Link-LOGO

Link tech LBS-Q218 LED Flashing Portable Wireless Speaker

Link tech-LBS-Q218-LED-Flashing-Portable-Wireless-Speaker-PRODUCT]

Specifications

Wireless V5.3
Support L2CAP/A2DP/AVCTP, can receive AUDIO signal and control the AUDIO device.

Support HSP/HFP(Handsfree profile), with

HANDS-FREE functions.

Working distance 10M
SNR ≥90db
Battery 3.7V about 1500mAh
Normal volume playing time about 3 hours with LED light off
Speaker driver ¢52mm*2
Power 40/5W *2
Frequency response 120Hz-20KHz
Unit size 185.5*82*82.5mm
Unit weight about 587g (not include accessories)
Charging 5V/500mA
charging time about 4h

Product Feature

  1. International advanced wireless chip and circuit design techniques, support all wireless devices.
  2. With FM function, can search radio station broadcast automatically.
  3. With Hi-Fi speaker, to make sure the clear and bright sound.
  4. Supports micro SD card and USB card, play MP3 format audio.
  5. The wireless working distance is 10 meters.
  6. With AUX line in, can directly connect the outside devices, for example, tablet PC/TV/cell phones.
  7. lt will close automatically after 30 mins.
  8. A variety of flashing LED lights with different colors, color lights flash follows the melody.
  9. With mobile holder
  10. Support TWS.

Key And Slot Function

  1. DC 5V slot: Use the standard Micro USB VB charging cable for power charging.
  2. TF slot: It can decode and play MP3 format audio when put TF card into the slot
  3. USB slot: It can decode and play MP3 format audio when put the USB card into the slot
  4. AUX line in slot: Use the Mini 3.5 head input through outside devices.
  5. Power switch: Press long for power on /power off. When play music, (USB card/TF card/Wireless/line in), short press for “play/pause”. In FM mode, press short to search station automatically, press again to stop searching. Under wireless mode with mobile paired, when call coming, press short to answer a call hands-free, press again to hand up, press twice to ring up a call.
  6. When play music, press short for last song, long press to turn down the volume.
  7. When play music, press short for next song, long press to turn up the volume.
  8. LED switch: press short for option of the LED flashing light, press long to close/open the LED light
  9. Short press to switch model

(USB card/TF card/Wireless/line in/FM). TWS: Keep the two speakers under Wireless mode without pairing, press the “M” key for 2-3 seconds either of the speaker until hear a hint and mean-time the button light stop flashing, now it is TWS mode, then can pair the mobile.

NOTE: In the FM mode, put in  micro charging cable or AUX  cable to increase the FM radio  signal. If this speaker crashes during use, you can press and  hold the power button for 8  seconds to reset and shut down.

Link tech-LBS-Q218-LED-Flashing-Portable-Wireless-Speaker-USB/TF card pls use FAT32 format

FAQ

  • Q: How do I reset the speaker if it crashes during use?
    A: Press and hold the power button for 8 seconds to reset and shut down the speaker.

Documents / Resources

Link tech LBS-Q218 LED Flashing Portable Wireless Speaker [pdf] User Manual
LBS-Q218 LED Flashing Portable Wireless Speaker, LBS-Q218, LED Flashing Portable Wireless Speaker, Flashing Portable Wireless Speaker, Portable Wireless Speaker, Wireless Speaker

References

Leave a comment

Your email address will not be published. Required fields are marked *