CH Tree LED Remote Control Christmas Tree
“
Product Specifications
- Category: Tree
- Domination Principle: APP Operation
- Platform: Ble / Android 7.0 or IOS 12.0 or
later - Input Voltage: DC 5V
- Supported Driver IC: YZ-CW-10
- LED Controller: Ble
- Working Temperature: -20~+55°C
- Control Distance: Visible distance 30M
- Certification: CE, RoHS, FCC
- Net Weight: 630g
- Dimension: 1M*1M/2M*2M…1000M*1000M
Product Usage Instructions
Setting up your Bluetooth LED curtain light
- Enable Bluetooth on your phone.
- Power on the LED curtain light.
- Open Surplife App; the app can directly connect to the
device. - It can automatically match the light without other steps,
allowing you to experience the smart light quickly.
Troubleshooting Bluetooth Connection Issues
If connecting the Bluetooth device or adding a new device
fails:
- Power off the LED strip light.
- Turn it on again.
- If the problem persists, restart the phone.
Additional Resources
Scan the instruction QR code to read the electronic manual or
enter the App FAQ to learn more.
Frequently Asked Questions
How to set up your Bluetooth LED curtain light?
Enable your Bluetooth on your phone. Then power on the LED
curtain light. Open Surplife App; the app can directly connect to
the device. It can automatically match the light without other
steps, and you can experience the smart light simply and
quickly.
What should I do if connecting the Bluetooth device or adding a
new device failed?
Please power off the LED strip light, then turn it on again. If
the problem can’t be solved, please restart the phone.
Where can I find more information?
You can scan the instruction QR code to read the electronic
manual or enter the App FAQ to learn more.
“`
CH Tree
Ble&Remote control
.ProductParameter:
C atego r y DominationPrinciple APP OperationPlatform InputVoltage SupportedDriverIC
LEDController Ble / Android7.0orIOS12.0orlater DC5V YZ-CW-10
WorkingTemperature ControlDistance Certification NetWeight Dimension
-20~+55 Visibledistance30M CE,RoHS,FCC 630g 1M*1M/2M*2M…1000M*1000M
-1-
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
-6-
VI.FrequentlyAskedQuestions HowtosetupyourBluetoothLEDcurtainlight?
.EnableyourBluetoothonyourphone. .ThenpowerontheLEDcurtainlight. .Open” Surplife”App,theAppcandirectlyconnecttothedevice.Itcan automaticallymatchthelightwithoutothersteps,andyoucan experiencethesmartlightsimplyandquickly.
HowcanIdoifconnectingtheBluetoothdeviceoraddingnew devicefailed? Pleasepowerofftheledstriplight,thenturnitonagain,ifthe problemcan’tsolve,pleaserestartthephone.
Scanthe” Instruction”QRcodetoreadtheelectronicmanual OrentertheAPPFAQtolearnmore.
Instruction -7-
Documents / Resources
 |
Linhai CH Tree LED Remote Control Christmas Tree [pdf] Instruction Manual DZXCW10, 2BKBW-DZXCW10, 2BKBWDZXCW10, CH Tree LED Remote Control Christmas Tree, CH Tree, LED Remote Control Christmas Tree, Remote Control Christmas Tree, Christmas Tree |