LINOCELL 22939 iPad Keyboard and Case With Touchpad User Manual

Q: How do I pair the keyboard via Bluetooth?
A: Press and hold the Pairing button for 2 seconds to enter Bluetooth pairing mode. The Bluetooth indicator starts flashing. Open the Bluetooth settings on your smart device, look for Linocell BTK15, and connect. Pairing occurs automatically the next time you turn on the keyboard.

Overview

Specifications

Compatibility: iPad Pro 11” gen. 2-4, iPad Air 10.9” gen 4-5

Keyboard layout: Nordic
Bluetooth version: BT 5.3 (up to 10 m)

Supported OS: iPad OS
Charging time: Up to 3 h

Standby time: 100 days
Working time: Up to 80 h

Size: 249x194x16 mm (excl. iPad)
Weight: 700 g

Wireless frequency: 2402–2480 MHz
Max. radiated power: 20 mW (Max.)

Included: Keyboard case, USB-A to USB-C charging cable, manual

Use

Charging
- Connect the included USB-C cable between the keyboard’s charging port and a USB power adapter (sold separately). Connect the USB power adapter to a wall socket. The
- The battery indicator lights up red during charging and turns green when the battery is fully charged. The Battery indicator flashes red when the battery level is low.

Power on/off
- Turn the keyboard on by sliding the Power on/off switch to “ON”. Slide the switch to “OFF” to turn it off.
- Press your tablet to the Foldable magnetic holder and stand to attach it to the keyboard case.
Bluetooth pairing
- Press and hold the Pairing button for 2 seconds to enter Bluetooth pairing mode. The Bluetooth indicator starts flashing. Open the Bluetooth settings on your smart device.
- Look for “Linocell BTK15” and connect. Pairing occurs automatically the next time you turn on the keyboard.
Standby
- The keyboard enters standby mode after 10 minutes of inactivity to save battery power.
- Press any key or the touchpad to wake it.
Function keys
There are functions or shortcuts assigned to some of the other keys.
- Language and keyboard
- Backlight brightness.
  Press the right-most Option key on the keyboard along with this function button multiple times to cycle between the 3 available backlight brightness modes.

Touchpad gestures
When using the keyboard with iOS and iPad OS (14.5 and higher), extra functionality is added to the touchpad.

Gestures using one finger:

Gestures using two fingers:

Safety information

This product contains a rechargeable Li-ion battery that cannot be replaced. Do not disassemble the product.

Simplified EU Declaration of Conformity
Kjell & Company hereby declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of conformity is available at www.kjell.com/22939

Recommended power adapter
To ensure optimal and safe performance, use a CE-certified adapter with these specifications:

Minimum charging power: 0.1 Watts
Maximum charging power: 2.5 Watts (for full speed)

Only use adapters meeting these specifications to avoid performance issues or safety risks.

Symbol Description

WEEE – Waste Electrical and Electronic Equipment.
This symbol indicates that the product should not be disposed of with household waste within the EU. To protect the environment and human health from potential risks associated with improper disposal, the product should be recycled. Please take the product to an approved e-waste collection point or contact the retailer to ensure responsible handling and recycling.
This product carries the CE mark in compliance with the requirements of the Radio Equipment Directive 2014/53/EU and ROHS (2015/863/EU that updated 2011/65/EU).

Documents / Resources

LINOCELL 22939 iPad Keyboard and Case With Touchpad [pdf] User Manual
22939 iPad Keyboard and Case With Touchpad, 22939, iPad Keyboard and Case With Touchpad, Case With Touchpad, With Touchpad, Touchpad

References

User Manual

LINOCELL 22939 iPad Keyboard and Case With Touchpad

Product Usage Instructions