LIGHTBAUM Adjustable LED Flashlight
SPECIFICATION
| Feature | Details |
|---|---|
| Brand | ErgoActives |
| Product Name | LightBaum Adjustable LED Flashlight |
| Model Number | A022 |
| Product Type | Clip-on LED Flashlight (Mobility Aid Accessory) |
| Light Source | LED |
| Brightness | ~200 lumens |
| Power Source | Battery powered |
| Mount Type | Universal tube clamp |
| Compatibility | Canes, crutches, walkers, wheelchairs |
| Adjustability | Multi-angle adjustable head |
| Material | Durable plastic |
| Color | Black |
| Installation | Tool-free clip-on mounting |
| Usage | Night walking, path illumination, safety lighting |
| Dimensions | ~4.1 × 3.0 × 1.1 inches |
| Weight | Lightweight (compact design) |
ASSEMBLY STEPS
- 1. Remove the main lighting unit from the cane clip
- Find the arrow mark beside the small window.Turn the battery holder as illustrated, and the stopper willdisappear from the window
- Pull out the battery holder case with light from light hood.
- Separate LED bulb and batteries from the battery holder case as illustrated.
- Push side bar to remove used batteries, and replace with new batteries.
- Place the LED light with new batteries into battery holder and push the unit up to bottom and turn backward until the stopper Is locked into the window securely.
- Slid the LED light unit into clip.
- Push LED light to test lighting function.
- Slid the clip to walking cane and adjust to proper lighting angle.
- If the light does not work property after batteries are changed, please repeat steps 1 to 5 and remove the light unit from battery holder, and use screw driver of pin to push the small steel piece under the most bottom battery, repeat steps 6 to 9 and put the
LED light unit back to light holder, and the light should work property now.
Documents / Resources
 |
LIGHTBAUM Adjustable LED Flashlight [pdf] Instruction Manual Adjustable LED Flashlight, LED Flashlight, Flashlight |