LITHONIA LIGHTING EPD Series Linear Suspended Light Fixture
FEATURES & SPECIFICATIONS
- INTENDED USE — Lithonia Linear is a suspended linear fixture designed for open, mixed, grid, or hard surface applications. The perfect blend of configurability and simplicity – Lithonia Linear is perfect for contractors, design builders, architects and specifiers for use in almost any application, including open ceilings, retail, office, hospitality, education, healthcare, and transportation.
- CONSTRUCTION — Lithonia Linear is built on an extruded aluminum chassis for the perfect blend of strength, weight, and thermal performance. The power modules/ end caps are made of injection-molded plastic and the lens is constructed of polycarbonate.
- OPTICS — Lithonia Linear utilizes a frosted polycarbonate diffuser, which provides an optimal 13% up light to prevent a dark ceiling effect without reducing overall fixture efficiency.
- CONTROLS —Integrated Sensor (nLight® Wired Networking): This sensor is nLight-enabled, meaning it has the ability to communicate over an nLight network. When wired, using CAT-5 cabling, with other nLight-enabled sensors, power packs, or WallPods, an nLight control zone is created. Once linked to a Gateway, directly or via a Bridge, the zone becomes capable of remote status monitoring and control via SensorView software.
- Integrated Smart Sensor (nLight Air Wireless Platform): The RES7 sensor is nLight AIR enabled, meaning it has the ability to communicate over the wireless nLight control platform. It is available with an automatic dimming photocell, and either a digital PIR or a microphonics (PDT) dual technology occupancy sensor. It pairs to other luminaires and wall switches through our mobile app, CLAIRITY+, which allows for simple sensor adjustment Integrated Wireless Sensor (single room control): Sensor Switch™ VPIR15 or VAPIR15 luminaire embedded occupancy and ambient light sensor allows the luminaire to power off when the space is unoccupied or when enough ambient light is entering the space.
INSTALLATION
Lithonia Linear is designed to be extremely easy to install in multiple applications. Adjustable mounting points and aircraft cable make it easy to order, without knowing the exact layouts and mounting points ahead of time. Just by determining if you have an open ceiling or T-grid style ceiling, you can order everything you need for a hassle-free installation. All power cords are factory-installed, and suspension hardware is included with each luminaire. We have taken the guesswork out of what you need for the installation.
LISTINGS — UL certified to US and Canadian safety standards. Damp location listed. IP5X Option. DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.
WARRANTY
5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions
Note: Actual performance may differ as a result of the end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice.
MOUNTING HARDWARE
Mounting hardware included and an optional replacement parts table on page 3.
Example: LL8 6000LM 80CRI CPD MIN10 ZT MVOLT F1/120A DNA
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
| Series | Lumens |
CRI | CCT | Power Drop (See images below on page 5) | Minimum Dimming Level | Dimming | |
| LL4 4′ LED Suspended | 3000LM 3000 Lumens 4000LM 4000 Lumens 5000LM 5000 Lumens | 80CRI | 30K 3000K35K 3500K40K 4000K50K 5000K | CPD Center Power Drop EPD End Power Drop |
MIN1 Dims to 1% ‡MIN10 Dims to 10% | ZT Generic 0-10V integrated driver ‡ | |
| Remote driver box ZTR Generic 0-10V driver ‡ SLD Step level dimming ‡ EZTR eldoLED 0-10V remote box EZCR eldoLED controls remote box |
|||||||
| LL8 8′ LED Suspended | 6000LM 6000 lumens 8000 LM 8000 lumens 10000 LM 10000 lumens | ||||||
| LL16 16′ LED Suspended |
12000LM 12000 lumens 16000 LM 16000 lumens 20000 LM 20000 lumens | Driver backpack EZTB eldoLED 0-10V backpackEZCB eldoLED controls backpack |
| Voltage | Emergency Option | Mounting Type/Overall Suspension ‡ (See images below on page 3) | Finish ‡ |
| MVOLT MVOLT (120-277V) 347 347V ‡ | (Blank) no emergency option IE10WCP 10W Emergency backup ‡IE10WCPHE 10W Emergency backup w/standby mode (T20) ‡IE7WCPHE 7W Emergency back w/standby mode (T20) ‡GTD Generator Transfer Device ‡ | F1/120A T-bar ceiling (universal mounting bracket) 120″ (10ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy included.F1/240A T-bar ceiling (universal mounting bracket) 240″ (20ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy included.F2/120A Hard Ceiling (horizontal J-box) 120″ (10ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy included.F2/240A Hard ceiling (horizontal J-box) 240″ (20ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy included.F3/120A Open Ceiling (closed loop) 120″ (10ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy not included.F3/240A Open Ceiling (closed loop) 240″ (20ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy not included. | WH Matte White, fixture finish and cord set DNA Natural Aluminum, fixture finish and white cord set MB Matte Black, fixture finish and cord set |
NOTE: ‡ Indicates option chosen has ordering restrictions or note.
Please reference the ordering notes chart. Options are sorted alphabetically.
| Controls | ||
| Control Input(blank) No Control Input | Sensor(blank) | No Sensor or Control Input function only, if selected. |
| NLTAIR2 nLight AIR Generation 2 (wireless) enabled | (blank) | No sensor, Control Input function only |
| NLTAIREM2 nLight AIR Generation 2 (wireless) enabled and UL924 Emergency Operation, via power interupt detection ‡ | APIRAPDT | Passive Infrared Occupancy sensor with auto-dimming photocell sensor dual tech (passive infrared & microphones) and auto-dimming photocell |
| APIREM | Occupancy sensing with passive infrared – on/off functionality and auto-dimming photocell and UL924 Emergency Operation, via power interrupt detection | |
| APDTEM | Occ sensor dual tech (passive infared & microphonics) and auto dimming photocell and UL924 Emergency Operation, via power interrupt detection. | |
| NLIGHT nLight enabled, for use with generator supply EM power. NLIGHT LM nLight enabled with lumen management, NLIGHT ERLM nLight enabled with lumen management, for use with generator supply EM power | (blank) No sensor, Control Input function only PIR Occ sensing with passive infrared – on/off functionality PDT Occ sensor dual tech (passive infrared & microphones) APIR Passive Infrared Occupancy sensor with auto-dimming photocell APDT Occ sensor dual tech (passive infrared & microwaves) and auto dimming photocell VPIR15 Vertex low-profile on/off occupancy PIR occupancy sensor at 15ft mounting height |
|
| SSE Sensor Switch Embedded | APIR APDT VPIR15 VAPIR15 | Passive Infrared Occupancy sensor with auto-dimming photocell Occ sensor dual tech (passive infrared & microwaves) and auto dimming photocell, Vertex low-profile on/off occupancy PIR occupancy sensor at 15ft mounting height Vertex low-profile on/off occupancy sensor with auto-dimming photocell at 15ft mounting height |
| SSAIR Wireless standalone embedded control by SensorSwitch. ‡ | (blank) APIR | No sensor, Control Input function only Passive Infrared Occupancy sensor with auto-dimming photocell |
| End Cap Options(When ordering EPD. See page 5 with configuration examples. Aesthetic pieces only) | Options |
| (Blank) Center Power Drop DEC Decorative End Cap DEM Decorative End Module |
IP5X Gasketing to meet IP5X rating ‡ NLG No Lithonia Logo |
| ‡ Ordering Notes/ Restrictions | |
| Option value | Restriction |
| LL16 | LL16 EPD ordered with controls must be EZCR. LL16 CPD ordered with NLTAIR, SSE/SSAIR can be ordered with EZCB and EZCR. If ordering NLIGHT, NLIGHTER, NLIGHTLM, or NLIGHTERLM must be EZCR. |
| Lumens | Nominal lumen output. |
| CPD, EPD | CPD comes with (DEC) decorative end caps. CPD is not available in LL4. EPD ships with a choice of decorative end caps (DEC) or decorative module (DEM). LL16 EPD ships with a decorative module (DEM). |
| MIN1 | Only available with nLight, nLight Air and EldoLED. |
| ZT | Not available with MIN1, Controls or EM, 347V. |
| ZTR | Generic driver available with 347V, EM or GTD. Not available with MIN1 and controls |
| SLD | Only available with remote box driver. Not available with controls, 347V or MIN1. |
| EZCR | When ordering EZCR luminaire, two cords will run from the remote driver box to the power module on the fixture. |
| EZTB, EZCB | Not available with EM or 347V. EZTB not available with any Control options. |
| 347 | Must be remote driver box mounted. Not available with Emergency, GTD or ZT, EZTB, EZCB. |
| IE10WCP, IE10WCPHE, IE7WCPHE GTD | Not available with 347. Must be remotely mounted – EZTR, EZCR, ZTR. Not available with ZT. |
| Mounting Type/ Overall Suspension | All mounting/suspension cable and hardware included. Refer to the Mounting/Suspension Hardware Included Key on page 3 for the number of suspension drops and power feed(s). |
| Finish | Metal components painted after fabrication. |
| NLTAIR2 | Can be used as a normal power sensing device for nLight AIR devices and luminaires with EM emergency options. EZCR or EZCB must be chosen. |
| NLTAIREM2 | See UL924 Sequence of Operation. Leave Sensor option group blank, not available with APIR, APDT, APIREM and APDTEM. EZCR or EZCB must be chosen. |
| NLIGHT, NLIGHTER, NLIGHTLM, NLIGHTLMER | Must be remote box-mounted EZCR. |
| SSAIR | Only available with EZCR and EZCB. |
| IP5X | Gasketing for the driver enclosure to meet IP5X. Only available with ZT. |
WHAT’S IN THE BOX
+ MOUNTING/ HARDWARE BAG
| F1 – T-GRID ceiling mount | |
| LL4 EPD | 1ZAC + 1ZACFP + 2 T GRID CLIPS |
| LL8 CPD | 2ZAC + 1ZACFP + 3 T GRID CLIPS |
| LL8 EPD | 1ZAC + 1ZACFP + 2 T GRID CLIPS |
| LL16 CPD | 2ZAC + 1ZACFP + 3 T GRID CLIPS |
| LL16 EPD | 2ZAC + 2ZACFP + 4 T GRID CLIPS |
| F2 – Hard ceiling mount | |
| LL4 EPD | 1ZAC + 1ZACFP |
| LL8 CPD | 2ZAC + 1ZACFP |
| LL8 EPD | 1ZAC + 1ZACFP |
| LL16 CPD | 2ZAC + 1ZACFP |
| LL16 EPD | 2ZAC + 2ZACFP |
| F3 – Open ceiling mount | |
| LL4 EPD | 2LLAC + 1PC |
| LL8 CPD | 3LLAC + 1PC |
| LL8 EPD | 2LLAC + 1PC |
| LL16 CPD | 3LLAC + 1PC |
| LL16 EPD | 4LLAC + 2PC |
HARDWARE IMAGES
| OPTIONAL REPLACEMENT PARTS | |||
| SUSPENSION KIT | CI Code | Model | Description |
| *265WLF | LLAC120 | 120″ cable gripper w/nut – NO Canopy | |
| *265WLG | LLAC240 | 240″ cable gripper w/nut – NO Canopy | |
| *267MEP | LLCNPY WHT | White, 5″ Canopy with 15/32″ and ½” diameter holes | |
| *267MF2 | LLCNPY BLK | Black, 5″ Canopy with 15/32″ and ½” diameter holes | |
| *211C82 | ZAC120 | 120″ cable gripper w/nut – INCL 5″ MATTE WHITE CANOPY & BRACKET | |
| *250E2S | ZAC120 MB | 120″ cable gripper w/nut – INCL 5″ MATTE BLACK CANOPY & BRACKET | |
| *217YRX | ZAC240 | 240″ cable gripper w/nut – INCL 5″ MATTE WHITE CANOPY & BRACKET | |
| *2512MC | ZAC240 MB | 240″ cable gripper w/nut – INCL 5″ MATTE BLACK CANOPY & BRACKET | |
| *233RV9 | ZACFPD120 | 5-conductor power feed & 120″ cable gripper w/nut – INCL 5″ MATTE WHITE CANOPY & BRACKET | |
| *250E7S | ZACFPD120 MB | 5-conductor power feed & 120″ cable gripper w/nut – INCL 5″ MATTE BLACK CANOPY & BRACKET | |
| *233RVA | ZACFPD240 | 5-conductor power feed & 240″ cable gripper w/nut – INCL 5″ WHITE CANOPY & BRACKET | |
| *2512MJ | ZACFPD240 MB | 5-conductor power feed & 240″ cable gripper w/nut – INCL 5″ MATTE BLACK CANOPY & BRACKET | |
| DEM- DECORATIVE END MODULE | *266EU4 | LLCR WH DEM | Decorative end module, Matte White |
| *266EUK | LLCR MB DEM | Decorative end module, Matte Black | |
| *266EUG | LLCR DNA DEM | Decorative end module, Natural Aluminum | |
| DEC- DECORATIVE END CAP | *286VVV | LLCR WH DEC | Decorative end cap, Matte White |
| *286VVX | LLCR DNA DEC | Decorative end cap, Natural Aluminum | |
| *286VVY | LLCR MB DEC | Decorative end cap, Matte Black | |
| MISCELLANEOUS | *27253J | RK3LLCR | Joiner, Galvanized Steel (comes std w/fixture) |
| *212NF3 | U0776 | Clip used to convert aircraft mounting from JBOX to T-Grid | |
DIMENSIONS
PERFORMANCE DATA
| Nomenclature | Lumens | Wattage | LPW |
| LL4 3000LM 80CRI 40K MVOLT | 3000 | 26 | 117 |
| LL4 4000LM 80CRI 40K MVOLT | 4045 | 33 | 123 |
| LL4 5000LM 80CRI 40K MVOLT | 4955 | 41 | 120 |
| LL8 6000LM 80CRI 40K MVOLT | 6111 | 50 | 121 |
| LL8 8000LM 80CRI 40K MVOLT | 8327 | 66 | 127 |
| LL8 10000LM 80CRI 40K MVOLT | 9786 | 79 | 124 |
| LL16 12000LM 80CRI 40K MVOLT | 12223 | 101 | 121 |
| LL16 16000LM 80CRI 40K MVOLT | 16655 | 131 | 127 |
| LL16 20000LM 80CRI 40K MVOLT | 19572 | 158 | 124 |
| For 30K – Factor in 5% lumen reduction For 35K – Factor in 3% lumen reduction For 50K – Factor in 2% lumen increase For 347V – Factor in 12% wattage increase Refer to LL4 data upload |
|||
| Projected LED Life | L90 | L80 | L70 |
| Hours | 44K | 92K | 150K |
| Values are projections based on TM-21 and at 25C Ambient. | |||
PALLET DIMENSIONS
| Length/ configuration | Fixtures per pallet | Pallet Dims (L X W) |
| 4ft | 84 | 50X51 |
| 8ft CPD | 42 | 51X51 |
| 8ft EPD | 56 | 50X102 |
| 16ft CPD, EPD | 56 | 50X102 |
FIXTURE WEIGHTS
| Length | Weight |
| 4ft | 6lbs |
| 8ft | 8lbs |
| 16ft | 12lbs |
CONFIGURATIONS: 
Intelligent Luminaire Technology Guide
Control/ Sensor Configurations
| Sensor |
| MSD 7 ADCX |
| MSD PDT 7 ADCX |
| VERTEX 15F EZ OCC VLP |
| VERTEX 15F EZ ADC VLP |
| BTRM SSA BTA |
| BTRM SSA BTA + nES 7 ADCX |
| nIO EZ PH |
| nIO EZ PH + nES 7 |
| nIO EZ PH + nES PDT 7 |
| nIO EZ PH + nES 7 ADCX |
| nIO EZ PH + nES PDT 7 ADCX |
| NIO EZ PH + VERTEX 16FT EZ OCC VLP |
| nIO EZ PH ER |
| nIO EZ PH ER + nES 7 |
| nIO EZ PH ER + nES PDT 7 |
| nIO EZ PH ER + nES 7 ADCX |
| nIO EZ PH ER + nES PDT 7 ADCX |
| VERTEX 15F EZ OCC VLP |
| nIO EZ PH N80 |
| nIO EZ PH N80 + nES 7 |
| nIO EZ PH N80 + nES PDT 7 |
| nIO EZ PH N80 + nES 7 ADCX |
| nIO EZ PH N80 + nES PDT 7 ADCX |
| nIO EZ PH N80+ VERTEX 8F EZ OCC VLP |
| nIO EZ PH ER N80 |
| nIO EZ PH ER N80 + nES 7 |
| nIO EZ PH ER N80 + nES PDT 7 |
| nIO EZ PH ER N80 + nES 7 ADCX |
| nIO EZ PH ER N80 + nES PDT 7 ADCX |
| VERTEX 15F EZ OCC VLP |
| RIO EZ PH 90D G2 |
| RIO EZ PH ER 90D G2 |
| RES7 G2 |
| RES7 PDT 180D G2 |
| RES7 EM 180D G2 |
| RES7 PDT EM 180D G2 |
| Notes |
| Individual fixture control only. PIR integral occupancy sensor with automatic dimming control photocell. |
| Individual fixture control only. PDT integral occupancy sensor with automatic dimming control photocell. |
| Vertex low-profile on/off occupancy PIR occupancy sensor with VLP programming at 15ft mounting height. |
| Vertex low-profile on/off occupancy sensor with auto-dimming photocell with VLP programming at 15ft mounting height. |
| Wireless room control with SensorSwitch AIR |
| Wireless room control with SensorSwitch AIR |
| nLight enabled only. No onboard sensor. |
| nLight enabled with PIR integral occupancy sensor. |
| nLight enabled with dual technology occupancy control sensor. |
| nLight enabled with PIR integral occupancy sensor with automatic dimming photocell. |
| nLight enabled with dual technology occupancy controls sensor with automatic dimming photocell. |
| nLight enabled with Vertex low-profile on/off occupancy PIR occupancy sensor at 16ft mounting height. |
| Emergency nLight enabled only. No onboard sensor. |
| Emergency nLight enabled with PIR integral occupancy sensor. |
| Emergency nLight is enabled with dual technology occupancy control sensor. |
| Emergency nLight enabled with PIR integral occupancy sensor with automatic dimming photocell. |
| Emergency nLight is enabled with dual technology occupancy control sensor with an automatic dimming photocell. |
| Emergency nLight enabled with Vertex low-profile on/off occupancy PIR occupancy sensor at 15ft mounting height. |
| nLight is enabled only with 80% constant lumen management. No onboard sensor. |
| nLight is enabled with 80% constant lumen management with a PIR integral occupancy sensor. |
| nLight is enabled with 80% constant lumen management with a dual technology occupancy control sensor. |
| nLight enabled with 80% contstant lumen management with PIR integral occupancy sensor with automatic dimming photocell. |
| nLight enabled with 80% constant lumen managment with dual technology occupancy controls sensor with automatic dimming photocell. |
| nLight enabled with 80% constant lumen management with Vertex low-profile on/off occupancy PIR occupancy sensor at 16ft mounting height |
| Emergency nLight is enabled only with 80% constant lumen management. No onboard sensor. |
| Emergency nLight enabled with 80% constant lumen management with PIR integral occupancy sensor. |
| Emergency nLight is enabled with 80% constant lumen management with dual technology occupancy control sensor. |
| Emergency nLight enabled with 80% constant lumen management with PIR integral occupancy sensor with automatic dimming photocell. |
| Emergency nLight enabled with 80% constant lumen management with dual technology occupancy controls sensor with automatic dimming photocell. |
| Emergency nLight is enabled with 80% constant lumen management. Vertex low-profile on/ off occupancy PIR occupancy sensor at 15ft mounting height. |
| nLight AIR Generation 2 enabled. |
| nLight AIR Generation 2 enabled |
| nLight AIR Generation 2 enabled. |
| nLight AIR Generation 2 enabled. |
| nLight AIR Generation 2 enabled. |
| nLight AIR Generation 2 enabled. |
| Previous Nomenclature |
| MSD7ADCX |
| MSDPDT7ADCX |
| VTX15FOCC |
| VTX15FADC |
| SSAIR |
| SSAIR APIR |
| NLIGHT |
| NLIGHT NES7 |
| NLIGHT NESPDT7 |
| NLIGHT NES7ADCX |
| NLIGHT NESPDT7ADCX |
| NLIGHT NVTX16FOCC |
| NLIGHT EMG |
| NLIGHT EMG NESPDT7 |
| NLIGHT EMG NES7ADC |
| NLIGHT EMG NES7ADCX |
| NLIGHT EMG NESPDT7ADCX |
| NLIGHT NVTX15FOCC |
| NLIGHT CL80 |
| NLIGHT CL80 NES7 |
| NLIGHT CL80 NESPDT7 |
| NLIGHT CL80 NES7ADCX |
| NLIGHT CL80 NESPDT7ADCX |
| NLIGHT CL80 NVTX16FOCC |
| NLIGHT EMG CL80 |
| NLIGHT EMG CL80 NES7 |
| NLIGHT EMG CL80 NESPDT7 |
| NLIGHT EMG CL80 NES7ADCX |
| NLIGHT EMG CL80 NESPDT7ADCX |
| NLIGHT EMG CL80 NVTX15FOCC |
| NLTAIR2 RIO |
| NLTAIR2 RIOEM |
| NLTAIR2 RES7 |
| NLTAIR2 RES7PDT |
| NLTAIR2 RES7EM |
| NLTAIR2 RES7PDTEM |
Performance You Can Count On
SensorSwitch™ offers standalone wired and wireless lighting control solutions designed for room-based applications. Our products offer reliable performance and ease of installation. Sensorswitch.com
Wired Embedded Controls
LL Series
- Install the luminaires with embedded controls
- Install and wire the wall switch to power.
- Connect load and 0-10 dimming wires from the wall switch to the luminaires.
Wireless Embedded Controls 
LL Series
- Install the luminaires with embedded controls
- Insert the pairing tool into the pinhole on the wall switch; press and hold any button for 6 seconds.
- Once paired, each fixture will individually dim down to 10% brightness. All products will be fully functional.
Single Lighting Controls Platform for Indoor & Outdoor Spaces
nLIGHT® is your networked lighting controls platform for indoor and outdoor applications, providing wired or wireless options. Scaling from room to campus-wide applications, it is the one platform that grows with your business today and tomorrow, to seamlessly address energy cost optimization, building code compliance, improved occupant comfort, and much more. nLIGHT also interfaces with DALI®, BACnet®, DMX and additional third-party devices. nLIGHTcontrols.com
Wired Embedded Controls
- Install the luminaires with embedded controls
- Install the nLight Wired wall switch.
- Connect the luminaires using standard CAT-5e cables and the control devices will automatically discover each other and work (plug and play).
Wireless Embedded Controls
Install the luminaires with embedded controls- Install the nLight AIR battery-powered wall switch
- Use CLAIRITY + mobile app to pair the fixture with the wall switch and is desired, customize the sensor settings
COMMERCIAL INDOOR: One Lithonia Way Conyers, GA 30012
- Phone: 1-800-705-7378 (SERV)
- www.lithonia.com
LITHONIA LINEAR
© 2020-2025 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/08/25
FAQ
- Q: What type of applications is the Lithonia Linear suitable for?
A: The Lithonia Linear is suitable for use in open ceilings, retail spaces, offices, hospitality venues, education facilities, healthcare environments, and transportation settings. - Q: How does the frosted polycarbonate diffuser benefit the lighting?
A: The frosted polycarbonate diffuser provides an optimal 13% uplight to prevent a dark ceiling effect without reducing overall fixture efficiency.
Documents / Resources
 |
LITHONIA LIGHTING EPD Series Linear Suspended Light Fixture [pdf] Instruction Manual EPD Series Linear Suspended Light Fixture, EPD Series, Linear Suspended Light Fixture, Suspended Light Fixture, Light Fixture, Fixture |