ແນະນຳ
The Streamlight TLR-9 Flex is a low-profile, rail-mounted tactical light designed for full-frame weapons. It features a powerful LED, ambidextrous rear switches, and a durable aluminum construction. This manual provides essential information for the safe and effective use of your TLR-9 Flex.
ຮູບພາບ: ດ້ານຫນ້າເປັນມຸມ view of the Streamlight TLR-9 Flex Tactical Light, showcasinການອອກແບບທີ່ກະທັດຮັດ ແລະ ຕົວຍຶດລາງລົດໄຟປະສົມປະສານ.
ຕັ້ງຄ່າ
1. ການຕິດຕັ້ງຫມໍ້ໄຟ
- Ensure the light is in the "Safe off" position by unscrewing the bezel until you feel it stop. This prevents accidental activation and conserves battery life.
- Insert two CR123A lithium batteries into the battery compartment, observing the correct polarity as indicated inside the light.
- Securely screw the bezel back into place.
ໝາຍເຫດ: Only use CR123A lithium batteries. Always dispose of used batteries responsibly.
2. Rail Mounting
The TLR-9 Flex features a rail clamp designed for rapid attachment and detachment from full-frame weapons. A key kit is included to ensure proper fitment on various rail types.
- Select the appropriate key from the included kit that matches your weapon's rail system.
- ພວນທາງລົດໄຟ clamp screw on the TLR-9 Flex.
- Align the light with the rail and slide it into position. Ensure the selected key engages with the rail slot.
- Tighten rail clamp screw firmly to secure the light. Do not overtighten.
Image: The Streamlight TLR-9 Flex Tactical Light securely mounted on the rail of a firearm, demonstrating its low-profile ການປະສົມປະສານ.
3. Switch Installation (High/Low Options)
The TLR-9 Flex comes with interchangeable high and low ambidextrous rear switches to customize the ergonomic feel based on your shooting style.
- Identify the currently installed switch type (High or Low).
- To change, carefully remove the existing switch by following the instructions provided in the detailed diagram (if available) or by gently prying it off.
- Align the desired High or Low switch with the contact points and press firmly until it clicks into place.
Image: The High Switch component, offering a more pronounced activation surface.
Image: The Low Switch component, providing a more recessed activation surface.
Image: The TLR-9 Flex with the High Switch installed, showing its extended profile.
Image: The TLR-9 Flex with the Low Switch installed, showing its more compact profile.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. ການດໍາເນີນງານພື້ນຖານ
The TLR-9 Flex features ambidextrous rear switches for momentary or constant-on operation.
- ຊ່ວງເວລານີ້: Press and hold either rear switch. The light will remain on as long as the switch is held. Release to turn off.
- ຄົງທີ່: Press and quickly release either rear switch. The light will remain on until the switch is pressed and released again.
2. Strobe Function
The TLR-9 Flex includes a user-enabled strobe function.
- To activate the strobe, rapidly press either rear switch twice (double-tap).
- To deactivate the strobe and return to constant-on mode, press and release either switch once.
The white LED produces 1,000 lumens with 10,000 candela, providing a 200-meter beam distance. Runtime is approximately 1.5 hours in constant-on mode and 3 hours in strobe mode.
ບໍາລຸງຮັກສາ
1. ການທົດແທນຫມໍ້ໄຟ
When the light output diminishes, it is time to replace the batteries. Follow the battery installation steps outlined in the Setup section.
2. ທໍາຄວາມສະອາດ
Regular cleaning will help maintain the performance and longevity of your TLR-9 Flex.
- ເຊັດດ້ານນອກຂອງແສງສະຫວ່າງດ້ວຍອ່ອນ, ງamp ຜ້າ.
- Clean the lens with a lens cleaning cloth or cotton swab to remove dirt and smudges. Avoid abrasive materials.
- Ensure the O-rings are free of debris and lightly lubricated to maintain water resistance.
3. ການເກັບຮັກສາ
When storing the TLR-9 Flex for extended periods, remove the batteries to prevent potential leakage and damage to the device.
ການແກ້ໄຂບັນຫາ
- ແສງບໍ່ເປີດ: Check battery polarity. Ensure batteries are fresh. Confirm the bezel is fully tightened (out of "Safe off" mode).
- ຜົນຜະລິດແສງສະຫວ່າງ: Replace batteries with fresh ones. Clean the lens.
- ການດໍາເນີນງານເປັນລະຫວ່າງ: ຮັບປະກັນ clamp is securely tightened. Check battery contacts for corrosion.
If issues persist, contact Streamlight customer support.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | 69464 |
| Light Output (White LED) | 1000 Lumens |
| ແຄນເດລາ | 10,000 |
| ໄລຍະຫ່າງ Beam | 200 ແມັດ |
| Runtime (Constant On) | 1.5 ຊົ່ວໂມງ |
| ເວລາແລ່ນ (Strobe) | 3 ຊົ່ວໂມງ |
| ແຫຼ່ງພະລັງງານ | 2 x CR123A Lithium Batteries (included) |
| ວັດສະດຸ | 6000 Series Machined Aircraft Aluminum |
| ຈົບ | ສີດໍາ Anodized |
| ຂະໜາດ (L x W x H) | 3.87" x 1.18" x 1.27" (9.82 cm x 2.98 cm x 3.22 cm) |
| ນ້ໍາຫນັກລາຍການ | 4.3 ອອນສ໌ (121.9 ກຣາມ) |
| ລະດັບຄວາມຕ້ານທານນ້ໍາ | ກັນນ້ຳ |
| ອົງປະກອບລວມ | Light, Key Kit, High Switch (Mounted), Low Switch, Batteries |
Image: A diagram illustrating the key dimensions and performance specifications of the Streamlight TLR-9 Flex Tactical Light.
ຂໍ້ມູນການຮັບປະກັນ
The Streamlight TLR-9 Flex is covered by a ການຮັບປະກັນຕະຫຼອດຊີວິດທີ່ຈໍາກັດ. For specific terms and conditions, please refer to the official Streamlight warranty documentation or their webເວັບໄຊ.
ສະຫນັບສະຫນູນ
For technical assistance, replacement parts, or warranty claims, please contact Streamlight customer service directly. Visit the official Streamlight webສະຖານທີ່ສໍາລັບຂໍ້ມູນຕິດຕໍ່ແລະຊັບພະຍາກອນເພີ່ມເຕີມ.
