LINORTEK 01-910-00029 Netbell Extra Loud Bell System Instructions
LINORTEK 01-910-00029 Netbell Extra Loud Bell System  

Self-Contained, Easy-To-Use, Remote Access, Scheduling Bells from Web Browser,
No Software Required to Install on Your Computer 

Linortek Netbell® is a network-enabled, affordable, reliable, and easy-todeploy timed alert system. With the easy-to-use built-in web interface, you can access, control, and schedule bells, equipment, or any other timed events over the network from a web browser. No additional software or designated computer is required, eliminating the need for complex wiring and control systems. This cost-effective solution is ideal for schools, factories, warehouses, and other facilities to signal start and stop work, lunch breaks, shift changes, as well as using it as employee alarm system to satisfy the requirements of OSHA 29 CFR 1910.165 regulation.
The Netbell-KL is a self-contained, all-in-one extra loud bell system. This easy-to-use bell system was designed for busy school administrators, factory/warehouse operations, and maintenance managers to save valuable time in setting up a break time alarm system. It comes with a built-in 6-inch high output bell (102dB) that can cover up to 20,000 square feet area, and a completely wired web-based bell controller installed within a NEMA-rated box. All software and mounting hardware required for installation and operation are included; no additional parts are needed. There is one external bell output that allows you to add one more bell (not included) as your business expands.
With the digital input, you can wire a push switch to ring the bell manually in an emergency.

The Key Features

  • Easy to Install: The Netbell system is low voltage system that’s designed for DIY installation, no need to hire professional installer
  • Web-based control: Access, schedule, and manage your break bells from any computer on the network
  • Programmable up to 500 events: Create schedules for breaks and shift changes, automated reminders from standard browser
  • High-output loud bell: Up to 102dBa@1m ensures your alerts are heard even in the noisiest environments
  • Flexible scheduling: Weekday or calendar-based bell scheduling giving you the flexibility of bell control
  • Easy to Expand: Each Netbell is an independent system, that you can easily add more units to the existing system as your business grows.
  • Designed, developed and built in the USA
  • Scan the QR code to learn more:

Netbell® Technical Specifications

Netbell-KL All-In-One Extra Loud Bell System 

General Information 

Model Netbell-KL Netbell-KL-M2 Netbell-KL-E1 Netbell-KL-E2M
Part# 01-910-00029 01-910-00043 01-910-00050 01-910-00051
Technical Specification
Bell Scheduling Software Built- In (All software located on built-in web server.)
Event Schedules Up to 500 Web-Based Event Schedules (Add schedules from web browser)
Bell Ringing Duration User Programmable for Each Schedule
Built-In Bell (6″, 102dBa@1m) 1
External Bell Output (s) 1 2 1 2
External Bell (s) (6″,102dBa@1m) 0 0 1 2
Coverage (SQ FT) 20,000 20,000 40,000 60,000
Manual Bell Control Yes
Push Switch Optional
Enclosure ABS, IP66 /150mm x 150mm x 90mm
Accessories Power Cable/RJ45 Cable/Mounting Brackets
Power Input 24VAC (included)
Voltage Sensor On Board
Temperature Sensor On Board
Rechargeable Battery On Board (For offline time & settings keeping backup up to 7 days)
Working Temperature From 0 to +60 Celsius
Supported Protocols HTTP/ SMTP/SNTP

Linor Technology, Inc.
www.linortek.comAddress: Winston Salem, NC 27127
© Linortek, information subject to change without notice.

Documents / Resources

LINORTEK 01-910-00029 Netbell Extra Loud Bell System [pdf] Instructions
01-910-00029, 01-910-00043, 01-910-00050, 01-910-00051, 01-910-00029 Netbell Extra Loud Bell System, 01-910-00029, Netbell Extra Loud Bell System, Extra Loud Bell System, Loud Bell System, Bell System, System

References

Leave a comment

Your email address will not be published. Required fields are marked *