Lenso Custom Wheel
Product Specifications
- Make: Toyota
- Model: Corolla
- Year: 2020
- Original Wheel Size (Front): 16″ x 7″
- Original Wheel Size (Rear): 16″ x 7″
- Original Tyre Size (Front): 205/55R16
- Original Tyre Size (Rear): 205/55R16
- Bolt Pattern (PCD) (Front): 5×100 mm
- Bolt Pattern (PCD) (Rear): 5×100 mm
Product Usage Instructions
Front Wheel Installation
- Ensure the vehicle is securely lifted and supported.
- Remove the lug nuts from the existing wheel and carefully take off the wheel.
- Align the new wheel with the hub, ensuring the bolt pattern matches.
- Secure the wheel in place using the lug nuts and tighten them in a crisscross pattern.
- Lower the vehicle and tighten the lug nuts to the recommended torque specification.
Rear Wheel Installation
- Follow steps 1-5 from the Front Wheel Installation section.
- For vehicles with rear drum brakes, ensure proper adjustment after wheel installation.
Assembly and Installation Instructions
Preparation
- Gather Tools and Equipment: Ensure you have the necessary tools, including a torque wrench, wheel lug nut socket, jack, and jack stands.
- Safety First: Wear appropriate personal protective equipment (PPE), such as gloves and safety glasses.
Wheel and Tire Mounting
- Mounting the Tire: If the tire is not already mounted on the wheel, use a tire mounting machine to mount the tire onto the wheel. Ensure the tire is seated correctly on the bead.
- Balancing: After mounting, balance the wheel and tire assembly to ensure smooth rotation and prevent vibrations.
Installation on Vehicle
- Position the Wheel: Align the wheel with the vehicle’s wheel hub, ensuring the bolt holes are aligned with the studs.
- Hand-Tighten Lug Nuts: Place the lug nuts onto the wheel studs and hand-tighten them to secure the wheel temporarily.
- Lower the Vehicle: Carefully lower the vehicle using the jack, bringing the wheel into contact with the ground.
Torqueing Lug Nuts
- Proper Torque: Using a calibrated torque wrench, tighten the lug nuts in a crisscross pattern to the manufacturer’s specified torque setting. This ensures even pressure distribution across the wheel.
- Recheck Torque: After driving the vehicle for a short distance, recheck and retighten the lug nuts to the specified torque setting.
Final Inspection
- Check for Issues: Inspect the wheel and tire assembly for any signs of damage or improper installation.
- Test Drive: Take the vehicle for a short test drive to ensure proper handling and to detect any unusual noises or vibrations.
Frequently Asked Questions
What should I do if the bolt pattern doesn't match?
If the bolt pattern of the new wheel does not match the hub, do not attempt to install it. Contact customer support for assistance in finding a compatible wheel.
How tight should the lug nuts be?
Lug nuts should be tightened according to the manufacturer's recommended torque specifications. Over-tightening can lead to damage.
Documents / Resources
 |
Lenso Custom Wheel [pdf] Owner's Manual DAGwqn4wD08, BAFvyBq1aAo, Custom Wheel, Custom, Wheel |