulling forces.
2. ແຜ່ນຍຶດຕິດທີ່ປອດໄພ: If using a separate mounting plate, attach it securely to the vehicle frame using appropriate hardware.
3. Mount Winch: Position the winch on the mounting plate or bumper, aligning the mounting holes. Secure the winch using the provided bolts, washers, and nuts. Ensure all fasteners are tightened to the manufacturer's specifications.
4. Install Fairlead: Attach the 4-way roller fairlead to the mounting surface, ensuring the rollers are free to rotate and the cable can pass through smoothly.

4.2 ສາຍໄຟຟ້າ

Connect the winch to a 12V DC vehicle battery. Ensure the vehicle's engine is off during wiring to prevent accidental activation.

1. ກໍານົດສາຍ: The winch typically has two main power cables (red for positive, black for negative) and control wires for the solenoid/control box.
2. ເຊື່ອມຕໍ່ກ່ອງຄວບຄຸມ: Mount the control box in a secure, dry location, away from moving parts and heat sources. Connect the control box wires to the winch motor terminals as indicated in the wiring diagram (refer to specific diagram if provided with product).
3. ເຊື່ອມຕໍ່ຫາແບັດເຕີຣີ: Connect the red positive (+) cable from the control box to the positive (+) terminal of the vehicle battery. Connect the black negative (-) cable from the control box to the negative (-) terminal of the vehicle battery or a suitable chassis ground.
4. ການເຊື່ອມຕໍ່ທີ່ປອດໄພ: Ensure all electrical connections are tight and protected from corrosion and abrasion. Use dielectric grease on terminals if recommended.
5. ການ​ທໍາ​ງານ​ຂອງ​ການ​ທົດ​ສອບ​: After installation, perform a brief test of the winch's IN and OUT functions using both the wired and wireless remotes to ensure proper operation.

ຮູບທີ 4.1: Winch with control box. This image displays the winch unit along with its separate control box and associated wiring, illustrating the components involved in electrical connection.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Follow these steps for safe and effective winch operation.

5.1 Preparing for Winching

1. Vehicle Position: Position your vehicle to allow a straight pull to the anchor point. Avoid angled pulls that can damage the cable or winch.
2. Engage Clutch (if applicable): If your winch has a clutch lever, disengage it to allow the cable to free-spool.
3. Unspool Cable: Pull out enough cable to reach your anchor point. Always leave at least 5 wraps of cable on the drum to prevent the cable from detaching.
4. Secure Hook: Attach the hook securely to a tree saver strap, clevis shackle, or other appropriate recovery gear connected to your anchor point. Never hook directly to the cable or an object.
5. Dampening: ວາງຜ້າຫົ່ມຫນັກຫຼື winch ງampener over the middle of the cable. This helps absorb energy if the cable breaks.
6. ປະ​ກອບ​ການ Clutch​: Re-engage the clutch lever to lock the drum.
7. Tension Cable: Use the remote control to slowly reel in the slack until the cable is taut.

5.2 Winching Operation

1. ເຄື່ອງຈັກເລີ່ມຕົ້ນ: Start your vehicle's engine to maintain battery voltage during winching.
2. Operate Remote: Use the wireless or wired remote control to slowly reel in the cable. Press the "IN" button to pull the load.
3. ການ​ດໍາ​ເນີນ​ງານ​ຕິດ​ຕາມ​ກວດ​ກາ​: Continuously monitor the winching process, ensuring the cable spools evenly and there are no obstructions or excessive strain.
4. ການລະເບີດສັ້ນ: For heavy loads, use short, controlled pulls rather than continuous operation to prevent motor overheating. Allow the motor to cool between pulls.
5. Stop When Clear: Once the load is recovered or moved to the desired position, stop winching.

5.3 After Winching

1. ປ່ອຍຄວາມຕຶງຄຽດ: Carefully release tension on the cable.
2. ຕັດການເຊື່ອມຕໍ່: ຕັດເຊື່ອມຕໍ່ hook ຈາກຈຸດສະມໍ.
3. Respool Cable: With light tension, slowly respool the cable onto the drum. Ensure the cable spools neatly and tightly to prevent damage. Do not allow the cable to become tangled or overlap excessively.
4. Secure Hook: Secure the hook to the fairlead or a designated hook point on your vehicle.
5. ຮ້ານຄ້າໄລຍະໄກ: Store the remote control in a safe place.

ຮູບທີ 5.1: Wireless remote control in use. This image shows a Jeep equipped with the VEVOR winch, with a hand holding the wireless remote control, demonstrating its use for convenient and safe operation from a distance.

6. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and reliable performance of your winch.

• ການກວດສອບສາຍ: Regularly inspect the steel cable for kinks, frayed strands, broken wires, or corrosion. Replace damaged cables immediately.
• Clean Winch: After use, especially in muddy or wet conditions, clean the winch thoroughly with water and a mild detergent. Rinse well and allow to dry.
• ການລະບາຍສີ: Periodically lubricate moving parts such as the clutch mechanism and fairlead rollers with a suitable grease or lubricant.
• ການເຊື່ອມຕໍ່ໄຟຟ້າ: Check all electrical connections for corrosion or looseness. Clean and tighten as necessary.
• ແບັດເຕີຣີ: Ensure your vehicle battery is in good condition and fully charged, especially before winching operations.
• ການເກັບຮັກສາ: When not in use, store the winch in a dry, protected environment. If permanently mounted, ensure it is covered to protect from elements.

7. ການແກ້ໄຂບັນຫາ

If you encounter issues with your winch, refer to the following common troubleshooting steps:

If these steps do not resolve the issue, contact VEVOR customer support for further assistance.

8. ຂໍ້ມູນຈໍາເພາະ

Detailed technical specifications for the VEVOR 3000 lb Electric Winch.

ຮູບທີ 8.1: Product dimensions. This image provides key measurements of the winch unit, including length (11.8 in / 30 cm), height (4.17 in / 10.6 cm), and depth (4.07 in / 10.35 cm).