CCD-0009602 Thin Shade Complete Window Kit
“
Specifications:
- Product Name: Stargazer Spirit XTR Acrylic Window
- Model Number: CCD-0009602
- Maximum Skylight Window Opening: 8 degrees
Product Usage Instructions:
Introduction:
Note: Images in the manual are for reference only. Actual parts
may differ.
Safety:
Read and understand all instructions before installation or
operation. Follow safety labels.
Always wear eye protection and consider other safety
equipment.
Operation:
All windows must be fully closed before travel to prevent
damage.
Skylight Open Position:
- Toggle the screen latch to access skylight window latches.
- Press latch button and swing latch to open position.
- Push up on skylight window’s handle to open the window (max 8
degrees). - Adjust inner screens for desired air flow.
Maintenance:
Refer to the maintenance section in the manual for detailed
instructions.
Notes:
Follow all guidelines provided in the manual for optimal product
performance.
FAQ:
Q: What should I do if the skylight window does not open
smoothly?
A: If the skylight window does not open smoothly, check for any
obstructions or debris in the tracks. Clean the tracks and try
opening the window again.
Q: Can I leave the skylight window partially open during
travel?
A: It is recommended to fully close all windows before travel to
prevent any potential damage to the product or property.
“`
Master Owner’s Manual
SKYLIGHTS
REV: 2/25/2025
CCD-0009602
Master Owner’s Manual The Master Owner’s Manual is intended to provide information on Lippert’s most widely used products. Products described in the Master Owner’s Manual may not be on every trailer. The trailer may also have products not included in this manual. All manual information is subject to change without notice. Revised editions will be available for free download at lci1.com/support. Manual information is considered factual until made obsolete by a revised version. Manual information may be distributed as a complete document only, unless Lippert provides explicit consent to distribute individual parts.
User’s Note: The Table of Contents is interactive. Click on the title to navigate to the first page of the manual. In the top right corner see “RETURN to TOC” that will return you to the Table of Contents.
TABLE OF CONTENTS
Stargazer Spirit XTR Acrylic Window Owner’s Manual Stargazer Nano Long Skylight Owner’s Manual Stargazer Nano Wide Skylight Owner’s Manual
Web: – https://support.lci1.com/documentation/ – Ph: 432-LIPPERT (432-547-7378) – Email: customerservice@lci1.com
REV: 02.25.2025
Page 2
CCD-0009602
Stargazer Spirit XTR Acrylic Window
OWNER’S MANUAL
TABLE OF CONTENTS
Introduction
2
Safety
2
Operation
3
Skylight Open Position
3
Skylight Closed Position
4
Maintenance
5
Notes
5
Introduction
The Stargazer Spirit XTR Acrylic Window Skylight allows ventilation and sunshine in while providing privacy. The inner screen frame options allow for different types of ventilation and guards against pests. The inner screen assembly is a combination of a flyscreen and shade for the skylight window that can be pulled across the skylight opening by hand using the two different profiles. The integrated spring shaft tensions the fabric permanently and gives optimum hold. For information on the assembly or individual components of this product, please visit: https://support.lci1.com/skylights
NOTE: Images used in this document are for reference only when assembling, installing and/or operating this product. Actual appearance of provided and/or purchased parts and assemblies may differ.
Safety
Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions, i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This manual cannot begin to plot out instructions for every possibility, but provides the general instructions, as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the provided instructions may result in death, serious personal injury, severe product and/or property damage, including voiding of the Lippert limited warranty.
The “WARNING” symbol above is a sign that a procedure has a safety risk involved and may cause death or serious personal injury if not performed safely and within the parameters set forth in this manual.
Failure to follow instructions provided in this manual may result in death, serious personal injury and/or severe product and property damage, including voiding of the component warranty.
The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury and/or product or property damage if not safely adhered to and within the parameters set forth
in this manual.
Always wear eye protection when performing service, maintenance or installation procedures. Other safety equipment to consider would be hearing protection, gloves and possibly a full face
shield, depending on the nature of the task.
Rev: 12.16.22
Page 2
CCD-0006838
Moving parts can pinch, crush or cut. Keep clear and use caution.
Operation
All windows must be fully closed prior to travel. Failure to close windows prior to travel could result in product and/or property damage.
Skylight Open Position
NOTE: DO NOT rapidly slide the profiles of the screen frame assembly. Rapidly sliding the profiles may cause damage to the screen frame or ceiling of the unit.
1. If applicable, toggle the screen latch (Fig. 1A) to slide the screens (Fig. 1B) back into the screen frame to be able to access the Stargazer Spirit Skylight’s five skylight window latches.
2. Press in on the latch button (Fig. 2A) and swing the latch (Fig. 2B) from the closed position (Fig. 2) to the open position (Fig. 3A).
NOTE: The Stargazer Spirit XTR Acrylic Window Skylight opens to a maximum of 8 degrees. DO NOT force the skylight window open any farther than it will extend.
3. Push up on the skylight window’s handle (Fig. 4A) to open the skylight window.
Fig. 1
Fig. 2
B A
B Fig. 3
B A
Fig. 4
A A
Rev: 12.16.22
Page 3
CCD-0006838
4. If desired, slide the inner screens (Fig. 5) forward or back into a comfortable position or keep the screens back in the screen frame to get the maximum air flow from the open skylight window (Fig. 6).
Fig. 5
Fig. 6
Skylight Closed Position
All windows must be fully closed prior to travel. Failure to close windows prior to travel could result in product and/or property damage.
NOTE: DO NOT rapidly slide the profiles of the screen frame assembly. Rapidly sliding the profiles may cause damage to the screen frame or ceiling of the unit.
1. If applicable, toggle the screen latch (Fig. 7A) to slide the screens (Fig. 7B) back into the screen frame to be able to access the Stargazer Spirit Skylight’s five skylight window latches.
2. Pull down on the skylight window handle (Fig. 8A) and swing all five open latches (Fig. 9A) to the closed position (Fig. 10A). The latch button (Fig. 10B) will click into place.
3. If desired, slide the inner screens (Fig. 7B) forward or back to shade the sun.
Fig. 7
Fig. 8
B A
B Fig. 9
A
A Fig. 10
Rev: 12.16.22
Page 4
A B
CCD-0006838
Maintenance
Spot clean only the frame with a damp, microfiber cloth and mild soap. For persistent stains, use Burnus acrylic/plastic cleaner (or equivalent) which is a 2-propanol (C3H8O ) based cleaning aid. It is anti-static and non-abrasive. DO NOT spray Burnus or equivalent directly on the window. Spray the cleaner on the microfiber cloth and wipe the window with the cloth.
Notes
Rev: 12.16.22
Page 5
CCD-0006838
The contents of this manual are proprietary and copyright protected by Lippert. Lippert prohibits the copying or dissemination of portions of this manual unless prior written consent from an authorized Lippert representative has been provided. Any unauthorized use shall void any applicable warranty. The information contained in this manual is subject to change without notice and at the sole discretion of Lippert.
Revised editions are available for free download from lippert.com.
Please recycle all obsolete materials.
For all concerns or questions, please contact Lippert.
Ph: 432-LIPPERT (432-547-7378) | Web: lippert.com | Email: customerservice@lci1.com
Stargazer Nano Long Skylight
OWNER’S MANUAL
TABLE OF CONTENTS
Introduction
2
Safety
2
Operation
3
Skylight Open Position
3
Skylight Closed Position
4
Maintenance
5
Notes
5
Introduction
The Stargazer Nano Long Skylight allows ventilation and sunshine in while providing privacy. The inner screen frame options allow for different types of ventilation and guards against pests. The inner screen assembly is a combination of a flyscreen and shade for windows that can be pulled across the skylight opening by hand using the two different profiles. The integrated spring shaft tensions the fabric permanently and gives optimum hold. The Stargazer Nano Long Skylight is positioned front to rear of unit or North to South and is designed for a curved interior roof. For information on the assembly or individual components of this product, please visit: https://support.lci1.com/skylights
NOTE: Images used in this document are for reference only when assembling, installing and/or operating this product. Actual appearance of provided and/or purchased parts and assemblies may differ.
Safety
Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions, i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This manual cannot begin to plot out instructions for every possibility, but provides the general instructions, as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the provided instructions may result in death, serious personal injury, severe product and/or property damage, including voiding of the Lippert limited warranty.
The “WARNING” symbol above is a sign that a procedure has a safety risk involved and may cause death or serious personal injury if not performed safely and within the parameters set forth in this manual.
Failure to follow instructions provided in this manual may result in death, serious personal injury and/or severe product and property damage, including voiding of the component warranty.
The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury and/or product or property damage if not safely adhered to and within the parameters set forth
in this manual.
Always wear eye protection when performing service, maintenance or installation procedures. Other safety equipment to consider would be hearing protection, gloves and possibly a full face
shield, depending on the nature of the task.
Rev: 12.16.22
Page 2
CCD-0006842
Operation
Moving parts can pinch, crush or cut. Keep clear and use caution.
All windows must be fully closed prior to travel. Failure to close windows prior to travel could result in product and/or property damage.
Skylight Open Position
NOTE: DO NOT rapidly slide the profiles of the screen frame assembly. Rapidly sliding the profiles may cause damage to the screen frame or ceiling of the unit.
1. If applicable, toggle the screen latch (Fig. 1A) to slide the screens (Fig. 1B) back into the screen frame to be able to access the Stargazer Nano Long Skylight’s five skylight window latches.
2. Press in on the latch button (Fig. 2A) and swing the latch (Fig. 2B) from the closed position (Fig. 2) to the open position (Fig. 3A).
NOTE: The Stargazer Nano Long Skylight opens to a maximum of 8 degrees. DO NOT force the skylight window open any farther than it will extend.
3. Push up on the skylight window’s handle (Fig. 4A) to open the skylight window.
Fig. 1
Fig. 2
B A
B Fig. 3
B A
Fig. 4
A A
Rev: 12.16.22
Page 3
CCD-0006842
4. If desired, slide the inner screens (Fig. 5B) forward or back into a comfortable position or keep the screens back in the screen frame to get the maximum air flow from the open skylight window (Fig. 6).
Fig. 5
Fig. 6
B
B
Skylight Closed Position
All windows must be fully closed prior to travel. Failure to close windows prior to travel could result in product and/or property damage.
NOTE: DO NOT rapidly slide the profiles of the screen frame assembly. Rapidly sliding the profiles may cause damage to the screen frame or ceiling of the unit.
1. If applicable, toggle the screen latch (Fig. 7A) to slide the screens (Fig. 7B) back into the screen frame to be able to access the Stargazer Nano Long Skylight’s five skylight window latches.
2. Pull down on the skylight window handle (Fig. 8A) and swing all five open latches (Fig. 9A) to the closed position (Fig. 10A). The latch button (Fig. 10B) will click into place.
3. If desired, slide the inner screens (Fig. 7B) forward or back to shade the sun.
Fig. 7
Fig. 8
B
A
B Fig. 9
A Fig. 10
A
Rev: 12.16.22
Page 4
A B
CCD-0006842
Maintenance
Spot clean only the frame with a damp, microfiber cloth and mild soap. For persistent stains, use Burnus acrylic/plastic cleaner (or equivalent) which is a 2-propanol (C3H8O ) based cleaning aid. It is anti-static and non-abrasive. DO NOT spray Burnus or equivalent directly on the window. Spray the cleaner on the microfiber cloth and wipe the window with the cloth.
Notes
Rev: 12.16.22
Page 5
CCD-0006842
The contents of this manual are proprietary and copyright protected by Lippert. Lippert prohibits the copying or dissemination of portions of this manual unless prior written consent from an authorized Lippert representative has been provided. Any unauthorized use shall void any applicable warranty. The information contained in this manual is subject to change without notice and at the sole discretion of Lippert.
Revised editions are available for free download from lippert.com.
Please recycle all obsolete materials.
For all concerns or questions, please contact Lippert.
Ph: 432-LIPPERT (432-547-7378) | Web: lippert.com | Email: customerservice@lci1.com
Stargazer Nano Wide Skylight
OWNER’S MANUAL
TABLE OF CONTENTS
Introduction
2
Safety
2
Operation
3
Skylight Open Position
3
Skylight Closed Position
4
Maintenance
5
Notes
5
Introduction
The Stargazer Nano Wide Skylight allows ventilation and sunshine in while providing privacy. The inner screen frame options allow for different types of ventilation and guards against pests. The inner screen assembly is a combination of a flyscreen and shade for windows that can be pulled across the skylight opening by hand using the two different profiles. The integrated spring shaft tensions the fabric permanently and gives optimum hold. The Stargazer Nano Wide Skylight is positioned roadside to curbside of the unit or East to West and is designed for a curved interior roof. For information on the assembly or individual components of this product, please visit: https://support.lci1.com/skylights
NOTE: Images used in this document are for reference only when assembling, installing and/or operating this product. Actual appearance of provided and/or purchased parts and assemblies may differ.
Safety
Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions, i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This manual cannot begin to plot out instructions for every possibility, but provides the general instructions, as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the provided instructions may result in death, serious personal injury, severe product and/or property damage, including voiding of the Lippert limited warranty.
The “WARNING” symbol above is a sign that a procedure has a safety risk involved and may cause death or serious personal injury if not performed safely and within the parameters set forth in this manual.
Failure to follow instructions provided in this manual may result in death, serious personal injury and/or severe product and property damage, including voiding of the component warranty.
The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury and/or product or property damage if not safely adhered to and within the parameters set forth
in this manual.
Always wear eye protection when performing service, maintenance or installation procedures. Other safety equipment to consider would be hearing protection, gloves and possibly a full face
shield, depending on the nature of the task.
Rev: 12.16.22
Page 2
CCD-0006846
Operation
Moving parts can pinch, crush or cut. Keep clear and use caution.
All windows must be fully closed prior to travel. Failure to close windows prior to travel could result in product and/or property damage.
Skylight Open Position
NOTE: DO NOT rapidly slide the profiles of the screen frame assembly. Rapidly sliding the profiles may cause damage to the screen frame or ceiling of the unit.
1. If applicable, toggle the screen latch (Fig. 1A) to slide the screens (Fig. 1B) back into the screen frame to be able to access the Stargazer Nano Wide Skylight’s five skylight window latches.
2. Press in on the latch button (Fig. 2A) and swing the latch (Fig. 2B) from the closed position (Fig. 2) to the open position (Fig. 3A).
NOTE: The Stargazer Nano Wide Skylight opens to a maximum of 13 degrees. DO NOT force the skylight window open any farther than it will extend.
3. Push up on the skylight window’s handle (Fig. 4A) to open the skylight window.
Fig. 1
Fig. 2
B
A
B Fig. 3
B A
Fig. 4
A
A
Rev: 12.16.22
Page 3
CCD-0006846
4. If desired, slide the inner screens (Fig. 5B) forward or back into a comfortable position or keep the screens back in the screen frame to get the maximum air flow from the open skylight window (Fig. 6).
Fig. 5
Fig. 6
B
A
B
Skylight Closed Position
All windows must be fully closed prior to travel. Failure to close windows prior to travel could result in product and/or property damage.
NOTE: DO NOT rapidly slide the profiles of the screen frame assembly. Rapidly sliding the profiles may cause damage to the screen frame or ceiling of the unit.
1. If applicable, toggle the screen latch (Fig. 7A) to slide the screens (Fig. 7B) back into the screen frame to be able to access the Stargazer Nano Wide Skylight’s five skylight window latches.
2. Pull down on the skylight window handle (Fig. 8A) and swing all five open latches (Fig. 9A) to the closed position (Fig. 10A). The latch button (Fig. 10B) will click into place.
3. If desired, slide the inner screens (Fig. 7B) forward or back to shade the sun.
Fig. 7
Fig. 8
B
A
B Fig. 9
A Fig. 10
A
Rev: 12.16.22
Page 4
A B
CCD-0006846
Maintenance
Spot clean only the frame with a damp, microfiber cloth and mild soap. For persistent stains, use Burnus acrylic/plastic cleaner (or equivalent) which is a 2-propanol (C3H8O ) based cleaning aid. It is anti-static and non-abrasive. DO NOT spray Burnus or equivalent directly on the window. Spray the cleaner on the microfiber cloth and wipe the window with the cloth.
Notes
Rev: 12.16.22
Page 5
CCD-0006846
The contents of this manual are proprietary and copyright protected by Lippert. Lippert prohibits the copying or dissemination of portions of this manual unless prior written consent from an authorized Lippert representative has been provided. Any unauthorized use shall void any applicable warranty. The information contained in this manual is subject to change without notice and at the sole discretion of Lippert.
Revised editions are available for free download from lippert.com.
Please recycle all obsolete materials.
For all concerns or questions, please contact Lippert.
Ph: 432-LIPPERT (432-547-7378) | Web: lippert.com | Email: customerservice@lci1.com
Documents / Resources
 |
LiPPERT CCD-0009602 Thin Shade Complete Window Kit [pdf] Owner's Manual CCD-0009602, CCD-0009602 Thin Shade Complete Window Kit, Thin Shade Complete Window Kit, Complete Window Kit, Window Kit |