INTRODUCTION
The LIGHTSHARE 24Inch Twins Palm Tree Bonsai Light is a vibrant and eye-catching lighting fixture that seamlessly integrates functionality and creativity, adding a touch of the tropics to your décor. This palm tree-shaped bonsai lamp, which stands 24 inches tall, is adorned with 25 green LED lights and creates a festive and enjoyable ambiance in any environment, whether it be a summer party, themed event, or comfortable indoor space. LIGHTSHARE, a brand renowned for its decorative lighting innovations, is the manufacturer of this product. It is adapter-supported and battery-powered, providing the utmost versatility (adapter included). Its adjustable branches enable personalized design, while its durable iron and metal construction guarantees long-lasting use. The operation is further simplified by a built-in timer that operates for 6 hours on and 18 hours off. It is an ideal choice for bars, bedrooms, terraces, or children’s rooms, and it was introduced at a reasonable price of $39.99. This light provides a vibrant ambiance and exotic appeal year-round, whether you are hosting an outdoor party or enhancing the ambiance of your home.
BATTERY OPERATED WITH ELECTRIC OPTION
INSTALL BATTERIES
- Need a screw driver to install. 4 AA batteries will provide you with a beautiful table light.
- Take the product out of the box.
- Pull off the battery compartment cover with cross screwdriver and insert 4 “AA” alkaline batteries (not included) into the battery compartment.
INSTALL ELECTRIC ADAPTOR
- Remove the rubber cap from the adaptor plug on the base of the tree.
- Connect 6VDa C 3.6W adaptor.
NOTE:
When using the electric adaptor, the tree can not be used outdoors, and the timer function is a restart timer.
USE
- Press the ON / OFF / TIMER switch (I = ON O=OFF II=TIMER) on the base of the tree to operate the lights.
- Press the switch to TIMER if you want the lights to come on each day.
- The lights will glow for 6 hours, then automatically go off, then the next day they will come on and go off at the same time you set them for. It is 6 hours on, 18 hours off.
- Press the switch to ON to turn the lights on manually.
- Available to DIY the branch shape according to your demand.
IMPORTANT SAFETY INSTRUCTIONS
- Please read and follow all instructions and warnings on both the instructions and the product carefully before use.
- Retain these instructions for future reference.
- This product is to be used only as intended its use.
- For indoor/ outdoor use.
- Do not mount or place near gas or electric beaters, fireplaces, candles or other similar sources of heat.
- Do not secure the wiring of this product with staples or nails, or place on sharp hooks, nails or in a manner that can cut or damage the wire or insulation.
- This is an electric product and not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.
- Do not close doors or windows on the product or extension cords, as this may damage the wire and insulation.
BATTERY WARNING
- Do not mix alkaline, standard (carbon-zinc) and rechargeable batteries (Nickel Metal Hydride).
- Do not mix old and new batteries.
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are to be removed from the item before being charged (if removable).
- Rechargeable batteries are only to be charged under adult supervision (if removable).
- Exhausted batteries should be removed immediately and must be recycled or disposed of properly according to state or local government ordinances and regulations.
- The battery supply terminals are not to be short-circuited.
- Only batteries of the same or equivalent type as recommended are to be used.
- Batteries are to be inserted with the correct polarity.
- Do not dispose of batteries in a fire – batteries may leak or explode.
TROUBLESHOOTING
| Issue | Possible Cause | Solution |
|---|---|---|
| Light not turning on | Dead batteries or loose adapter connection | Replace batteries or ensure adapter is securely plugged in |
| Timer not activating | Manual switch interfered with timer | Turn off and on to reset timer cycle |
| Flickering lights | Low battery voltage or unstable contact | Install fresh batteries and check connections |
| Green LEDs appear dim | Dusty bulbs or power drain | Clean LED surface and use a stable power source |
| Tree leans or is unstable | Uneven surface or loose base fitting | Place on flat area and check base assembly |
| Branches won’t hold shape | Cold temperature stiffening material | Warm branches gently and reshape |
| Timer resets unexpectedly | Power source changed | Avoid switching between battery and adapter unnecessarily |
| Adapter gets warm | Continuous use | Unplug when not in use to cool down |
| LED won’t light on adapter | Faulty adapter or power port issue | Test with battery mode or try another adapter |
| Lights won’t shut off | Timer not properly set | Reset timer by turning off and on again |
E HOME INTERNATIONAL INC.
- 19295 E. Walnut Dr. N. Ste B, City of Industry, CA 91748
- Phone: 62- 810-8166, Fax: 626-810-8005
- Customer Service Line: 888-997-9468
- www.ehomeinc.com
- service@ehomeinc.com
FREQUENTLY ASKED QUESTIONS
What type of lighting does the LIGHTSHARE 2ZLTD25B Twins Palm Tree Lamp provide?
The LIGHTSHARE 2ZLTD25B features 25 green LED lights, designed to create a tropical, relaxing atmosphere that enhances any room or event space.
Why isnt my LIGHTSHARE 2ZLTD25B Palm Tree Lamp turning on with batteries?
Check that new, correctly inserted batteries are in place. Ensure the power switch is on and battery contacts are clean and not corroded.
Is the LIGHTSHARE 2ZLTD25B Twins Palm Tree Lamp suitable for use as a night light?
Yes, the soft green glow from the LEDs makes the LIGHTSHARE 2ZLTD25B a great night light for bedrooms, lounges, or home bars.
Can I bend the branches of the LIGHTSHARE 2ZLTD25B Palm Tree Light?
Absolutely. The branches of the LIGHTSHARE 2ZLTD25B are flexible and can be shaped into any design you like, giving you full control over the display.
What power options are available with the LIGHTSHARE 2ZLTD25B model?
The LIGHTSHARE 2ZLTD25B can be powered by batteries (not specified, but typically AA) or by using the included plug-in adapter, offering flexibility for indoor and outdoor use.
Does the LIGHTSHARE 2ZLTD25B Twins Palm Tree Lamp have a built-in timer?
Yes, this model includes a 6-hour on / 18-hour off timer, ideal for automated daily lighting without manual intervention.
What happens to the timer on the LIGHTSHARE 2ZLTD25B if I switch power sources?
Switching between battery and adapter power will reset the built-in timer on the LIGHTSHARE 2ZLTD25B, and youll need to restart the timing cycle.
DOWNLOAD THE PDF LINK: LIGHTSHARE 2ZLTD25B Twins Palm Tree Lamp Instruction Manual-Device.Report