LiPPERT Table legs Installation Guide

LiPPERT logo

Instruction Manual
Table legs

LiPPERT Table legs

Mistral

Table legs

LiPPERT Table legs - Fig 1

Installation

LiPPERT Table legs - Fig 2

Use

LiPPERT Table legs - Fig 3

Safety Warnings, Use and Maintenance

Keep these instructions for future reference.
Read the safety warnings before installing the product.
The manufacturer is not responsible for any damage caused by failure to comply with current regulations, installation, transportation, and maintenance instructions, or improper use of the product. The manufacturer declines any liability arising from improper use or incorrect assembly of the product that may cause harm to people or property.
The product must be installed according to the provided instructions. Do not modify or alter the product in any way.
Before installation, check the compatibility of the vehicle with the purchased product. If the vehicle’s anchoring surfaces are not sufficiently solid, they must be reinforced. Thoroughly clean all support and anchoring areas of the product.
Choose screws/bolts appropriate for the material and condition of the support/wall/floor. If the user does not have the necessary expertise to select the proper screws/bolts for the support/wall/floor in use, they must contact a professional to install the product or obtain mounting instructions for the specific support/wall/floor. Ensure that the product is securely fastened to the support/wall/ floor.
When the vehicle is in motion, the product must always remain closed and locked. Check that there are no possible movements of the product due to improperly tightened screws/bolts. Failure to follow these instructions may result in damage to people or property.
Comply with speed limits and traffic regulations of the country where the vehicle is being driven.
Speed must always be appropriate to traffic conditions and the transported load. Never exceed the maximum allowed weight.
Do not use the product for any purpose or in any configuration not specified in these instructions.
This product is intended for installation on vehicles. Installation, commissioning, and testing must be carried out by qualified and authorized personnel in compliance with the instructions contained in the installation and user manual. Do not install the product using makeshift or improvised methods.
Children must not play with the product. When disposing of the product as waste, ensure that any parts posing a potential danger are rendered harmless, particularly those that children might use as toys. Packaging materials must be kept out of children’s reach as they may pose hazards.
Packaging components must not be dispersed in the environment. Dispose of the packaging in accordance with regulations set by local authorities.
Always keep the product clean and in proper working condition. To clean the product, avoid using solvents that could damage its surfaces and functionality. It is recommended to use water and soap. Dry the product after cleaning. Check for any objects or  elements obstructing one or more movements of the mechanism and remove them if necessary. Replace worn or damaged parts.
Use only original spare parts. Contact qualified installers or repairers.

Warranty

The Manufacturer warrants the products for 24 months.
The warranty does not cover damage due to:
– tampering with the product and/or its components,
– use and/or installation and/or maintenance carried out in such a way being non-compliant with what is established in these instructions,
– incorrect connection of the electronic control units (in case of electrically-operated products).
In such cases, the repair will be charged. Where the warranty is applicable, the Manufacturer will decide, at their own discretion, whether to replace the product or to have it repaired, possibly including the replacement of its components.
The work under warranty will be carried out at the headquarters of the Manufacturer or one of its Service Centers, unless otherwise expressly agreed.
The shipping cost of spare parts, the costs of labor related to interventions carried out at retailers or any other cost, are excluded from the warranty, unless previously agreed upon with the Manufacturer.
Compensation for indirect damages is excluded.

LiPPERT logo

LCI Italy Srl
Via Etruria, 1 – 50026 San Casciano (FI)
www.lippertcomponents.eu
eu-service@lippertcomponents.com

LiPPERT CCD-0010130-EU Table Legs - Symbol 1

@LippertEurope

The contents of this manual are proprietary and copyright protected by Lippert.
Lippert prohibits the copying or dissemination of portions of this manual unless prior written consent from an authorized Lippert representative has been provided.
Any unauthorized use shall void any applicable warranty.
The information contained in this manual is subject to change without notice and at the sole discretion of Lippert. Revised editions are available for free download from lippert.com.
Please recycle all obsolete materials.
For all concerns or questions, please contact Lippert
Ph: 432-LIPPERT (432-547-7378) | Web: lippert.com | Email: customerservice@lci1.com

Documents / Resources

PDF thumbnailTable legs
Installation Guide · CCD-0010137-EU Table Legs, CCD-0010137-EU, Table Legs, Legs

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.