LightpathLED Diesel Mini + Mini Combo

Revision History
Date	Description of changes
January 2024	New Layout

What’s Inside

1. Panel
2. Goggles
3. Charging Plug

Technical Specifications

Power	425W
Input Voltage	AC-110-240V | 50-60Hz
LED Quantity	16 pcs.
Wavelength	630nm | 670nm | 810nm
Time Control	Yes
Beam Angle	30 Degree
Product Size	16* | 10.5* | 4cm
Working Temperature	-20˚C to 45˚C
Lifespan	50,000 Hours
Irradiance	0” | 3” | 6” | 12in.

Device Buttons & Directions

Directions

Charge the Mini for 6 hours before first use. The working time is 2 hours before needing recharging for 6 hours.

1. Charging Port: Insert the DC5V/2A charger into the charging port.
2. Battery indicator Symbol: The battery indicator symbol shows life.
3. Main Switch of the Device: Turn the switch to the “ON” position and turn the switch to “OFF” when no longer using it to save energy. Tip: Don’t need to toggle this switch when charging.
4. Display of function setting: The display button shows the time remaining.
5. Timer: Press this to set the time: 5 minutes, 10 minutes, 15 minutes, 20 minutes, 25 minutes, and 30 minutes.
6. Pulsing: Press this button to set the pulsing: “0Hz and 294hz”. 0hz is non-pulsing.
7. On/Off: Press this to turn on, and press this again to turn off.
8. Mode Setting: Press this button “0001, 0002, 0003” for the working modes. The mode 0001 means Red only, 0002 means NIR only, and 0003 means Red +NIR together.
9. Battery indicator button: Press it once, and the battery indicator will display the current battery level (the red light is on, which means 25% power, and it goes up in sequence; the first green light indicates 50% power, the second green light indicates 75% power, the third green light indicates 100% charged).

General Dosing Instructions

Important Information Regarding Dosing
For skin issues:
We want between 6J to roughly 15J per area. So optimal treatment times with the lights are 5 minutes per area (if the light is 3 inches away).

For deeper issues (muscle, bone, brain, organs, glands, fat, etc.):
we want around 10-60J per area, so optimal treatment times and treatment distances are 10 minutes per area if the light is 3 inches away. 15 minutes per area if 6 inches away.

Red NIR Mode 2						Red / Blue / NIR Mode 3
Distance From Skin						Distance From Skin
Surface		1 in.		3 in.		Surface		1 in.		3 in.
Penetration		Penetration		Penetration		Penetration		Penetration		Penetration
Skin	Deeper	Skin	Deeper	Skin	Deeper	Skin	Deeper	Skin	Deeper	Skin	Deeper
90 sec	10 min	120 sec	18 min	240 sec	N/A	80 sec	10 min	100 sec	18 min	200 sec	N/A

FAQ’s

• Q1. Can I wear clothes when using the panel?
• It’s important to have clean, bare skin wherever the light is being used. Clothes, makeup, lotions, oils, etc. Will block and deflect some or most of the light.
• Q2. How long do I use it per day?
• It is important to always start slow, 2 minutes per area, and then you can add 1 minute until you reach the desired time. It’s best to skip a day in between sessions initially. As long as you are feeling well, you can use it every day.
• Q3. Should I wear goggles?
• Do not look directly into the light. Light therapy has shown positive results for eye health, however, if the light is too bright or bothersome, please wear goggles.
• Q4. Does the panel work while charging?
• Yes

Documents / Resources

LightpathLED Diesel Mini + Mini Combo [pdf] User Manual Diesel Mini Mini Combo, Mini Mini Combo, Mini Combo, Combo

References

• User Manual