KL-E2M-C Network Extra Loud Bell Clock System
“
Product Specifications
- Model: Netbell-KL Network Extra Loud Bell
Clock System - Part Numbers:
- Netbell-KL-C 01-910-00066
- Netbell-KL-M2-C 01-910-00081
- Netbell-KL-E1-C 01-910-00087
- Netbell-KL-E2M-C 01-910-00088
- Software: Bell Scheduling Software (Built-In
on web server) - Bells: Built-In Bell (6, 102dBa@1m), External
Bell Output(s) - Event Schedules: Up to 500 Web-Based Event
Schedules, User Programmable for Each Schedule - Digital Clock: 4 LED Digital Clock
- Enclosure: ABS, IP66, 150mm x 150mm x
90mm - Accessories: Power Cable, RJ45 Cable, Mounting
Brackets - Power Input: 24VAC (included)
- Sensors: Power Input Voltage Sensor,
Temperature Sensor - Backup: Rechargeable Battery for offline time
& settings keeping backup up to 7 days - Working Temperature: From 0 to +60
Celsius - Supported Protocols: HTTP, SMTP, SNTP
Product Usage Instructions
Remote Access and Bell Scheduling
To remotely access and schedule bells from a web browser:
- Connect the Netbell-KL system to power and network.
- Access the built-in web server through your web browser.
- Add event schedules and program bell ringing durations as
needed.
Bell Control and Manual Ringing
For manual bell control and ringing:
- Use the push switch on the enclosure for manual bell
ringing. - You can control external bells individually based on the
setup.
Troubleshooting and Maintenance
If you encounter any issues or need maintenance:
- Check the power and network connections.
- Monitor sensor readings for any anomalies.
- Contact Linor Technology, Inc. for technical support if
needed.
Frequently Asked Questions (FAQ)
Q: Is software installation required on my computer?
A: No, there is no software required to install on your
computer. All software is located on the built-in web server of the
Netbell-KL system.
Q: How many event schedules can be programmed?
A: The Netbell-KL system supports up to 500 web-based event
schedules that can be added from a web browser.
Q: What is the working temperature range of the system?
A: The Netbell-KL system operates within a working temperature
range from 0 to +60 Celsius.
“`
Self-Contained, Easy-To-Use, Remote Access, Scheduling Bells from Web Browser, No Software Required to Install on Your Computer
· Easy to Install: The Netbell system is low voltage system that’s designed for DIY installation, no need to hire professional installer
· Web-based control: Access, schedule, and manage your break bells from any computer on the network
· Programmable up to 500 events: Create schedules for breaks and shift changes, automated reminders from standard browser
· High-output loud bell: Up to 102dBa@1m ensures your alerts are heard even in the noisiest environments
· Flexible scheduling: Weekday or calendar-based bell scheduling giving you the flexibility of bell control
· Easy to Expand: Each Netbell is an independent system, that you can easily add more units to the existing system as your business grows.
· Designed, developed and built in the USA
· Scan the QR code to learn more:
Linortek Netbell® is a network-enabled, affordable, reliable, and easy-todeploy timed alert system. With the easy-to-use built-in web interface, you can access, control, and schedule bells, equipment, or any other timed events over the network from a web browser. No additional software or designated computer is required, eliminating the need for complex wiring and control systems. This cost-effective solution is ideal for schools, factories, warehouses, and other facilities to signal start and stop work, lunch breaks, shift changes, as well as using it as employee alarm system to satisfy the requirements of OSHA 29 CFR 1910.165 regulation.
The Netbell-KL-E2M-C is a self-contained, all-in-one extra loud bell system with a 4″ digital clock that can synchronize its time from the Netbell, the clock can be plugged to the Netbell-KL clock output directly, no configuration required. The Netbell-KL-M2 comes with a built-in 6-inch high output bell (102dB), and a web-based bell controller installed within a NEMArated box of the main unit, two external bells mounted on a weatherproof backboxes. With this 3-bell system, you can cover up to 60,000 square feet area. It’s ready to connect; you will only need to prepare 2-conductor speaker wires to connect the external bells to the Netbell-KL-M2 up to 500 feet away using 18 AWG cable. With the digital input, you can wire a push switch to ring the bells manually in an emergency.
General Information Model Part# Technical Specification
Netbell-KL Network Extra Loud Bell Clock System
Netbell-KL-C 01-910-00066
Netbell-KL-M2-C 01-910-00081
Netbell-KL-E1-C 01-910-00087
Netbell-KL-E2M-C 01-910-00088
Bell Scheduling Software
Built- In (All software located on built-in web server.)
Event Schedules Bell Ringing Duration
Built-In Bell (6″, 102dBa@1m) 4″ LED Digital Clock
Up to 500 Web-Based Event Schedules (Add schedules from web browser) User Programmable for Each Schedule
1
1
External Bell Output (s)
1
2
1
2
External Bell (s) (6″, 102dBa@1m) Coverage (SQ FT) Manual Bell Control Push Switch Enclosure Accessories Power Input Voltage Sensor Temperature Sensor Rechargeable Battery Working Temperature
Supported Protocols
0
0
1
2
20,000
20,000
40,000
60,000
Yes
Optional
ABS, IP66 /150mm x 150mm x 90mm
Power Cable/RJ45 Cable/Mounting Brackets
24VAC (included)
On Board
On Board
On Board (For offline time & settings keeping backup up to 7 days)
From 0 to +60 Celsius
HTTP/ SMTP/SNTP
Linor Technology, Inc. www.linortek.com
Address: Winston Salem, NC 27127 © Linortek, information subject to change without notice.
Documents / Resources
 |
LINORTEK KL-E2M-C Network Extra Loud Bell Clock System [pdf] Owner's Manual KL-E2M-C Network Extra Loud Bell Clock System, KL-E2M-C, Network Extra Loud Bell Clock System, Extra Loud Bell Clock System, Bell Clock System, Clock System, System |