Linocell 22687 Keyboard Case for iPad
INSTRUCTION MANUAL
MODEL: 22687
Overview
Use
Charging
Connect the included USB-C cable between the keyboard’s charging port and a USB power adapter (sold separately). Connect the USB power adapter to a wall socket. The charging indicator lights up red during charging and turns green when the battery is fully charged. The low battery indicator flashes red when the battery level is low.
Power on/off
Turn the keyboard on by sliding the Power on/off switch to “ON”. Slide the switch to “OFF” to turn it off.
Bluetooth pairing
Press the Fn and C keys on the keyboard at the same time to enter Bluetooth pairing mode. The Bluetooth indicator starts flashing. Open the Bluetooth settings on your smart device. Look for “Linocell BTK11” and connect. Pairing occurs automatically the next time you turn on the keyboard.
Standby
The keyboard enters standby mode after 15 minutes of inactivity to save battery power.
Press any key to wake it.
Function keys
The keyboard has function keys on the top row.
There are also functions or shortcuts assigned to some of the other keys. To activate a function, press the key with the blue symbol and the Fn key (lower left) at the same time.
Below is a description of each key’s function.
Touch pad gestures
When using the keyboard with iOS and iPad OS (14.5 and higher), extra functionality is added to the touch pad.
Gestures using one finger:
Gestures using two fingers:
Safety information
This product contains a rechargeable Li-ion battery that cannot be replaced. Do not disassemble the product.
Simplified EU Declaration of Conformity
Kjell & Company hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of conformity is available at www.kjell.com/22687
Recommended power adapter
To ensure optimal and safe performance, use a CE-certified adapter with these specifications:
- Minimum charging power: 0.1 Watts
- Maximum charging power: 0.5 Watts (for full speed)
Only use adapters meeting these specifications to avoid performance issues or safety risks.
Symbol description
WEEE – Waste Electrical and Electronic Equipment.
This symbol indicates that the product should not be disposed of with household waste within the EU. To protect the environment and human health from potential risks associated with improper disposal, the product should be recycled. Please take the product to an approved e-waste collection point or contact the retailer to ensure responsible handling and recycling.
This product carries the CE mark in compliance with the requirements the Radio Equipment Directive 2014/53/EU and ROHS (2015/863/EU that updated 2011/65/EU).
Specifications
- Compatibility: iPad Pro 11” 2021, iPad Pro 11” 2020, iPad Pro 11” 2018, iPad Air 4 10.9”
- Bluetooth version: BT 5.3 (up to 10 m)
- Supported OS: iOS, iPad OS
- Charging time: 2-3 h
- Standby time: 100 days
- Working time: Up to 80 h
- Size: 256x198x22 mm
- Weight: 599 g
- Wireless frequency: 2402–2480 MHz
- Max. radiated power: 20 mW (Max.)
- Included: Keyboard case, USB-A to USB-C charging cable, manual
www.linocell.com
Box 50435, 202 14
Malmö, Sweden
2025-05-07
Frequently Asked Questions (FAQ)
1. Can the battery be replaced?
No, this product contains a rechargeable Li-ion battery that cannot be replaced. Do not disassemble the product.
Documents / Resources
 |
Linocell 22687 Keyboard Case for iPad [pdf] Instruction Manual 22687, 22687 Keyboard Case for iPad, Keyboard Case for iPad, Case for iPad |
