USER GUIDE
LR156
CONIC CLOCK
Design by Lidia Gomez
LR156 Conic Clock
PRODUCT OVERVIEW
- Display
- Speaker
- Volume – Previous track or station / Settings adjustment
- Snooze / Alarm & Sound stop / Preset FM stations
- Volume + /Next track or station / Settings adjustment
- Sleep setting
- Time & Date settings
- Power ON/OFF / Switch modes
- Alarm settings
- Brightness settings
- USB-C port
DISPLAY OVERVIEW
| a. Relative humidity | i. Power & Battery status |
| b. Temperature in °C/°F | j. Night mode ON |
| c. Alarm 1 settings | k. AM/PM (12-h format) |
| d. Alarm 1/2 ON | I. Sleep mode ON |
| e. Time | m. Alarm 2 settings |
| f. Date | n. Radio mode ON |
| g. Bluetooths mode ON | o. Volume level |
| h. Sound OFF (mute) | p. Preset FM stations |
BASIC OPERATIONS
The Conic Clock features a built-in battery, allowing it to function without being continuously plugged in. When unplugged, the LED display automatically activates when the top surface is touched, staying on for 10 seconds before dimming and then entering standby mode.
When plugged into a 5V USB power source, the display remains permanently on.
Power and Mode Selection
- Power ON/OFF: Long press the MODE button for 3 seconds.
- Switch Modes: Press the MODE button to toggle between FM Radio, Bluetooth , and Clock modes.
Volume and Navigation:
- Volume Adjustment: Press the – / + buttons in FM Radio or Bluetooth modes.
- Mute/Unmute: Single press the SNOOZE.
- Track/Station Navigation: Press and hold the – / + buttons to go to the previous or next music track or FM station.
Time & Alarm Settings Adjustment:
- Time, Date, and Temperature: Press and hold the CLOCK button to enter time-setting mode, use the – / + buttons to adjust, and confirm with the SNOOZE or MODE button.
- Alarm Setting: Long press the ALARM button to access alarm settings, adjust with the – / + buttons, and confirm with SNOOZE or MODE button. The alarm will snooze for 6 minutes when SNOOZE is pressed.
FM Radio Functions:
- Switch Stations: Long press – / + to change stations.
- Save Stations: Hold SNOOZE for 2 seconds, toggle with – / +, and confirm with SNOOZE.
- View Saved Stations: Double-tap SNOOZE to navigate saved stations.
- Press the MODE button to enter Bluetooth
Bluetooth ®Functions:
mode. Pair your device by selecting LEXON CONIC CLOCK from the Bluetooth ® list on your mobile device.
SAFETY PRECAUTIONS
- Do not place the device near heat sources such as heaters or radiators.
- Only use the voltage specified as correct for the device.
- Keep away from liquids.
- Do not insert any conductive objects into the speaker or charging port.
- Do not open the device or attempt to disassemble the internal parts or modify them in any way.
PRODUCT SPECIFICATIONS
Material: Aluminum / ABS
Weight: 400 gr / 0.88 lbs
Dimensions: Ø13.5 x 15.9 cm / Ø5.31 x 6.26”
Speaker power: 5W
Bluetooth
version: 5.3
Bluetooth ® range: 10m
Frequency range: 2.402 – 2.480 GHz
Battery capacity: 2000 mAh
Battery voltage: 3.7V
Input voltage: 5V
Battery life:
- Up to 3 months (Alarm & Clock only)
- Up to 8h of battery life (Bluetooth mode only) at 75% volume
- Up to 10h of battery life (FM radio mode only) at 75% volume
Charging time: 5h
Charging system: USB Type-C
Operating temperature: 0°C – 35 °C
International warranty: 1 year
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
IC Caution:
Radio Standards Specification RSS-Gen, issue 5
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.
RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
EU
This device in compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU. All essential radio test suites have been carried out. This restriction will be applied to all Member States of European Union.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
Declaration of Conformity Hereby, LEXON declares that the product type LR156 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.lexon-design.com/assets/certifications-ce-luma.pdf
UK
The device is in compliance with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations SI 2017:1206 (as amended). The device has been evaluated to meet general RF exposure requirements. the device can be used in portable exposure conditions without restriction.
Declaration of Conformity: Hereby, LEXON declares that the product LR156 is in compliance with the following Regulations:
Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electrical Equipment 2012. The Full test of the UK declaration of conformity is available at the following internet address: https://www.lexon-design.com/assets/certifications-ce-luma.pdf
Bluetooth：
Transmitter power：≤0dBm (for EU/UK only)
TX/RX Frequency Range: 2402-2480MHz
FM ：RX Frequency Range：87.5 MHz ~ 108 MHz
Manufacturer: LEXON
125 avenue des Champs-Élysées 75008 Paris France
Documents / Resources
 |
LEXON LR156 Conic Clock [pdf] User Guide LR156, 2ARD3-LR156, 2ARD3LR156, LR156 Conic Clock, LR156, Conic Clock, Clock |