352263 Zero Gravity Immersive Audio Recliner
“
Specifications
- SKU: 352263
- Installation & Operation
- Rev 2 09/2024
Product Information
The product is a power mechanized recliner with lumbar support
and memory function. It comes with back and seat cushions, power
cord, transformer, and optional equipment like a screwdriver. The
recliner is designed for easy assembly and operation.
Product Usage Instructions
Installation
- Ensure all components are accounted for before discarding
packing materials. - Slide back receivers onto steel mechanism posts in the base of
the recliner. - Connect cables accordingly – yellow for headrest leadwires,
grey for lumbar leadwires. - Connect power transformer to the socket at the bottom of the
recliner and plug in the power cord to a grounded outlet. - Fasten the back flap to complete assembly.
Operation
Memory Function: Press and hold Memory Button
and Auto Cycle Lumbar Button for 3 seconds to set the memory
position. Press desired memory button to recall the preset
position.
Auto Cycle Lumbar Function: Press and hold the
Auto Cycle Lumbar button for 1 second to activate or deactivate the
function.
FAQ
Q: Can children operate the power mechanized equipment?
A: No, children should not play on or operate the power
mechanized equipment.
Q: What should I do before plugging in the power cord?
A: Ensure your furniture is fully assembled and in place. Plug
the power cord into a grounded outlet only to prevent shock or
damage.
“`
OWNER’S MANUAL
Installation & Operation
SKU: 352263
Rev 2 09/2024
Table of Contents
Parts List ……………………………………………………………………. 01 Installaon Guide ……………………………………………………….. 02 Funcon introducons ………………………………………………… 04 Operang Instrucons …………………………………………………. 05 Disassembly Instrucons ……………………………………………… 08 Audio System ……………………………………………………………… 09
CustoTmreoruSberlveicsehTooolltFirneeg: …1-8…4…4-6…9…6-6…8…86……………Em…ai…l: …mo…to…se…rv…ic…e@…h…hc…us…ac…orp1.0com
Parts List
All electronics and components that need to be installed are located in bags under the foundation or attached to the frame. Before discarding the packing materials, ensure that all the parts are accounted for.
CODE DESCRIPTION
A Back Cushion
PARTS LIST
B
Seat Cushion
C Power Cord
D Transformer
IMAGE
QUANTITY
(1)
(1)
(1)
(1)
OPTIONAL EQUIPMENT (NOT INCLUDED)
Screwdriver
1
One person is required to set up the foundation. It takes about 5 minutes. Detach the transformer and power cord from the back rail of the mech under the seat.
Customer Service Toll Free: 1-844-696-6886
Email: motoservice@hhcusacorp.com
–01–
Installation Guide
2
Slide inside back receivers onto the steel mechanism posts in the base of the recliner. Press both sides of the back firmly into place until the back automatically locks into track. Zip up the seat cushion and back cushion.
A
Back Receivers Steel
Mechanism Post
ZIP
UNZIP
B
3
Flip the back flap up and connect all the cables accordingly.
The headrest leadwires are yellow. The lumbar leadwires are grey.
Lumbar
Vibrator Headrest
Customer Service Toll FreCeu:s1-844-696r-v6i8ce86Toll Free: E1m-8a0i0l:-2m4o8t-o59se8r8vice@hhcusacorp.com
–02–
Installation Guide
4
Connect the power transformer to the socket at the bottom of the back of the recliner. Connect the Power Cord into the Power Transformer. Plug the power cord into a nearby outlet, still making sure it is clear of the metal base.
Power Transformer
Power Cord
1
2
3
C
D
5
Fasten the back flap to the bottom of the furniture.
DONE!
Customer Service Toll FreCeu:s1t-844-696r-v6i8ce86Toll Free: E1m-8a0i0l:-2m4o8t-o59se8r8vice@hhcusacorp.com
–03–
Funcon introducons
Caution: Read the important instructions below before operating your power mechanized equipment Do not allow children to play on or operate this power mechanized equipment
Storage
Multi Media Control Panel
Side Control
M
Cup Holder
Cup Holder
Do Not plug the power cord into a power outlet until your furniture is fully assembled and in place. Notes: 1) To help prevent shock and or damage to your product only plug the power cord into a grounded outlet. 2) Read the operating instructions carefully before operating your furniture.
Customer Service Toll Free: 1-844-696-6886
Email: motoservice@hhcusacorp.com
–04–
Operang Instrucons
SIDE CONTROL
Open
Open Memory Button
1
2
3
Open Type-C
1 Headrest
2 Lumbar Support M
3 Recline
USB
Auto Cycle Lumbar Close
Close
Mood LED Lights Button Close
How to use Memory Function Press and hold Memory Button and Auto Cycle Lumbar Button 3 seconds. The LEDs on the memory buttons will flash to indicate that the hand control is in “set” mode. Press and hold the desired memory button to set the memory position. The LEDs will stop flashing. To go to a preset memory position, press and hold the desired memory button.
How to use Auto Cycle Lumbar Function Press and hold 1 second the Auto Cycle Lumbar button to activate the Auto Cycle Lumbar function. Press and hold 1 second the Auto Cycle Lumbar button again to OFF the Auto Cycle Lumbar function.
How to Use Mood LED Lights Press the Mood LED Lights buttons to activate the Mood LED function. Press the Mood LED Lights button again to cycle color through 16 colors. Press and hold 3 seconds to close the LED lights.
Customer Service Toll Free: 1-844-696-6886
Email: motoservice@hhcusacorp.com
–05–
Operang Instrucons
Multi Media Control Panel
Light
Volume
Treble
Bass
Vibration
Adjust the Volume Adjust the Treble Adjust the Bass
Wireless Connection Headset Adjust the Intensity of Vibration
Turning On/Off the Speaker Press and hold the volume adjustment knob to turn on the speaker. Press and hold again to turn off the speaker.
Wireless Connection Pairing Mode Press and hold the wireless button (blue light flashes) to initiate pairing. The wireless device name is: Moto Media System. Once connected, the blue light stays on and you will hear a voice prompt: “Connected.” If disconnected, the blue light will turn off and you will hear a voice prompt: “Disconnected.”
Switching Broadcast Mode 1. Press the wireless button twice quickly; you will hear a voice prompt: “Broadcast mode.” When connected, the red light stays on. Press the wireless button twice quickly again, and you will hear a voice prompt: “Broadcast off,” which exits broadcast mode. 2. After the device connects via wireless connection, press the wireless button twice quickly (red light flashes) to enter broadcast mode; the blue light will turn purple. Press the wireless button twice quickly again to exit broadcast mode; the purple light will turn back to blue.
Using Broadcast Mode When a device such as a phone or TV is connected to the wireless connection of Sofa A, press the wireless button twice quickly to switch to broadcast mode (purple light stays on). Then turn on the Sofa B speaker and press the wireless button twice quickly to switch it to broadcast mode (red light stays on). Sofa A will act as the signal source, and Sofa B will sync to play the audio or video from Sofa A.
Customer Service Toll Free: 1-844-696-6886
Email: motoservice@hhcusacorp.com
–06–
Operang Instrucons
Multi Media Control Panel
Notes 1. Wireless connection search will automatically end after three minutes without connecting to any devices, and the flashing light will turn off. If you press the button during the flashing period, the search will end.
2. Wireless connection mode has higher priority than broadcast mode. In broadcast mode, if different devices connect via wireless connection to play audio or video, broadcast mode will stop. If no playback occurs for about 4 seconds, it will re-search for other broadcast signal sources.
3. If multiple sofas are connected to the same device via wireless connection, audio and video cannot be played simultaneously. The default is for the last connected sofa to play.
Example: If sofas A, B, and C are all in broadcast mode (red light stays on), press and hold the wireless button (red light flashes) to connect to sofa A (purple light stays on). Sofas B and C will sync to play audio or video from sofa A. If the same device connects to sofa B (purple light flashes), sofa B and C will play normally, and sofa A will stop working. If you then connect to sofa C (purple light stays on), sofa C will play normally, while sofas A and B will not work. A restart is needed for playback.
4. When using wireless connection to connect the main speaker sofa to a TV, there may be delays and instability. It is recommended to use a wired connection to the main speaker sofa and then use broadcast mode for wireless synchronization to other sofas.
5. Please keep the wireless connection between devices within 10 meters.
Multimedia Control Box
POWER
SPEAKERS
INPUT SPDIF
OUTPUT
AUX AUX
This is located at the bottom of the back of the recliner. AUX input, AUX output, and S/PDIF are located on the Multimedia Control Box. You can connect multiple devices by using a 3.5mm AUX cable connecting the AUX input to the audio source and then connecting another 3.5mm AUX cable from AUX output to the AUX input of the next Multimedia control box. 3.5mm AUX cable sold separately.
Customer Service Toll Free: 1-844-696-6886
Email: motoservice@hhcusacorp.com
–07–
Disassembly Instrucons
Unzip the seat cushion and back cushion, to remove the back from the base. Pull out the black tab by hand or use a screwdriver pressing outward on black tab, then lift the back from the base of the recliner to release.
Screwdriver required (not included)
UNZIP
SERIAL LABEL
Your serial number label is at the rear of the recliner, as the below picture.
Serial Label
Serial Label
FCC INSTRUCTION
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: – Reorient or relocate the receiving antenna. – Increase the distance between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
Customer Service Toll Free: 1-844-696-6886
Email: motoservice@hhcusacorp.com
–08–
Audio System
PAIRING INSTRUCTION
Before you start. Switch on the pairing function on your mobile device. Make sure your power foundation is correctly connected and is power-on.
1. Pair with Audio System: Search for the audio device named “Moto Audio” on your device and establish a connection. 2. Music Playback: Once your devices are successfully connected, you can begin playing music through the audio system
integrated into the power foundation. 3. Connection Range: Keep in mind that the effective range between the power foundation and your device is approximately 26 ft.
TROUBLESHOOTING
SYMPTOMS
No sound
Audio system cannot be paired
SOLUTIONS
The volume is on minimum. Audio system is not paired properly. Please contact the store or customer service. Restart your power foundation. Do not attempt to pair the device behind a wall. Make sure you are pairing the devices within the connection range (26 ft).
PRODUCT PROTECTED BY FOLLOWING PATENTS: Patented Articulating Power Headrest & Lumbar US Patent: 10, 736, 423
00977B
Customer Service Toll Free: 1-844-696-6886
Email: motoservice@hhcusacorp.com
–09–
Thank you for purchasing a Power Foundaon. Contact Customer Service Toll Free at 1-844-696-6886 Email: motoservice@hhcusacorp.com
Immersive Entertainment System with Sync Technology
Congratulations on your new MotoMotion Immersive Entertainment Product(s)! You can connect to your audio source in 4 ways:
Wireless (Bluetooth)
Easily connect at the press of a button.
SPDIF Digital Optical Cable
(sold separately)
3.5 mm Auxiliary Audio
Cable
(sold separately)
RCA to 3.5 mm Auxiliary Audio
Cable
(sold separately)
Though this product can be wirelessly connected to your audio source, if you would like to connect using cables, please ensure you have the necessary cables prior to your product arriving. A convenient cable kit is available for purchase at MotoMotion.
Before your product arrives, please ensure you have the necessary cables or equipment to set it up.
THIS IMMERSIVE AUDIO SETUP LITERATURE IS THE EXCLUSIVE PROPERTY OF MOTOMOTION AND IS PROTECTED UNDER RELATED COPYRIGHT LAWS AND REGULATIONS.
1
Contents
Get to Know Your Immersive Entertainment System
1
Our Patented Immersive Entertainment Components
2
Audio Source
3
Introducing Moto Sync Technology
4
Setup with Wireless (Bluetooth) Connection
7
Setup with SPDIF Digital Optical Cable(s)
9
Setup with 3.5mm Auxiliary Audio Cable(s)
11
Setup with RCA Audio Cable(s)
13
Appendix
15
Troubleshooting Guide Table
19
Get to Know Your
Immersive Entertainment System
Important: The amplifier can be in different places depending on the product. Here are some common locations:
Moto Media Amplifier
Sofa
Located behind the back flap of the middle seat.
Console Loveseat
Located inside the console, accessible from the bottom
via a zipper.
Recliner
Located inside either arm, accessible from the bottom
via a zipper.
Console
Located inside the console, accessible from the bottom
via a zipper.
1
Our Patented
Immersive Entertainment Components
Feel the sound come alive with tactile transducers!
Transducers
Full Range Speakers
Volume
Treble
Bass
Vibration
Pairing
Volume
Treble
Bass
Vibration
Subwoofer
Moto Media Amplifier Moto Media Controller
These are built into the seat and back of the recliners, syncing perfectly with the audio to boost your entertainment experience.
Bring your movies, music, or video games to life.
Our mighty subwoofer delivers the perfect punch of bass without bothering the neighbors.
The 100-watt amplifier gives you all the power you need, no matter what you’re watching or listening to.
The stylish modern controller lets you adjust volume, treble, bass, and vibration separately. It also features pairing, broadcasting, and a headphone jack.
2
Audio Source
It’s important to know each device like a TV, gaming system, or tablet connects audio to other equipment in different ways, such as Bluetooth, SPDIF Digital Optical, 3.5mm Auxiliary, or RCA outputs.
Make sure to check your audio output options on your device before delivery. Refer to following pages for different connection options.
3
Introducing
Moto Sync Technology
Experience seamless audio with Moto Sync Technology. This innovative feature wirelessly broadcasts audio signals between all MotoMotion Entertainment product(s) equipped with the technology in the closeby area, eliminating the need for cables. Enjoy a clutter-free setup and immersive sound throughout your space.
It is suggested that one piece of your Immersive Entertainment products is connected by a cable to the audio source and then connect all other Immersive Entertainment products to the cabled/connected piece by Bluetooth.
How to Identify if Your MotoMotion Immersive Entertainment Product Has Moto Sync Technology:
· Check for the Moto Sync label on your Moto Immersive Amplifier. · Refer to the owner’s manual of your product.
OOwwnneerr”ss MMaannuuaall
POWER
S NC
SPEAKERS
INPUT
SPDIF
OUTPUT
AUX AUX
4
Introducing
Moto Sync Technology
To activate or deactivate Broadcast Mode, double tap the pairing button; The system will announce “Broadcast On” or “Broadcast Off” to indicate the current status.
Volume
Treble
Bass
Vibration
Pairing
Volume
Treble
Bass
Vibration
LED Indicator Light Off Blue Light Flashing Blue Light Red Light Red Light Flashing Purple Light
Broadcast Mode Off Off Off On On On
System Status Broadcast Off / System not paired to any Bluetooth device Broadcast Off / System in Bluetooth pairing mode Broadcast Off / System is paired to a Bluetooth device Broadcast On / System not paired to any Bluetooth device Broadcast On / System in Bluetooth pairing mode Broadcast On / System is paired to a Bluetooth device
5
Introducing
MOTO Sync Technology
Diagram of Different Connections
Wireless AUX
Volume
Treble
Bass
Vibration
Volume
Treble
Bass
Vibration
Power Input
S NC
Speaker Port
Input Selection
AUX Input
SPDIF
AUX OUTPUT
Volume
Treble
Bass
Vibration
Power Input
S NC
Speaker Port
Input Selection
AUX Input
SPDIF
AUX OUTPUT
SPDIF
Volume
Treble
Bass
Vibration
Power Input
S NC
Speaker Port
Input Selection
AUX Input
SPDIF
AUX OUTPUT
Volume
Treble
Bass
Vibration
Power Input
S NC
Speaker Port
Input Selection
AUX Input
SPDIF
AUX OUTPUT
Volume
Treble
Bass
Vibration
Power Input
S NC
Speaker Port
Input Selection
AUX Input
SPDIF
AUX OUTPUT
Volume
Treble
Bass
Vibration
Power Input
S NC
Speaker Port
Input Selection
AUX Input
SPDIF
AUX OUTPUT
Volume
Treble
Bass
Vibration
Volume
Treble
Bass
Vibration
Power Input
S NC
Speaker Port
Input Selection
AUX Input
SPDIF
AUX OUTPUT
RCA-AUX
Volume
Treble
Bass
Vibration
Volume
Treble
Bass
Vibration
Power Input
S NC
Speaker Port
Input Selection
AUX Input
SPDIF
AUX OUTPUT
Power Input
S NC
Speaker Port
Input Selection
AUX Input
SPDIF
AUX OUTPUT
Volume
Treble
Bass
Vibration
Power Input
S NC
Speaker Port
Input Selection
AUX Input
SPDIF
AUX OUTPUT
Power Input
S NC
Speaker Port
Input Selection
AUX Input
SPDIF
AUX OUTPUT
Volume
Treble
Bass
Vibration
Power Input
S NC
Speaker Port
Input Selection
AUX Input
SPDIF
AUX OUTPUT
Establish connection to the audio source with one piece of furniture in one of connection options, then simply
double tap the wireless pairing button on that piece to initiate “broadcast mode”.
Next, go to each of the other pieces and only double tap the pairing button to receive the established connection.
6
Setup with
Wireless (Bluetooth) Connection
Power Input
1 SSwwiittcchh yyoouurr MMoottoo IImmmmeerrssiivveeAAmmpplliiffiieerrttoo AAUUXX mmooddee..
S NC
Speaker Port
Input Selection
AUX Input
AUXAUX SSPPDDIFIF OutpOuuttput
Volume
Treble
Bass
Vibration
Volume
Treble
Bass
Vibration
2 Locate the audio control panel on your MotoMotion entertainment product(s).
Sofa Drop Down Table
Loveseat Inside the Console
Vibration
Treble
Bass
Volum e
Treble
Bass
Vibration
or
Pairing Volume
Recliner Inside the Arm Storage
7
Volume
Treble
Bass
Vibration
Pairing
Volume
Treble
Bass
Vibration
Power Output
Speaker Port
Input
AUX
Selection INPUT Input OUTPUT
SPDIF
AUX AUX
AUX
SPDIF
Output
Power Output
Speaker Port
Input
AUX
Selection INPUT Input OUTPUT
SPDIF
AUX AUX
AUX
SPDIF
Output
Audio Source SPDIF Output
Audio Source SPDIF Output Splitter
Power Output
Speaker Port
Input
AUX
Selection INPUT Input OUTPUT
SPDIF
AUX AUX AUX
SPDIF
Output
Power Output
Speaker Port
Input
AUX
Selection INPUT Input OUTPUT
SPDIF
AUX AUX AUX
SPDIF
Output
10
Power Output
Speaker Port
Input
AUX
Selection INPUT Input OUTPUT
SPDIF
AUX AUX
AUX
SPDIF
Output
Power Output
Speaker Port
Audio Source AUX Output
Input
AUX
Selection INPUT Input OUTPUT
SPDIF
AUX AUX AUX
SPDIF
Output
*Daisy Chain: Refer to appendix on page 15
Power Output
Audio Source AUX Output
Speaker Port
Input
AUX
Selection INPUT Input OUTPUT
SPDIF
AUX AUX AUX
SPDIF
Output
Power Output
Speaker Port
Input
AUX
Selection INPUT Input OUTPUT
SPDIF
AUX AUX AUX
SPDIF
Output
12
Power Output
Speaker Port
Input
AUX
Selection INPUT Input OUTPUT
SPDIF
AUX AUX
AUX
SPDIF
Output
Power Output
Speaker Port
Audio Source RCA Output
Input
AUX
Selection INPUT Input OUTPUT
SPDIF
AUX AUX AUX
SPDIF
Output
Audio Source AUX Output
Power Output
Power Output
Speaker Port
Input
AUX
Selection INPUT Input OUTPUT
SPDIF
AUX AUX AUX
SPDIF
Output
Speaker Port
Input
AUX
Selection INPUT Input OUTPUT
SPDIF
AUX AUX AUX
SPDIF
Output
14
Troubleshooting Guide Table
PROBLEM
SOLUTION
My furniture won’t connect to my TV wirelessly. I am connected/paired to my TV but I am not getting any sound out of the furniture.
First, check your TV’s owner’s manual to confirm that it supports Bluetooth speaker connections. Ensure your furniture is powered on, not currently connected to another device, and refer to the connection guide for pairing instructions. If connected wirelessly, ensure your TV’s audio output is set correctly (Wireless Audio output for example). Additionally, use your TV remote to increase the master volume to a high level (near maximum).
I am hard wired to my furniture with either an S/PDIF Optical cable or a 3.5mm AUX cord but not getting sound. I bought multiple pieces of furniture. Only one is connected to my TV as an audio source (via Bluetooth-enabled TV, 3.5mm AUX, or S/PDIF Optical). How do I synchronize them?
A small switch on the amplifier must be set to the correct position, corresponding to the type of wired connection you are using. Refer to the connection guide to ensure the input selection switch is in the appropriate setting.
Use the “broadcast mode” feature on your furniture. To activate broadcast mode, quickly double-tap the pairing button (do not press and hold). This will allow the signal to be shared. Next, quickly double-tap the pairing button on each additional piece. Refer to the connection guide for more details and images.
16
Troubleshooting Guide Table
PROBLEM
My furniture’s audio system won’t turn on at all.
I purchased a sectional and have the console beside the recliner on the right side when I am facing the sectional. Not all of my speakers and vibration are working. How far will the Bluetooth-enabled connection reach?
SOLUTION
First, ensure all necessary power supplies are plugged into a working outlet and receiving power. Next, you must press and hold the designated power symbol. Activate it by either pressing the main volume knob on the audio control panel or the power/ volume area on the circular ring audio control (found on recliners). When placing the console beside the right-arm-facing recliner, two audio wires inside the console must first be reversed. Next, reverse the corresponding wires on the remaining pieces to ensure the male and female connectors match correctly across the rest of the pieces. Approximately 30 feet (10 meters). This range also applies to pieces using the broadcast mode feature.
I have one piece connected via optical cord and I want to daisy chain the rest with a 3.5mm AUX cord.
This is not possible. The signal cannot be transmitted simultaneously via both optical and AUX connections. You will need to either go all AUX to utilize the AUX IN/AUX OUT, or purchase an optical splitter with enough outputs for the number of connections you require.
17
Troubleshooting Guide Table
PROBLEM
SOLUTION
My furniture won’t work with my existing sound bar or surround sound system.
It is possible to synchronize the furniture with your existing setup, however, this requires purchasing additional after-market components. For example, a sound bar connected via optical cable will need to have the optical signal split, with one end going into your sound bar and the other going to your furniture. The method of integration is entirely up to you, as all systems are different. We suggest connecting the furniture as a separate system and referring to your TV’s settings (consult the owner’s manual) to switch between audio outputs.
18
Documents / Resources
 |
Living Spaces 352263 Zero Gravity Immersive Audio Recliner [pdf] Owner's Manual 352263, LS 905-4-H3PMDZG, 352263 Zero Gravity Immersive Audio Recliner, 352263, Zero Gravity Immersive Audio Recliner, Immersive Audio Recliner, Audio Recliner, Recliner |