40SHC Portable Fog Machine
“
Specifications:
- Model: 40SHC
- Type: COB 40W
- Charging Port: TYPE-C / DV
- Color Rendering Index: 96
- Batteries: 4 x 18650 14.8V
- Charging Voltage: 12V 2A
- Duration of Use: Approximately 1 hour (at
maximum brightness) - Brightness Adjustment: 0%-100%
- Number of Beads: Total 192 pcs
- Bead Voltage: 36 ~ 68V
- Bead Current: 1100mA
Product Usage Instructions:
Description:
The 40SHC is a COB 40W light with dual-color temperature
(2700-7000K adjustable), color rendering index of 96, and burst
flash. It features a vintage flash styling along with constant
light, suitable for use with mobile phones and cameras.
Creative Scene Lighting Effects:
Create personalized atmospheres to enhance the quality of your
images.
With Silicone Softbox:
The soft light amplitude is suitable, providing soft and
non-harsh lighting.
Brightness Adjustment:
The brightness is adjustable from 0% to 100% by turning the
adjustment knob.
Operating Instructions:
Refer to the product structure diagram for reference. To turn
on/off the light, long-press the knob. Adjust the brightness by
turning the knob clockwise for increasing brightness and
counterclockwise for dimming.
FAQ:
Q: How do I clean the product?
A: Please use a soft sponge, soft cloth, or dry cloth to clean
the product regularly. Avoid using bleach or wire balls to wipe the
product. Ensure that the product is wiped clean and kept dry.
Q: What should I do if accessories show signs of aging or
damage?
A: Accessories like the mobile phone clip, camera frame, hand
screws, etc., are consumables and not covered under the 2-year
warranty. If you notice aging or damage, contact the dealer to
purchase new replacement parts for continued convenience.
“`
INSTRUCTIONS NOTES
This manual provides information on the proper use and storage of the product and accessories, and assists the user in dealing with questions about their use and in understanding the safety precautions to be taken.
40SHC PLEASEREADCAREFULLY When handing the product over to another person, be sure to include this manual, heed all warnings and follow all instructions in the manual.
2 YEAR WARRANTY DESCRIPTION
The warranty, which applies to all purchasers from our authorised dealers, covers any defects caused by production, as well as failures in the course of normal use, excluding physical damage, natural disasters (fire, flood, earthquake lightning, etc.) and chemical corrosion, unauthorised repairs, replacement of components during handling, collisions at the site of the installation and other failures due to human or force majeure reasons. and damage, or the manual Any malfunction caused by acts expressly prohibited by the instruction manual
USER ‘S MANUAL
ACCESSORY DESCRIPTION
Mobile phone clip, camera frame, hand screws and other accessories are consumables (not in the 2-year warranty), after use, please confirm whether there is aging, damage and other conditions of this phenomenon is normal wear and tear, in order to use the convenience of please contact the dealer in time to buy new parts replacement!
MAINTENANCE METHODS
Please use a soft sponge, soft cloth, dry cloth to clean the product regularly, do not use bleach, wire ball wipe, wipe clean and keep the product dry.
MODEL: 40SHC
For more information on LENSGO product features, Please visit W W W.lensgo.net
1
INSTRUCTIONS LIST OF ACCESSORIES
You will receive the following accessories (subject to the options available at the time of your order)
2
3
4
1
5
6
1 Handheld light 4 Battery charger
2 Silicone softbox
3 Mobile phone clip (horizontal / vertical )
5 Camera bracket (mobile phone holder can be mounted)
6 Hand screw X2
2
40SHC
MODEL:
Please read these instructions carefully before using this product
WHEN USING, DO NOT SHINE THE LIGHT TO THE EYES TO PREVENT
EYE BLURRING
3
INSTRUCTIONS
40SHC is a COB 40W, dual colour temperature 2700-7000K adjustable, colour rendering index 96, burst flash, along the vintage flash styling of the constant light, mobile phone / camera can be used!
CREATIVE SCENE LIGHTING EFFECTS Creating different personalised atmospheres to enhance the quality of the image shot
WITH SILICONE SOFTBOX The soft light amplitude is suitable, the light is soft and not harsh
0%-100% BRIGHTNESS ADJUSTABLE Turning the adjustment knob, the brightness change range is 0-100%.
OPERATING INSTRUCTIONS
Product structure diagram. 1
2 3
6 5 4
COB 40W
SPECIFICATION
MODEL
40SHC
TYPE
COB 40W
Charging port:
TYPE – C / DV
Jadeite thumb ring 96
Batteries
4 x 18650 14.8V
Charging Voltage Duration of use Adjustment range
12V 2A
Approx. 1 hour
(when used at maximum brightness)
Brightness adjustment 0%-100%
Number of beads Total 192 pcs
Bead Voltage
36 ~ 68V
Bead Current
1100mA
4
7
1 TYPE-C charging port
Charging voltage 5V 2A
2 DC charging port
3 Indicator
Charging voltage 5V 2A
light
Approximately 2 hours to full
4 Charging Indicator
5 On / Off
7 1/4 screw hole
Flashing lights in order of % when charging
6 knob
Long press to switch on/off
Expandable mounting bracket with 1/4 thread connector
Turn the knob clockwise to adjust the brightness of the light, this time the light will be in accordance with the % ratio of light, turn counterclockwise when the brightness is dimmed
5
INSTRUCTIONS
4
3
2
1
10-100% brightness adjustable
Turn clockwise 4 to adjust the brightness of the light, this time the indicator light will be in accordance with the % ratio of light, counterclockwise turn dimming brightness
28 lighting effects
Double click 1 to enter FX mode
3Push to switch between warm
and cold light
Click 1 for instant switching
4Detecting power
Off state, click 1 to detect the power, display the current power % position, if all do not light up, please charging
After switching on the device, the 3 indicator lights are on blue, if the red light is flashing, please charge the device.
FX MODE 8 different effects, press to switch, double click to exit after setting up
LIGHTNING MODE
TV MODE
BAD BULB MODE
SOS
SOS MODE
BURST MODE
CANDLELIGHT MODE
ON
LOW BATTERY
When charging 2 Flashing in order of %, full blue light always on
PULSE FLASH MODE
HIGH AND LOW BEAM BULBS
Charging
Fully charged
6
7
INSTRUCTIONS BRACKET DESCRIPTION
1
2
3
4
Camera Usage
5
6
1 1/4 screw hole, fits 5 , locks bracket to light.
2 Expandable to mount any tripod device with 1/4 screws
3 With 6 hand screws, the camera can be mounted to the bracket with a locking mechanism.
4 Expandable to mount any tripod device with 1/4 screws
! WARNING
Keep this product out of the reach of children in a safe place. Please use the original parts correctly. Before each use, please be sure to check whether the installation is stable, to prevent accidents during use. Store in a cool, dry place, prohibit exposure to the sun, waterproof
! WARNING
1: Align the bracket to the bottom of the light first and tighten the screw by hand 2: The camera is set up on the bracket and screwed in by hand. 3: Can be expanded to install any equipment with 1/4 interface according to the use of demand
Before use, please carefully check whether the installation is stable or not.
8
9
INSTRUCTIONS BRACKET DESCRIPTION
Mobile phone usage
Adjustable horizontal/vertical racket
! WARNING
Do not touch the COB lamp beads with your hands to prevent burning hands
This product is a precision instrument, please avoid dropping it when using it.
Contact authorised service personnel when repairs are required
It is recommended to use the original LENSGO cables. Any damage to this product caused by the use of non-Longsong original accessories is not covered by our warranty. Any damage to this product is not covered by our warranty.
Please clean the product with a soft, dry cloth. This specification is based on our rigorous testing. Design and specifications are subject to change without notice
Please keep it in a safe place, read this instruction manual carefully, and observe all precautions Before use, please check whether the installation is stable, to prevent accidents during use. Please switch off the product after charging, in order to protect the safety and life of the battery, try not to use it during charging. use the product during charging.
Do not cover the ventilation holes when using the silicone softbox.
! WARNING
1: Align the bracket to the bottom of the light first and tighten the screw by hand 2: The camera is set up on the bracket and screwed in by hand. 3: Can be expanded to install any equipment with 1/4 interface according to the use of demand
Before use, please carefully check whether the installation is stable or not.
CERTIFICATE OF CONFORMITY
PRODUCT NAME: MODEL INSPECTION DATE INSPECTOR:
QUALIFIED
10
11
USER’S MANUAL
MODEL: 40SHC
JIAZHIYING PHOTOGRAPHY EQUIPMENT CO., LTD.
Address: Room 201, Building C, No. 8 Fengqi Road, Fucheng’ao Community, Pinghu Subdistrict, Longgang District, Shenzhen, China Webhttps://www.lensgo.net /
12
Documents / Resources
 |
LENSGO 40SHC Portable Fog Machine [pdf] User Manual 40SHC, 348c, SMOKE GO, 40SHC Portable Fog Machine, Portable Fog Machine, Fog Machine |