Lighting Olympia F5 Multi color RGB series LED neon flex
Contents
hide
Dimension
Features
- Uniform and even light output
- Flat surface with 120 degree beam angle
- 60LEDs or 72LEDs,24V or 48V optional
- Dimmable with Dali, 0/1-10, DMX,PWM
- Full encapsulated with IP68 Level
- High Reliability
- 3 or 5 Years warranty
Applications
- Building facade, outline
- Cove lighting
- Sign and advertising lightin
- Linear lighting
- Additional lighting
- Decorative lighting
Model Encoding
S—— Side entry
D——Direct entry
B——Bottom entry
01—— right
02——left
03——double
SM—— male connetor cable
SF——female connector cable
SMF——male & female connector cable
Blank—–bare wire
Technical Specification
| Model | F15-24V-5050-60-RGB | F15-24V-5050-72-RGB | F15-48V-5050-60-RGB |
| Operating voltage | 24V | 24V | 48V |
| Power consumption | 12W/M | 13W/M | 12W/M |
| Working Mode | PWM CV | PWM CV | PWM CV |
| LED type | SMD5050 | SMD5050 | SMD5050 |
| LED Quantity | 60 pcs/m | 72 pcs/m | 60 pcs/m |
| Available Color | RGB | RGB | RGB |
| Min. cutting Unit | 6 LEDs | 6 LEDs | 15 LEDs |
| Min. cutting length | 10cm | 8.33cm | 25cm |
| Max. length single feed | 10m | 10m | 20m |
| Max. length double feed | 20m | 20m | 40m |
| Bending direction | Horizontally | ||
| Lumen maintenance | 70 000 Hours L70 25°C , 50 000 Hours L70 50°C | ||
| Housing material | Eco PVC or Silicone | ||
| Installation temperature | 0°C to +55°C | ||
| Ambient temperature | -25°C to +55°C | ||
| Ingress protection | IP68 wet location submersible* to 2m | ||
| Warranty | 3 years as standard, 5 years warranty maximum | ||
Lumen Output
Construction
Physical Specification
Mold injection connector
(IP68 Factory Assembly only)
DIY Screw & Snap Connector Kit (IP67 Only)
Other Accessories
Mounting Channel
| Model | Description | Dimension | Drawing |
| ALC15S01 | Use for : F15 & F21 Length option:1m,2m,35mm Material:Aluminum alloy Optional color:AS/AB/PW Type: Standard |
 |
 |
| ALC15S01 | Use for : F15 & F21 Length option:1m,2m,35mm Material:Aluminum alloy Optional color:AS/AB/PW Type: Anti-drop for upside down installation |
 |
 |
| ALC15H01 | Use for : F15 & F21 Length option:1m,2m,35mm Material:Aluminum alloy Optional color:AS/AB/PW Type: Cable hiding |
 |
 |
| ALC15V01 | Use for : F15 & F21 Length option:1m,2m,35mm Material:Aluminum alloy Optional color:AS/AB/PW Type: Vertical installation |
 |
 |
| PC15/21S01-T | Use for : F15 & F21 Length option:1m,2m,35mm Material:Plastic Color: Transparent Type: Standard |
 |
 |
| SSC15FLX | Use for : F15 & F21 Length option:10cm,30cm,50cm,100cm Material: Stainless steel Optional color: Polished Type: Flexible |
 |
 |
| SSC15S01 | Use for : F15 & F21 Length option: 5cm Material: Stainless steel Optional color: Natural color Type: 316 stainless steel |
 |
 |
Packing
Standard: Carton ( Paper reel inside)
Custom: Carton ( White box+plastic plate inside)
Testing
- Please note it is under normal range if there is 20-30% yellowing of PVC housing material when the product is used under direct sunlight or long-term high temperature & wet enviroment in 3 years.
- About the tolerance range of optical parameters (luminance, CCT, Watt, RA) for all product, the volume is plus and minus 10% fluctuation refering to IEC Standard.
- It’s normal for the tolerance range in total length, it occurs from the different production technology, environmental temperature and installation. the volume would be 0.1-5M±7mm, 5.1-10M±15mm, 10.1-20M±30mm.
Loading Chart
Power supply
|
Rated power |
35W | 60W | 75W | 80W | 100W | 120W | 150W | 185W | 240W |
320W |
|
12W |
2m | 4m | 5m | 6m | 7.5m | 8m | 10m | 12.3m | 16m | 20m |
| 13W | 2m | 3.5m | 4.5m | 4.8m | 6m | 7m | 9m | 10m | 13.5m |
19m |
Note: These are the max recommended run lengths based on power supply
For example: It is recommended to use one 80W power supply for a single-feed run of 6m at 12W/m.
Recommendation of extension wire
Maximum extension wire length according to Light power
| Watts of light | 22AWG | 20AWG | 18AWG | 17AWG | 16AWG | 14AWG | 12AWG | 10AWG |
| 0.34mm2 | 0.53mm 2 | 0.82mm2 | 1.04mm2 | 1.38mm2 | 2.07mm2 | 3.29mm2 | 5.62mm2 | |
| 10W | 36m | 60m | 100m | 120m | 140m | 240m | 400m | 600m |
| 20W | 18m | 30m | 50m | 60m | 70m | 120m | 200m | 300m |
| 30W | 12m | 20m | 30m | 38m | 45m | 80m | 130m | 200m |
| 40W | 8m | 15m | 22m | 28m | 35m | 60m | 95m | 140m |
| 50W | 6m | 12m | 18m | 22m | 28m | 48m | 75m | 105m |
| 60W | 5m | 10m | 15m | 18m | 22m | 36m | 60m | 88m |
| 70W | / | 8m | 12m | 14m | 18m | 30m | 50m | 72m |
| 80W | / | 6m | 10m | 11m | 14m | 24m | 40m | 58m |
| 90W | / | 4m | 7m | 8m | 10m | 18m | 30m | 45m |
| 100W | / | / | 5m | 6m | 7m | 12m | 22m | 32m |
| 110W | / | / | 3m | 4m | 5m | 8m | 15m | 22m |
| 120W | / | / | 2m | 2.5m | 3m | 0m | 8m | 12m |
Note:
- The values doesn’t include the 0.6m cable connected to the front connector.
- To ensure the reliability of wire connection and avoid problem of voltage drop, the extension wire length should be smaller than the above recommended values.
Connection Diagram
Connect with CTR-361 PWM controller
Connect with DMX512 controller or DMX Console
For more information
Email: info@olympialed.com
Or visit www.olympialed.com
Documents / Resources
 |
Lighting Olympia F5 Multi color RGB series LED neon flex [pdf] Installation Guide Multi color RGB, LED neon flex |
