Lightspeed Activate Audio Solutions User Guide

Lightspeed logoActivate Audio Solutions
User GuideLightspeed Activate Audio Solutions

GETTING STARTED WITH ACTIVATE

Lightspeed Activate Audio Solutions fig 1

Get the Activate App
Activate Pods can be controlled by the teacher microphone or the Lightspeed Activate App which can be downloaded from the iOS App Store or Google Play Store:
Lightspeed Activate Audio Solutions qr codehttps://apps.apple.com/us/app/lightspeed-activate/id1217892850
https://play.google.com/store/apps/details?id=com.lightspeed_tek.activate&hl=en_US&gl=US

When using the app, refer to the app tutorial. When using the microphone, see the reverse side.Lightspeed Activate Audio Solutions fig 2

USING YOUR MICROPHONE TO CONTROL ACTIVATE
Lightspeed Activate Audio Solutions fig 3

Action Response Description
CLASS MODE
Whole class instruction Tap the mode button Button lights blue Teacher can address the entire classroom through the classroom speaker
Adjust microphone volume Up/down arrows Volume changes in class speaker Turn the microphone volume up or down
POD MODE
Listen to small groups Tap the mode button Button lights white Teacher can toggle through pods to listen to small groups
Select pods Up/down arrows Selected pod number sounds in earbud Jump from pod to pod listening to different groups
Talk to pods / listen to pods Double Tap mode button (toggle
between listen/talk)
Voice response in earbud Talk to individual groups Double tap again to just listen
Pod to class (student sharing) Press and hold up arrow Voice response in earbud Individual pods broadcast through the class speaker for student sharing
Student sharing pod selection Up/down arrows Voice response in earbud Use the up/down arrows to allow other groups to share out

POD CALL BUTTON

  • Each pod has a call button for students when they need assistance.
  • When the button is pressed, the teacher will hear a tone in their earbud describing which pod is calling.
  • If the pod is not selected, the message will call one more time.Lightspeed Activate Audio Solutions fig 4

RETURN THE COMPONENTS TO THE ACTIVATE STATION FOR NIGHTLY RECHARGING

  • Place all components in their respective charging slots
  • Charging lights will light: red = charging; green = fully charged.
  • The units will fully charge overnight.

Lightspeed Activate Audio Solutions qr code 1For complete operating instructions, go to www.lightspeed-tek.com/ACN-usermanual (or scan the barcode).Lightspeed Activate Audio Solutions bar codeLightspeed logo

Documents / Resources

PDF thumbnailActivate Audio Solutions
User Guide · Activate Audio Solutions, Activate, Audio Solutions

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.