EPD Series Open Ceiling LED Suspended
“
Specifications:
Type: Lithonia Linear
Intended Use: A suspended linear fixture
designed for open, mixed, grid, or hard surface applications.
Construction: Extruded aluminum chassis,
injection molded plastic power modules/end caps, polycarbonate
lens
Optics: Frosted polycarbonate diffuser with 13%
uplight
Product Usage Instructions:
Installation:
Lithonia Linear is designed for easy installation in various
applications. Follow these steps:
- Determine if you have an open ceiling or T-grid style
ceiling. - Order the necessary components based on the ceiling type.
- All power cords are factory installed for convenience.
- Suspension hardware is included with each luminaire.
Mounting Hardware:
Mounting hardware is included with optional replacement parts
available. Refer to the table on page 3 for details.
Warranty:
Enjoy a 5-year limited warranty on the product. For complete
warranty terms, visit: Warranty
Terms and Conditions
FAQ:
Q: What is the warranty period for this product?
A: The product comes with a 5-year limited warranty.
Q: How do I install the Lithonia Linear fixture?
A: Follow the provided installation instructions based on your
ceiling type, and use the included mounting hardware for a
hassle-free setup.
Q: Can the optics be adjusted on the fixture?
A: The fixture utilizes a frosted polycarbonate diffuser with
fixed optics to provide optimal lighting performance.
“`
Catalog Number
DIGITAL NAVIGATION
Notes
Mounting Hardware Drawing & Dimensions Tech Guide SensorSwitch Platform nLight Platform
FEATURES & SPECIFICATIONS
Type
INTENDED USE — Lithonia Linear is a suspended linear fixture designed for open, mixed, grid, or hard surface applications. The perfect blend of configurability and simplicity – Lithonia Linear is perfect for contractors, design builders, architects and specifiers for use in almost any application including open ceilings, retail, office, hospitality,
education, healthcare, and transportation.
CONSTRUCTION — Lithonia Linear is built on an extruded aluminum chassis for the perfect blend of strength,
weight, and thermal performance. The power modules/ end caps are made of injections molded plastic and lens
is constructed of polycarbonate.
OPTICS — Lithonia Linear utilizes a frosted polycarbonate diffuser which provides an optimal 13% uplight to
prevent a dark ceiling effect without reducing overall fixture efficiency.
CONTROLS –Integrated Sensor (nLight® Wired Networking):This sensor is nLight-enabled, meaning it has
the ability to communicate over an nLight network. When wired, using CAT-5 cabling, with other nLight-enabled sensors, power packs, or WallPods, an nLight control zone is created. Once linked to a Gateway, directly or via a Bridge, the zone becomes capable of remote status monitoring and control via SensorView software.
Integrated Smart Sensor (nLight Air Wireless Platform): The RES7 sensor is nLight AIR enabled, meaning it has the ability to communicate over the wireless nLight control platform. It is available with an automatic dimming photocell, and either a digital PIR or a microphonics (PDT) dual technology occupancy sensor. It pairs to other luminaires and wall switches through our mobile app, CLAIRITY+, which allows for simple sensor adjustment
Integrated Wireless Sensor (single room control): Sensor SwitchTM VPIR or VAPIR luminaire-embedded occupancy and ambient light sensor allows the luminaire to power off when the space is unoccupied or when
enough ambient light is entering the space.
INSTALLATION — Lithonia Linear is designed to be extremely easy to install in multiple applications. Adjustable
mounting points and aircraft cable make it easy to order, without knowing exact layouts and mounting points ahead
of time. Just by determining if you have an open ceiling or T-grid style ceiling, you can order everything you need for a hassle-free installation. All power cords are factory installed and suspension hardware is included with each luminaire. We have taken the guesswork out of what you need for the installation.
LISTINGS — UL certified to US and Canadian safety standards. Damp location listed. IP5X Option. DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.
WARRANTY — 5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
MOUNTING HARDWARE –Mounting hardware included and optional replacement parts table on page 3.
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
Open Ceiling LED Suspended
LL
Lithonia® Linear EPD ZT DEC
EPD EZTR DEC
EPD EZCB DEC
Example: LL8 6000LM 80CRI CPD MIN10 ZT MVOLT F1/120A DNA
Series
Lumens
LL4 4′ LED Suspended LL8 8′ LED Suspended LL16 16′ LED Suspended
3000LM 4000LM 5000LM 6000LM 8000LM 10000LM 12000LM 16000LM 20000LM
3000 Lumens 4000 Lumens 5000 Lumens 6000 lumens 8000 lumens 10000 lumens 12000 lumens 16000 lumens 20000 lumens
CRI CCT
80CRI 30K 3000K 35K 3500K 40K 4000K 50K 5000K
Power Drop (See images below on page 5)
CPD Center Power Drop EPD End Power Drop
Minimum Dimming Level Dimming
MIN1 Dims to 1% MIN10 Dims to 10%
ZT Generic 0-10V integrated driver Remote driver box ZTR Generic 0-10V driver SLD Step level dimming EZTR eldoLED 0-10V remote box EZCR eldoled controls remote box Driver backpack EZTB eldoLED 0-10V backpack EZCB eldoled controls backpack
Voltage
Emergency Option
Mounting Type/Overall Suspension (See images below on page 3)
Finish
MVOLT MVOLT (120-277V) 347 347V
(Blank) IE10WCP IE10WCPHE
IE7WCPHE
GTD
no emergency option
10W Emergency backup
10W Emergency backup w/standby mode (T20)
7W Emergency back w/standby mode (T20)
Generator Transfer Device
F1/120A T-bar ceiling (universal mounting bracket) 120″ (10ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy included.
F1/240A T-bar ceiling (universal mounting bracket) 240″ (20ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy included.
F2/120A Hard Ceiling (horizontal J-box) 120″ (10ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy included.
F2/240A Hard ceiling (horizontal J-box) 240″ (20ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy included.
F3/120A Open Ceiling (closed loop) 120″ (10ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy not included.
F3/240A Open Ceiling (closed loop) 240″ (20ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy not included.
WH Matte White, fixture finish and cord set
DNA Natural Aluminum, fixture finish and white cord set
MB Matte Black, fixture finish and cord set
NOTE: Indicates option chosen has ordering restrictions or note. Please reference ordering notes chart. Options are sorted alphanumerically.
COMMERCIAL INDOOR
LITHONIA LINEAR
LL LED Suspended
Controls
Control Input (blank) No Control Input
NLTAIR2 NLTAIREM2
nLight AIR Generation 2 (wireless) enabled
nLight AIR Generation 2 (wireless) enabled and UL924 Emergency Operation, via power interupt detection
NLIGHT NLIGHTER NLIGHTLM NLIGHTERLM
nLight enabled
nLight enabled, for use with generator supply EM power
nLight enabled with lumen management
nLight enabled with lumen management, for use with generator supply EM power
SSE Sensor Switch Embedded
SSAIR Wireless standalone embedded control by SensorSwitch.
Sensor (blank) No Sensor or Control Input function only, if selected.
(blank) APIR APDT APIREM
APDTEM
No sensor, Control Input function only
Passive Infrared Occ sensor with auto-dimming photocell
Occ sensor dual tech (passive infared & michrophonics) and auto dimming photocell
Occ sensing with passive infared – on/off functionality and auto dimming photocell and UL924 Emergency Operation, via power interrupt detection
Occ sensor dual tech (passive infared & microphonics) and auto dimming photocell and UL924 Emergency Operation, via power interrupt detection.
(blank) PIR PDT APIR APDT VPIR
No sensor, Control Input function only Occ sensing with passive infared – on/off functionality Occ sensor dual tech (passive infared & michrophonics) Passive Infrared Occ sensor with auto-dimming photocell Occ sensor dual tech (passive infared & michrophonics) and auto dimming photocell Vertex passive Infrared OCC sensor with on/off photocell
APIR Passive Infrared Occ sensor with auto-dimming photocell APDT Occ sensor dual tech (passive infared & michrophonics) and auto dimming photocell VPIR Vertex passive Infrared OCC sensor with on/off photocell VAPIR Vertex passive Infrared Occ sensor with auto-dimming photocell
(blank) No sensor, Control Input function only VAPIR Vertex passive Infrared Occ sensor with auto-dimming photocell
End Cap Options (When ordering EPD. See page 5 with configuration examples. Aesthetic pieces only)
Options
(Blank) Center Power Drop DEC Decorative End Cap DEM Decorative End Module
IP5X Gasketing to meet IP5X rating
NLG
No Lithonia Logo
NOTE: Indicates option chosen has ordering restrictions or note. Please reference ordering notes chart. Options are sorted alphanumerically.
Option value LL16 Lumens CPD, EPD MIN1 ZT ZTR SLD EZCR EZTB, EZCB 347 IE10WCP, IE10WCPHE, IE7WCPHE GTD Mounting Type/ Overall Suspension Finish NLTAIR2 NLTAIREM2 NLIGHT, NLIGHTER, NLIGHTLM, NLIGHTLMER SSAIR IP5X
Ordering Notes/ Restrictions Restriction LL16 EPD ordered with controls must be EZCR. LL16 CPD ordered with NLTAIR, SSE/SSAIR can be ordered with EZCB and EZCR. If ordering NLIGHT, NLIGHTER, NLIGHTLM, NLIGHTERLM must be EZCR. Nominal lumen output. CPD comes with (DEC) decorative end caps. CPD is not available in LL4. EPD ships with choice of decorative end caps (DEC) or decorative module (DEM). LL16 EPD ships with decorative module (DEM). Only available with nLight, nLight Air and EldoLED. Not available with MIN1, Controls or EM, 347V. Generic driver available with with 347V, EM or GTD. Not available with MIN1 and controls Only available with remote box driver. Not available with controls, 347V or MIN1. When ordering EZCR luminaire, two cords will run from the remote driver box to the power module on the fixture. Not available with EM or 347V. EZTB not available with any Control options. Must be remote driver box mounted. Not available with Emergency, GTD or ZT, EZTB, EZCB. Not available with 347. Must be remote mounted EZTR, EZCR, ZTR. Not available with ZT. All mounting/suspension cable and hardware included. Refer to the Mounting/Suspension Hardware Included Key on page 3 for the number of suspension drops and power feed(s). Metal components painted after fabrication. Can be used as a normal power sensing device for nLight AIR devices and luminaires with EM emergency options. EZCR or EZCB must be chosen. Not available with MIN10. See UL924 Sequence of Operation. Leave Sensor option group blank, not available with APIR, APDT, APIREM and APDTEM. EZCR or EZCB must be chosen. Not available with MIN10. Must be remote box mounted EZCR. Not available with MIN10. Only available with EZCR and EZCB. Gasketing for the driver enclosure to meet IP5X. Only available with ZT.
COMMERCIAL INDOOR: 1 ACUITY WAY, DECATUR, GA 30035 Phone: 1-800-705-7378 (SERV) www.lithonia.com
LITHONIA LINEAR © 2020-2025 Acuity Brands Lighting, Inc. All rights reserved. Rev. 07/03/25
LL LED Suspended
WHAT’S IN THE BOX:
ZAC
LLAC F1 T-GRID ceiling mount
LL4 EPD
1ZAC + 1ZACFP + 2 T GRID CLIPS
LL8 CPD
2ZAC + 1ZACFP + 3 T GRID CLIPS
LL8 EPD
1ZAC + 1ZACFP + 2 T GRID CLIPS
LL16 CPD
2ZAC + 1ZACFP + 3 T GRID CLIPS
LL16 EPD
CAABI2RLZCEARCAw+’FI2TTZHACFP + 4 T GRID CLIPS
LOOP ON
AIRCRAFT
NE END
PwER
CASBTNLOEEPE.N/INDTH
CORD (PC)
F2 Hard ceiling mount LL4 EPD LL8 CPD LL8 EPD LL16 CPD LL16CEAPNDOPY
CABLE COUPLER
+ MOUNTING/ HARDWARE BAG
ZACFPD
F3 Open ceiling mount
1ZAC + 1ZACFP 2ZAC + 1ZACFP 1ZAC + 1ZACFP
J-BX BRACKET
LL4 EPD LL8 CPD LL8 EPD
2ZAC + 1ZACFP
LL16 CPD
2ZAC + 2ZACFP
LL16 EPD
AIRCRAFT CABLE w’ITH
STNOEP EONND
CANOPY w’ITH HOLE FDR Pw’ER CORD CFODRRDCBAUNSOHPIYNG
CABLE COUPLER
Pw’ER CORD
GRIPPER
aJ HEX KEP NUT
GRIPPER
aJ HEX KEP NUT
GRIPPER
aJ HEX KEP NUT
Pw’ER CORD SJT lBGA 5 CONDUCTOR
2LLAC + 1PC 3LLAC + 1PC 2LLAC + 1PC 3LLAC + 1PC 4LLAC + 2PC
CORD BUSHING FDR FIXTURE
HARDWARE IMAGES
.35″ 5.44″
1.18″
Joiner Bracket LLCR
Note: *Included with every fixture configurations
2.42″ 3.33″
1.87″
96.5
59243.4″
3.8″
12.07″
DEM-Decorative End Module
2.29″ 3.38″
DEC- Decorative End Cap
U0776 (Tgrid Clip)
89 3.5″
64295.5″
Remote Driver Box/Emergency Battery Box
Sliding Mounting Hardware
Note: *Included with every fixture configurations
Screws for power Module Connection
Note: *Included with every fixture configurations
Remote Box Bracket
Remote Box Hanger Bracket
LITHONIA LINEAR
COMMERCIAL INDOOR: 1 ACUITY WAY, DECATUR, GA 30035 Phone: 1-800-705-7378 (SERV) www.lithonia.com
© 2020-2025 Acuity Brands Lighting, Inc. All rights reserved. Rev. 07/03/25
LL LED Suspended
OPTIONAL REPLACEMENT PARTS
CI Code
*265WLF
*265WLG
*267MEP
*267MF2
*211C82
*250E2S
SUSPENSION KIT
*217YRX *2512MC
*233RV9
*250E7S
*233RVA
DEM- DECORATIVE END MODULE
DEC- DECORATIVE END CAP
MISCELLANEOUS
*2512MJ
*266EU4 *266EUK *266EUG *286VVV *286VVX *286VVY *27253J *212NF3
Model LLAC120 LLAC240 LLCNPY WHT LLCNPY BLK ZAC120 ZAC120 MB ZAC240 ZAC240 MB
ZACFPD120
ZACFPD120 MB
ZACFPD240
ZACFPD240 MB
LLCR WH DEM LLCR MB DEM LLCR DNA DEM LLCR WH DEC LLCR DNA DEC LLCR MB DEC
RK3LLCR U0776
Description 120″ cable gripper w/nut – NO Canopy 240″ cable gripper w/nut – NO Canopy White, 5″ Canopy with 15/32″ and ½” diameter holes Black, 5″ Canopy with 15/32″ and ½” diameter holes 120″ cable gripper w/nut – INCL 5″ MATTE WHITE CANOPY & BRACKET 120″ cable gripper w/nut – INCL 5″ MATTE BLACK CANOPY & BRACKET 240″ cable gripper w/nut – INCL 5″ MATTE WHITE CANOPY & BRACKET 240″ cable gripper w/nut – INCL 5″ MATTE BLACK CANOPY & BRACKET 5-conductor power feed & 120″ cable gripper w/nut – INCL 5″ MATTE WHITE CANOPY & BRACKET 5-conductor power feed & 120″ cable gripper w/nut – INCL 5″ MATTE BLACK CANOPY & BRACKET 5-conductor power feed & 240″ cable gripper w/nut – INCL 5″ WHITE CANOPY & BRACKET 5-conductor power feed & 240″ cable gripper w/nut – INCL 5″ MATTE BLACK CANOPY & BRACKET Decorative end module, Matte White Decorative end module, Matte Black Decorative end module, Natural Aluminum Decorative end cap, Matte White Decorative end cap, Natural Aluminum Decorative end cap, Matte Black Joiner, Galvanized Steel (comes std w/fixture) Clip used to convert aircraft mounting from JBOX to T-Grid
DIMENSIONS:
COMMERCIAL INDOOR: 1 ACUITY WAY, DECATUR, GA 30035 Phone: 1-800-705-7378 (SERV) www.lithonia.com
PERFORMANCE DATA
Nomenclature
Lumens Wattage LPW
LL4 3000LM 80CRI 40K MVOLT 3000
26
117
LL4 4000LM 80CRI 40K MVOLT
4045
33
123
LL4 5000LM 80CRI 40K MVOLT
4955
41
120
LL8 6000LM 80CRI 40K MVOLT 6111
50
121
LL8 8000LM 80CRI 40K MVOLT
8327
66
127
LL8 10000LM 80CRI 40K MVOLT
9786
79
124
LL16 12000LM 80CRI 40K MVOLT
12223
101
121
LL16 16000LM 80CRI 40K MVOLT
16655
131
127
LL16 20000LM 80CRI 40K MVOLT 19572
158
124
For 30K – Factor in 5% lumen reduction For 35K – Factor in 3% lumen reduction For 50K – Factor in 2% lumen increase For 347V – Factor in 12% wattage increase Refer to LL4 data upload
Projected LED Life L90 L80 L70
Hours
44K
92K
150K
Values are projections based on TM-21 and at 25C Ambient.
PALLET DIMENSIONS
Length/ configuration
4ft 8ft CPD 8ft EPD 16ft CPD, EPD
Fixtures per pallet
84 42 56 56
Pallet Dims (L X W) 50X51 51X51 50X102 50X102
FIXTURE WEIGHTS
Length 4ft 8ft 16ft
Weight 6lbs 8lbs 12lbs
LITHONIA LINEAR © 2020-2025 Acuity Brands Lighting, Inc. All rights reserved. Rev. 07/03/25
LL LED Suspended
CONFIGURATIONS:
ZT / SLD / EZTR / EZCR
LL4 EPD DEM LL4 EPD DEC
LL8 CPD LL8 EPD DEM LL8 EPD DEC
LL16 CPD LL16 EPD DEM
EZTB / EZCB
COMMERCIAL INDOOR: 1 ACUITY WAY, DECATUR, GA 30035 Phone: 1-800-705-7378 (SERV) www.lithonia.com
LITHONIA LINEAR © 2020-2025 Acuity Brands Lighting, Inc. All rights reserved. Rev. 07/03/25
LL LED Suspended
Intelligent Luminaire Technology Guide
Choose nomenclature from these columns
Control Input
Sensor
SSE
+
APIR
=
SSE
+
APDT
=
SSE
+
VPIR
=
SSE
+ VAPIR =
Sensor MSD 7 ADCX
MSD PDT 7 ADCX VERTEX EZ OCC VLP VERTEX EZ ADC VLP
SSAIR
+ (blank) =
SSAIR
+ VAPIR =
BTRM SSA BTA BTRM SSA BTA + VERTEX EZ ADC VLP
Control/ Sensor Configurations
NLIGHT NLIGHT NLIGHT NLIGHT NLIGHT NLIGHT NLIGHTER NLIGHTER NLIGHTER NLIGHTER
NLIGHTER NLIGHTER NLIGHTLM NLIGHTLM NLIGHTLM
NLIGHTLM
NLIGHTLM
NLIGHTLM NLIGHTLMER NLIGHTLMER
NLIGHTLMER
NLIGHTLMER
NLIGHTLMER
NLIGHTLMER NLTAIR2 NLTAIREM2 NLTAIR2 NLTAIR2 NLTAIR2 NLTAIR2
+ (blank) =
+
PIR
=
+
PDT
=
+
APIR
=
+
APDT
=
+
VPIR
+ (blank) =
+
PIR
=
+
PDT
=
+
APIR
=
+
APDT
=
+
VPIR
+ (blank) =
+
PIR
=
+
PDT
=
+
APIR
=
+
APDT
=
+
VPIR
+ (blank) =
+
PIR
=
+
PDT
=
+
APIR
=
+
APDT
=
+
VPIR
+ (blank) =
+ (blank) =
+
APIR
=
+ APDT =
+ APIREM =
+ APDTEM =
nIO EZ PH nIO EZ PH + nES 7 nIO EZ PH + nES PDT 7 nIO EZ PH + nES 7 ADCX nIO EZ PH + nES PDT 7 ADCX NIO EZ PH + VERTEX EZ OCC VLP
nIO EZ PH ER nIO EZ PH ER + nES 7 nIO EZ PH ER + nES PDT 7 nIO EZ PH ER + nES 7 ADCX
nIO EZ PH ER + nES PDT 7 ADCX nIO EZ PH ER + VERTEX EZ OCC VLP
nIO EZ PH N80 nIO EZ PH N80 + nES 7 nIO EZ PH N80 + nES PDT 7
nIO EZ PH N80 + nES 7 ADCX
nIO EZ PH N80 + nES PDT 7 ADCX
nIO EZ PH N80+ VERTEX EZ OCC VLP nIO EZ PH ER N80
nIO EZ PH ER N80 + nES 7
nIO EZ PH ER N80 + nES PDT 7
nIO EZ PH ER N80 + nES 7 ADCX
nIO EZ PH ER N80 + nES PDT 7 ADCX
nI0 EZ PH ER N80 + VERTEX EZ OCC VLP RIO EZ PH 90D G2 RIO EZ PH ER 90D G2 RES7 G2 RES7 PDT 180D G2 RES7 EM 180D G2
RES7 PDT EM 180D G2
Notes
Individual fixture control only. PIR integral occupancy sensor with automatic dimming control photocell. Individual fixture control only. PDT integral occupancy sensor with automatic dimming control photocell.
Vertex passive Infrared OCC sensor with on/off photocell
Vertex passive Infrared Occ sensor with auto-dimming photocell
Previous Nomenclature MSD7ADCX
MSDPDT7ADCX VTX15FOCC VTX15FADC
Wireless room control with SensorSwitch AIR Wireless room control with SensorSwitch AIR
SSAIR SSAIR APIR
nLight enabled only. No onboard sensor.
nLight enabled with PIR integral occupancy sensor.
nLight enabled with dual technology occupancy control sensor.
nLight enabled with PIR integral occupancy sensor with automatic dimming photocell.
nLight enabled with dual technology occupancy controls sensor with automatic dimming photocell.
nLight enabled with Vertex passive Infrared OCC sensor with on/off photocell
Emergency nLight enabled only. No onboard sensor.
Emergency nLight enabled with PIR integral occupancy sensor.
Emergency nLight enabled with dual technology occupancy control sensor.
Emergency nLight enabled with PIR integral occupancy sensor with automatic dimming photocell. Emergency nLight enabled with dual technology occupancy controls sensor with automatic dimming photocell.
Emergency nLight enabled with Vertex passive Infrared OCC sensor with on/off photocell
nLight enabled only with 80% constant lumen managment. No onboard sensor.
nLight enabled with 80% contstant lumen managment with PIR integral occupancy sensor.
nLight enabled with 80% contstant lumen management with dual technology occupancy control sensor. nLight enabled with 80% contstant lumen management with PIR integral occupancy sensor with automatic dimming photocell. nLight enabled with 80% contstant lumen managmentwith dual technology occupancy controls sensor with automatic dimming photocell. nLight enabled with 80% constant lumen management with Vertex passive Infrared OCC sensor with on/off photocell
Emergency nLight enabled only with 80% contstant lumen managment. No onboard sensor.
Emergency nLight enabled with 80% contstant lumen managment with PIR integral occupancy sensor. Emergency nLight enabled with 80% contstant lumen management with dual technology occupancy control sensor. Emergency nLight enabled with 80% contstant lumen management with PIR integral occupancy sensor with automatic dimming photocell. Emergency nLight enabled with 80% contstant lumen management with dual technology occupancy controls sensor with automatic dimming photocell. Emergency nLight enabled with 80% constant lumen management with Vertex passive Infrared OCC sensor with on/off photocell
nLight AIR Generation 2 enabled.
nLight AIR Generation 2 enabled
nLight AIR Generation 2 enabled.
nLight AIR Generation 2 enabled.
nLight AIR Generation 2 enabled.
nLight AIR Generation 2 enabled.
NLIGHT NLIGHT NES7 NLIGHT NESPDT7 NLIGHT NES7ADCX NLIGHT NESPDT7ADCX NLIGHT NVTX16FOCC NLIGHT EMG NLIGHT EMG NESPDT7 NLIGHT EMG NES7ADC NLIGHT EMG NES7ADCX
NLIGHT EMG NESPDT7ADCX NLIGHT NVTX15FOCC NLIGHT CL80 NLIGHT CL80 NES7 NLIGHT CL80 NESPDT7
NLIGHT CL80 NES7ADCX
NLIGHT CL80 NESPDT7ADCX
NLIGHT CL80 NVTX16FOCC NLIGHT EMG CL80 NLIGHT EMG CL80 NES7
NLIGHT EMG CL80 NESPDT7
NLIGHT EMG CL80 NES7ADCX
NLIGHT EMG CL80 NESPDT7ADCX
NLIGHT EMG CL80 NVTX15FOCC NLTAIR2 RIO NLTAIR2 RIOEM NLTAIR2 RES7 NLTAIR2 RES7PDT NLTAIR2 RES7EM NLTAIR2 RES7PDTEM
COMMERCIAL INDOOR: 1 ACUITY WAY, DECATUR, GA 30035 Phone: 1-800-705-7378 (SERV) www.lithonia.com
LITHONIA LINEAR © 2020-2025 Acuity Brands Lighting, Inc. All rights reserved. Rev. 07/03/25
LL LED Suspended
Performance You Can Count On
SensorSwitchTM offers standalone wired and wireless lighting controls solutions designed for room-based applications. Our products offer reliable performance and ease of installation.
Sensorswitch.com
Wired Embedded Controls
Wireless Embedded Controls
LL Series
1. Install the luminaires with embedde controls
2. Install and wire the wall switch to power. 3. Connect load and 0-10 dimming wires
from the wall switch to the luminaires.
SensorSwitch WSXA D
LL Series
1. Install the luminaires with embedde controls
2. Insert the pairing tool into the pinhole on the wall switch; press and hold any button for 6 seconds.
3. Once paired, each fixture will individually dim down to 10% brightness. All products will be fully functional.
SensorSwitch WSXA SSA
COMMERCIAL INDOOR: 1 ACUITY WAY, DECATUR, GA 30035 Phone: 1-800-705-7378 (SERV) www.lithonia.com
LITHONIA LINEAR © 2020-2025 Acuity Brands Lighting, Inc. All rights reserved. Rev. 07/03/25
LL LED Suspended
Single Lighting Controls Platform for Indoor & Oudoor Spaces nLIGHT® is your networked lighting controls platform, for indoor and outdoor applications, providing wired or wireless options. Scaling from room to campus-wide applications, it is the
one platform that grows with your business today and tomorrow; to seamlessly address energy cost optimization, building code compliance, improved occupant comfort, and much more.
nLIGHT also interfaces with DALI®, BACnet®, DMX and additional third-party devices.
nLIGHTcontrols.com
Wired Embedded Controls
CAT-5e
Wireless Embedded Controls
1. Install the luminaires with embedded controls
2. Install the nLight Wired wall switch.
3. Connect the luminaires using standard CAT-5e cables and the controls devices will automatically discover each other and work (plug and play).
nLight nPODMA DX
1. Install the luminaires with embedded controls
2. Install the nLight AIR batterypowered wall switch
3. Use CLAIRITY + mobile app to pair the fixture with the wall switch and is desired, customize the sensor settings
nLight nPODBA 2P DX Mobile Device
COMMERCIAL INDOOR: 1 ACUITY WAY, DECATUR, GA 30035 Phone: 1-800-705-7378 (SERV) www.lithonia.com
LITHONIA LINEAR © 2020-2025 Acuity Brands Lighting, Inc. All rights reserved. Rev. 07/03/25
Documents / Resources
 |
LITHONIA LIGHTING EPD Series Open Ceiling LED Suspended [pdf] Instruction Manual EPD Series Open Ceiling LED Suspended, EPD Series, Open Ceiling LED Suspended, Ceiling LED Suspended, LED Suspended, Suspended |