Linksys 100007 Velop Pinnacle 2.0 Router

Specifications

• Product Name: Pinnacle 2.0 Router
• Quantity: 1-Pack
• Part Number: 8820-0xxxx

Product Usage Instructions

Set up for Unconfigured Node to Router

1. Disconnect your old router from your modem or gateway.
2. Scan the QR code to connect to your WiFi.
3. Restart your modem or gateway by unplugging it. Wait 3 minutes and plug it back in.

Connecting the Router

1. Connect your Router to the modem using the provided Ethernet cable. Plug it into the Internet port on the Router.
2. Plug your Router into a power outlet and wait for it to start up. The Router light will blink blue and then turn solid blue once ready for setup.

Setting Up the Router

1. Save the guide for future reference. Your default WiFi Name and Password are printed on the bottom of your Router.
2. Scan the QR code or visit www.myrouter.info to set up your Router following the on-screen instructions.
3. The Router light will blink white during setup and turn solid white once setup is complete.

Specifications

• Pinnacle 2.0 QSG, 1-Pack
• Part number: 8820-0xxxx
• Revision: A00
• Accordian brochure
• Overall size: 360 x 229.5
• Material: 128gsm artwork paper + Matte AQ varnish
• Grain: Vertical
• Tolerance: +/- 0.8mm
• Drawing Scale: 1:1

CONNECTION

1. Step 1
   • Disconnect your old router from your modem or gateway.
   • Restart your modem or gateway by unplugging it.
   • Wait 3 minutes and plug it back in.
   • Connect your Router to the modem.
   • Use the provided Ethernet cable to connect the modem to the Internet port on the Router.
   • Plug your Router into a power outlet.
   • Give it a minute to start up. The Router light will blink blue as it is starting up and turn solid blue once ready for setup.
2. Step 2
   • Scan the QR code to connect to your WiFi.
   • Save this guide for future reference. Your default WiFi Name and Password are also printed on the bottom of your Router.
   • Scan the QR code to set up your Router.
   • Follow the on-screen instructions.
   • Visit www.myrouter.info
   • Personalise your WiFi Name
   • Enable Guest WiFi
   • The Router light will blink white as it is being set up and turn solid white once setup is complete.
   • Unable to visit www.myrouter.info?
     1. Make sure your Router is connected to your modem, and the internet is available.
     2. Confirm that you are connected to your new Router’s WiFi.
   • Receive an error message?
   • Don’t be concerned. Your connection is private, secure and encrypted. It’s safe to proceed to 192.168.1.1.
   • This error only occurs when accessing a router using an HTTPS connection.
   • For more information, visit: https://support.linksys.com/kb/article/65-en/

What do the lights mean

Buttons and Switches

• Factory resetting your Router will restore the default WiFi Name and Password (printed on the bottom of the Router) and remove any connections to Child Nodes.
• Visit Linksys.com/support for factory reset instructions.
• The Linksys Mobile App is not supported by this product.
• 8820-0xxxx Rev.A00
• Factory resetting your Router will restore the default WiFi Name and Password (printed on the bottom of the Router) and remove any connections to Child Nodes.

CUSTOMER SERVICE

• Visit Linksys.com/support for factory reset instructions.

Need help?

• Visit Linksys.com/support

FAQ

Documents / Resources

Linksys 100007 Velop Pinnacle 2.0 Router [pdf] User Guide 100007, 2AYRA-100007, 2AYRA100007, 100007 Velop Pinnacle 2.0 Router, 100007 Velop, Pinnacle 2.0 Router, 2.0 Router, Router

References

• User Manual