LLURIA-lgoo

LLURIA TN18-27-7 Tatun 18W/m Vertical Flexion

LLURIA-TN18-27-7-Tatun-18W-m-Vertical-Flexion-product

Specifications

  • Model: TN18
  • Power: 18W/m
  • Lumens: 1476-1584 lumens/m
  • Color Temperature: 2700K-3000K
  • Voltage: 24V
  • LED Type: 2835
  • LEDs/m: 42
  • CRI: >90
  • IP Rating: IP67
  • Dimmable: Yes
  • Length: Customizable every 152mm, strip length 10m
  • Operating Temperature: 3°C
  • Storage Temperature: -20°C to 50°C
  • Lifespan: 50,000 hours

Product Usage Instructions

Installation

  1. Ensure the surface is clean and dry before applying the LED strip.
  2. Cut the strip to the desired length at the designated cut points (every 152mm).
  3. Connect the strips in series using the provided IP67 connectors with front cable outlet.
  4. Power the LED strip with a compatible 24V power source.
  5. For longer lengths, use appropriate cable sizes as specified in the manual.

Maintenance

Regularly check for dust accumulation on the strip and clean with a soft, dry cloth. Avoid using harsh chemicals.

Dimming

To dim the LED strip, use a compatible dimmer switch that supports dimmable LEDs. Follow the dimmer’s instructions for proper usage.

FAQ

  • Q: Can the LED strip be cut to a specific length?
    • A: Yes, the LED strip can be cut to the desired length at every 152mm interval.
  • Q: Is a heatsink required for this LED strip?
    • A: No, this LED strip does not require a heatsink for operation.

Easy to install wallwasher for outdoor architectural lighting. With builtin 30°x50° elliptical optics. Available in 5m lengths, customizable every 152mm.

LLURIA-TN18-27-7-Tatun-18W-m-Vertical-Flexion-fig (1)LLURIA-TN18-27-7-Tatun-18W-m-Vertical-Flexion-fig (2).....

 

Technical data

Technical data  
Power 18W/m
 LED strip length 10m
 LED strip length A medida cada 152mm Custom every 152mm
IP 67
CRI >90
 Voltage 24V
 LED type 2835
LEDs/m 42
 Beam angle 30º x 50º
 Min. cutting lenght 167mm
 Life time 50.000h
 Ambient temperature -40~65ºC
 Storage temperature -40~85ºC
 Warranty years 3
 Dimmable Sí Yes
 Needs heatsink No
 Max. lenght 10m (1)
Connected in series  

 

LLURIA-TN18-27-7-Tatun-18W-m-Vertical-Flexion-fig (3)

LED dimensionsLLURIA-TN18-27-7-Tatun-18W-m-Vertical-Flexion-fig (4)

Connectors

111224221LLURIA-TN18-27-7-Tatun-18W-m-Vertical-Flexion-fig (5)

  • IP67 connector with front cable outlet

110224220LLURIA-TN18-27-7-Tatun-18W-m-Vertical-Flexion-fig (6)

  • IP67 end cap

AccessoriesLLURIA-TN18-27-7-Tatun-18W-m-Vertical-Flexion-fig (7)

LightingLLURIA-TN18-27-7-Tatun-18W-m-Vertical-Flexion-fig (8) LLURIA-TN18-27-7-Tatun-18W-m-Vertical-Flexion-fig (9)

Circuit diagram

Respect the maximum lengths to avoid drops voltage and variations in light intensity.LLURIA-TN18-27-7-Tatun-18W-m-Vertical-Flexion-fig (10)

Cable section

LLURIA-TN18-27-7-Tatun-18W-m-Vertical-Flexion-fig (11)

Assembly detailLLURIA-TN18-27-7-Tatun-18W-m-Vertical-Flexion-fig (12)

Life time

The life time of our LEDs is 50.000h at an ambient temperature of 23ºC and provided with a heat dissipation system. Off cycles are recommended to extend the life of the LEDs.

Warnings

  • Caution when handing cables to avoid damage to the welds.
  • Check the operation of the LED strip before placing it.
  • The voltage surges can cause damage

Documents / Resources

LLURIA TN18-27-7 Tatun 18W/m Vertical Flexion [pdf] Owner's Manual
TN18-27-7 Tatun 18Wm Vertical Flexion, TN18-27-7, Tatun 18Wm Vertical Flexion, 18Wm Vertical Flexion, Vertical Flexion, Flexion

References

Leave a comment

Your email address will not be published. Required fields are marked *