LEVITON ODDMT-MDx Smart Multi Tech Dimming Wallbox Sensor
Specifications
- Electrical:
- Input Voltage/Frequency: 120-277VAC, 50/60Hz
- Input Current:
- 120V – Standby: 0.2W; Max: 0.5W+Load Current
- 277V – Standby: 0.3W; Max: 0.6W+Load Current
- Load Ratings:
- General Purpose @ 120V: 10A
- General Purpose @ 277V: 10A
- LED/Electronic Ballast @ 120V: 8A
- LED/Electronic Ballast @ 277V: 5A
- Standard Ballast @ 120V: 10A
- Standard Ballast @ 277V
- Tungsten @ 120V: 6.67A
- Tungsten@ 277V: –
- Motor @ 120V: 1/4HP (FLA 5.8A)
- Motor @ 277V: 1/3HP (FLA 3.0A)
- IP Rating: IP20
- Network Connections: BLE 4.2, BLE 5.0
- Environmental:
- Operating Temperature: -°C to -°C
- Storage Temperature: -°C to -°C
- Physical Dimensions: 4.13 x 2.12 x 1.86 (104.90mm x 53.95mm x 47.25mm)
- Other:
- Energy Codes: Can be used to comply with ASHRAE 90.1, IECC and
2022 Title 24, Part 6 occupancy/vacancy sensing, dimming, and
manual-ON/auto-OFF requirements - Listings: IECC, UL, and cUL listed; JIS Z 2801:2000
- Certifications: FCC, ICC
- Warranty: Limited five-year warranty
- Energy Codes: Can be used to comply with ASHRAE 90.1, IECC and
Product Usage Instructions
Installation:
- Turn off power to the circuit where the sensor will be installed.
- Follow the provided wiring diagram to connect the sensor.
- Mount the sensor in the desired location using the appropriate hardware.
- Restore power and test the sensor by following the programming instructions.
Programming:
To program the sensor:
- Press and hold the button following the installation instructions.
- Configure settings based on your preferences using the provided table.
Usage:
The sensor detects motion in minor and major zones to control lighting accordingly.
Description
The Leviton Smart Dimming Wallbox Sensor (ODDMT-MDx) is designed for use with 0-10V ballasts and uses Passive Infrared (PIR) detection and Microphonics technology to monitor a room for occupancy. The PIR sensor uses a specialized segmented and tamper resistant lens that divides the field-of-view into sensor zones. When a person passes in or out of a sensor zone the sensor detects motion and switches the lights ON. The lights will remain ON as long as an occupant moves through the sensor zones and will turn off when the space becomes vacant and after the timeout expires. The ODDMT also utilizes Microphonic technology that “listens” for human activity in the space and will keep the lights ON when motion is detected. Microphonics does not require direct line of sight and can pick up human activity behind obstructions that PIR-only devices are unable to detect. The ODDMT features a vacancy mode for manual-ON/auto-OFF operation, ideal for installations where manual-ON switching is required for energy code applications.
Lighting levels can be adjusted using the dimming bar next to the switch.
A “minor motion” zone detects small body movements. This detection allows the lights to remain ON when individuals in the space are more stationary. The “major motion” zone exhibits a lesser degree of sensitivity requiring larger movements.
Configuration of the ODDMT is made using the Leviton Smart Sensor App from a smartphone or other Bluetooth®-enabled Android or iOS device. Simple configuration can also be applied using pushbutton setup for several popular pre-configured options. The ODDMT integrates a photocell for daylighting hold-OFF which can be programmed using the Leviton Smart Sensor App.
Applications
- Office
- Small Lobbies
- Meeting Rooms
- Bathrooms/Restrooms
- Conference Rooms
Features
- Can be used to comply with ASHRAE 90.1, IECC and 2022 Title 24, Part 6 occupancy/vacancy sensing, dimming, and manual-ON/auto-OFF requirements
- Fits in a standard wallbox and gangable with other units
- Use the Leviton Push to Pair (P2P) process to create a multi-way system for up to 5 devices
- Controls LED lighting loads up to 8A
- One relay module for single-level switching
- 180° field-of-view provides approximately 1,100 square feet of coverage
- Latest PIR technology accurately detects minor motion up to 400sq ft and major motion up to 1,100 sq ft
- Maximum sensing distance in front of the sensor is 30-40 feet and 15-20 feet on either side
- Microphonics technology able to detect minor human activity and does not require direct line-of-sight
- Integrated photocell for daylighting hold-OFF
- Tamper resistant PIR lens
- Antimicrobial treated faceplate and wallplate available
- Advanced configuration can be performed using the Leviton Smart Sensor App on any Bluetooth-enabled Android or iOS device:
- Set operating mode to Occupancy (Auto-ON/Auto-OFF) or Vacancy (manual-ON/auto-OFF)
- Adjust sensitivity and timeouts
- Set up partial-ON and partial-OFF levels and partial-OFF timeouts
- Enable the integrated photocell for daylighting hold-OFF and select target daylighting hold-OFF levels
- Create custom templates for easy multi-room replication of sensor settings
- Activate the nightlight and select nightlight color
- Set a security code to lock configuration settings
- Out-of-the-box configuration default mode:
- Auto-ON/Auto-OFF with 20-minute time out
- Sensitivity set to 75%
- Nightlight and daylighting disabled
- Convenient pushbutton hold configuration for installers without a smart device*:
Pushbutton Hold Configuration Button (#)
Operating Mode PIR Sensitivity (%)
Microphonics Sensitivity (%) Time Out (mins) 1 Auto-ON/ Auto-OFF
75
75 20 2 10 3 OFF 20
4 50 5 100 75 6 100 7 Manual-ON/ Auto-OFF
75
75 8 10 9 OFF 20
10 50 11 100 75 12 100
Requires removal of front face cover
Wiring Diagrams—ODDMT-MDW
Field of View Diagram
Dimensions Diagram
Specifications
| Electrical | |
| Input Voltage/Frequency | 120-277VAC, 50/60Hz |
| Input Current | |
| 120V | Standby: 0.2W; Max: 0.5W+Load Current |
| 277V | Standby: 0.3W; Max: 0.6W+Load Current |
| Load Ratings | |
| General Purpose @ 120V | 10A |
| General Purpose @ 277V | 10A |
| LED/Electronic Ballast @ 120V | 8A |
| LED/Electronic Ballast @ 277V | 5A |
| Standard Ballast @ 120V | 10A |
| Standard Ballast @ 277V | |
| Tungsten @ 120V | 6.67A |
| Tungsten@ 277V | |
| Motor @ 120V | 1/4HP (FLA 5.8A) |
| Motor @ 277V | 1/3HP (FLA 3.0A) |
| IP Rating | IP20 |
| Network Connections | BLE 4.2, BLE 5.0 |
| Environmental | |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -40 to 185°F (-40 to 85°C) |
| Physical | |
| Dimensions | 4.13” x 2.12” x 1.86” (104.90mm x 53.95mm x 47.25mm) |
| Other | |
| Energy Codes | Can be used to comply with ASHRAE 90.1, IECC and 2022 Title 24, Part 6 occupancy/vacancy sensing, dimming, and manual-ON/auto-OFF requirements |
| Listings | IECC, UL and cUL listed; JIS Z 2801:2000 |
| Certifications | FCC, ICC |
| Warranty | Limited five-year warranty |
Product Data
ODDMT-MDx
Ordering Information
| Smart Wallbox Sensors | |
| Cat. No. | Description |
| ODDMT-MDW | Smart Multi-Tech 0-10V Dimming Wallbox Sensor, App configurable; Auto-ON/Auto-OFF or manual-ON/auto-OFF, neutral wire required, 120/208/220/230/240/277VAC, 50/60Hz; White |
| ODDMT-MDI | Smart Multi-Tech 0-10V Dimming Wallbox Sensor, App configurable; Auto-ON/Auto-OFF or manual-ON/auto-OFF, neutral wire required, 120/208/220/230/240/277VAC, 50/60Hz; Ivory |
| ODDKT-00E | Smart Dimming Wallbox Sensor Color Change Kit, Black |
| ODDKT-00R | Smart Dimming Wallbox Sensor Color Change Kit, Red |
| ODDKT-00G | Smart Dimming Wallbox Sensor Color Change Kit, Gray |
| ODDKT-00I | Smart Dimming Wallbox Sensor Color Change Kit, Ivory |
| ODDKT-00T | Smart Dimming Wallbox Sensor Color Change Kit, Light Almond |
| ODDKT-00W | Smart Dimming Wallbox Sensor Color Change Kit, White |
MORE INFORMATION
Leviton Manufacturing Co., Inc. Lighting & Controls
10385 SW Avery St Tualatin, OR 97062 tel 800-736-6682 tech line (6:00AM-4:00PM PT Mon-Fri) 800-959-6004
Leviton Manufacturing Co., Inc. Global Headquarters
201 North Service Road, Melville, NY 11747-3138 tel 800-323-8920 tech line (8:00AM-10:00PM ET Mon-Fri, 9:00AM-7:00PM ET Sat, 9:00AM-5:00PM ET Sun) 800-824-3005
Visit our Website at: www.leviton.com/smartsensors
©2024 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
FAQ
- How do I reset the sensor?
- To reset the sensor, press and hold the reset button for 10 seconds.
- What is the warranty period for this product?
- This product comes with a limited five-year warranty.
Documents / Resources
 |
LEVITON ODDMT-MDx Smart Multi Tech Dimming Wallbox Sensor [pdf] Owner's Manual ODDMT-MDx Smart Multi Tech Dimming Wallbox Sensor, ODDMT-MDx, Smart Multi Tech Dimming Wallbox Sensor, Tech Dimming Wallbox Sensor, Dimming Wallbox Sensor, Wallbox Sensor, Sensor |