Lock Rail Retainer Kit
“
Specifications:
- Product Name: Lockrail Retainer Kit
- Model Number: II-008
- Components: Precision Hook, Spring 43062, Retainer Clip
04872 - Revision Date: 05.27.25
Product Usage Instructions:
Step 1: Disengaging the Spring
- Use the Precision Hook to disengage the actual spring.
Step 2: Removing the Spring
- Pull out the spring carefully.
Step 3: Assembling the Spring
- Assemble the spring in the retainer and snap the part in the
lock rail about 2 inches away from the latch.
Step 4: Attaching the Retainer Clip
- Push the assembled retainer clip towards the latch until it
locks in the machining holes.
Step 5: Checking Alignment
- Ensure that the retainer clip fits perfectly with the latch and
is parallel to the lock rail.
Step 6: Testing the Latch
- Test the latch to ensure proper functionality.
Step 7: Disposing of the Old Spring
- Properly dispose of the old spring as instructed.
FAQ:
Q: What should I do if I encounter difficulties during the
replacement process?
A: If you encounter any difficulties or have questions, please
contact us at 432-LIPPERT (432-547-7378) or email us at
customerservice@lci1.com for assistance.
Q: Where can I find additional resources for product
support?
A: For self-help tips, technical documents, product videos, and
training class schedules, visit lippert.com or download the
LippertNOW app.
“`
II-008
REPLACEMENT OF LOCKRAIL RETAINER KIT
WORK INSTRUCTION
Resources Required
C
A
A. Precision Hook
B. Spring 43062
C. Retainer Clip 04872
5 B /28/2 Procedure 05 NOTE: DO NOT USE THE OLD SPRING FOR REPAIR
1. With the hook, disengage the actual spring.
se 2. Pull out the spring. public relea 3. Assemble the spring in the retainer and snap the part in the lock rail about 2″ away from the latch.
Step 1
Step 2
Step 3
m 4. Push the assembled retainer clip towards the latch until it locks in the machining holes. o 5. The retainer clip fits perfectly with the latch and is parallel to the lock rail. fr 6. Test the latch
7. Dispose of the old spring
Not approved Step4
Step 5
Step 6
Step 7
As a supplier of a broad array of highly-engineered components in the recreation and transportation product markets, safety, education and customer satisfaction are our primary concerns. Should you have any questions, please do not hesitate to contact us at 432-LIPPERT (432-547-7378) or by email at customerservice@lci1.com.
Self-help tips, technical documents, product videos and a training class schedule are available at lippert.com or by downloading the LippertNOW app.
Rev: 05.27.25
Page 1
CCD-0010266
II-008
REMPLACEMENT DU LOCKRAIL KIT DE RETENUE
INSTRUCTIONS DE TRAVAIL
Resources requises
C
A
A. Crochet de précision
B. Ressort 43062
C. Butée 04872
5 B /28/2 Procédure 05 NOTE: N’UTILISEZ PAS L’ANCIEN RESSORT POUR LA RÉPARATION
1. Avec le crochet, désengager le ressort.
se 2. Retirer le ressort. public relea 3. Assembler le ressort sur la butée et l’insérer 2″ plus loin dans la rainure de la glissière à loquets.
Étape 1
Étape 2
Étape 3
m 4. Pousser la butée assemblée vers le loquet jusqu’à ce qu’elle se verrouille en place dans les usinages. o 5. La butée s’emboite parfaitement avec le loquet et est parallèle à la glissière. fr 6. Tester le loquet.
7. Jeter le ressort remplacé.
Not approved Étape4
Étape 5
Étape 6
Étape 7
En tant que fournisseur d’une large gamme de composants de haute technologie sur les marchés des produits de loisirs et de transport, la sécurité, l’éducation et la satisfaction de la clientèle sont nos principales préoccupations. Si vous avez des questions, n’hésitez pas à nous contacter au 432-LIPPERT (432-547-7378) ou par courriel à customerservice@lci1.com. Des conseils d’auto-assistance, des documents techniques, des vidéos de produits et un programme de cours de formation
sont disponibles sur lippert.com ou en téléchargeant l’application LippertNOW.
Rev: 05.27.25
Page 2
CCD-0010266
Documents / Resources
 |
LIPPERT Lock Rail Retainer Kit [pdf] Instructions II-008, CCD-0010266, Lock Rail Retainer Kit, Rail Retainer Kit, Retainer Kit |