LETSCOM F-531 Ring Fill Light User Manual

LETSCOM F-531 Ring Fill Light

Package Contents


① Ring Fill Light × 1
② Tripod Stand × 1
③ Ball Head A × 1
④ Ball Head B × 1
⑤ Flexible Phone Holder × 1
⑥ Phone Holder × 1
⑦ Selfie Remote Control × 1
⑧ User Manual × 1

At a Glance

Ring Fill Light

Tripod Stand

Ball Head A

Ball Head B

Flexible Phone Holder

Phone Holder

Installation Guide

Installing Ring Fill Light
  1. Screw ball head A into the screw hole on the tripod stand.
  2. While holding the ring fill light in one hand, screw ball head A into the bottom of the light.
  3. Pull out the three legs of the tripod stand and place it on your desk.
  4. Loosen the fastener of ball head A, adjust the ring fill light to your desired angle, and then tighten the fastener.

Note: Please extend the three legs of the tripod stand as much as possible to ensure its stability.

Installing Phone Holder
  1. Screw ball head B into the screw hole on the ring fill light and then screw the phone holder into ball head B.
  2. Loosen the fastener of ball head B, adjust the phone holder to your desired angle, and then tighten the fastener.

You can also install your phone on the stand using the flexible phone holder.

Screw the flexible phone holder into the screw hole on the ring fill light.


Using Your Ring Fill Light

Power on

After mounting the ring fill light on the tripod stand, connect the USB connector of the ring fill light to a USB wall charger or computer USB port that is powered on (5V / 2A).

Adjust Brightness & Change Lighting Mode

Press the power button to turn the light on, press the up / down button to increase / decrease the brightness (10 levels). Press the mode button to change lighting mode (white / natural / warm).

Use Selfie Remote Control

Pair

  1. Turn on the Bluetooth of your phone.
  2. Slide the power switch to ON. The remote control will enter pairing mode (the LED indicator will flash blue).
  3. Choose “AB Shutter3” from the list of found Bluetooth devices on your phone to pair.
Take a Photo / Start Recording

When our selfie remote control is successfully paired with your phone,
open the camera app, press Button A or Button B on the remote control depending on your phone type to take a photo / start recording.

Note:
When the selfie remote control is connected to your phone, you may encounter text input problem, please go to your smartphone “Settings” → “System” → “Keyboard & Input Method” and select system default input method.

Compatible Devices
Compatible Devices Built-in Camera App Camera 360 App
Compatible with iOS 6.0 OS or newer (e.g., iPhone 11/11 Pro/11 Pro Max,
iPhone XS/XS Max, iPhone XR, iPhone X, iPhone8/8P, iPhone7/7P, iPhone6/6S/6P/6SP, iPhoneSE, iPhone 5S/5C/5, iPhone 4S/4, iPad 3/2, iPad mini, iPad with Retina Display, iPod touch 4th).
Compatible with Android 4.2.2 OS or newer (e.g., Samsung Galaxy S2/S3/S4/S10/S20 5G/S20 Ultra 5G, Samsung Galaxy Note 1/2/3/8/9/10, Moto X, Nexus 4/5/7+, Xiaomi 1S/2S/3+).
Sony Xperia S HTC New one and X+ Not Applicable

Specifications

Specifications (Ring Fill Light)

Model F-531
Material ABS+PC
 Ring Diameter  10.2 inches / 0.26 meters (outer diameter)
8.1 inches / 0.21 meters (inner diameter)
Lighting Mode White / Natural / Warm
Color Temperature 3000K to 6000K
Adjustable Brightness 10 levels
Lumens 1100 to 2200 lm
Number of LED Bulbs 120
Power Supply Mode USB
Input Power 5V / 2A
Output Power 10W
Power Cord Length 10 feet / 3 meters
Model AB Shutter3
Bluetooth Version V4.0
Bluetooth Connection Distance 33 feet / 10 meters
Battery Type CR2032
Battery Life Approximately 6 months (average use of 10 times a day)

SAFETY AND WARRANTY

Safety Instructions
  • This product must be used with an input power of 5V / 2A, and low power input will reduce the brightness of the ring fill light.
  • Do NOT try to dismantle or modify the product.
  • Keep this product away from water and any flammable gases or liquids.
  • Do NOT repair the product in dangerous places such as gas, steam, etc. It is easy to conduct electricity in a humid environment.
  • Do not let any liquid flow into the product, as this may seriously damage the product.
  • Do NOT use the product in the environment where the room temperature is lower than 0°C (32°F) or higher than 45°C (113°F).
  • Clean the product only with a dry, soft cotton cloth or equivalent. Do not scrub it with gasoline, volatile oil, etc.
  • If an abnormal situation occurs, stop using the product and cut off the power immediately.
  • Keep the product clean. When the product is not in use, store it properly.
  • Keep the product out of the reach of children.

Warranty

We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of defect. We are happy to offer a one-year hassle-free warranty to all our products as we continue to make amazing products. Please contact us if you have any questions about our devices.

Documents / Resources

PDF thumbnailF-531 Ring Fill Light
User Manual · F-531 Ring Fill Light, F-531, Ring Fill Light

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.