40SHB Portable Fog Machine
“
Specifications
- Model: 40SHB
- Type: COB 40W
- Colour Temperature: 2700K-7000K
- Colour Rendering Index: 96
- Batteries: 4 x 18650 14.8V
- Charging Voltage: 12V 2A
- Duration of Use: Approximately 1 hour (when
used at maximum brightness) - Brightness Adjustment: 0%-100%
- Number of Beads: Total 192 pcs
- Bead Voltage: 36 ~ 68V
- Bead Current: 1100mA
Product Usage Instructions
Operating Instructions
Product Structure Diagram:
- Knob: Turn the knob clockwise to adjust the
brightness of the light. Double-click the knob switch to enter the
colour temperature mode. - Flashing Button / Indicator Light: Press and
hold to enter flash mode, release to pause the flash. - On/Off: Push the switch to ON position to
automatically detect the power. The indicator light will run a
circle and stop in the power position. If low power, please charge
after use. - DC Charging Port: Charging voltage is 12V
2A. - 1/4 Screw Hole: Expandable mounting bracket
with 1/4 thread connector.
List of Accessories
- Handheld Light
- Silicone Softbox
- Mobile Phone Clip (horizontal / vertical)
- Camera Bracket (mobile phone holder can be
mounted) - Hand Screw x2
Frequently Asked Questions (FAQ)
Q: How do I adjust the brightness of the light?
A: Turn the knob clockwise to adjust the
brightness from 0% to 100%.
Q: What should I do if the indicator light flashes red?
A: If the indicator light flashes red, it
indicates low power. Please charge the product before further
use.
Q: Can I mount a mobile phone on the camera bracket?
A: Yes, the camera bracket can hold a mobile
phone for use.
“`
MODEL: 40SHB
DC 12V 2A
USER’S MANUAL
MODEL: 40SHB
NOTES This manual provides information on the proper use and storage of the product and accessories, and assists the user in dealing with questions about their use and in understanding the safety precautions to be taken.
PLEASE READ CAREFULLY When handing the product over to another person, be sure to include this manual, heed all warnings and follow all instructions in the manual.
2 YEAR WARRANTY DESCRIPTION The warranty, which applies to all purchasers from our authorised dealers, covers any defects caused by production, as well as failures in the course of normal use, excluding physical damage, natural disasters (fire, flood, earthquake lightning, etc.) and chemical corrosion, unauthorised repairs, replacement of components during handling, collisions at the site of the installation and other failures due to human or force majeure reasons. and damage, or the manual Any malfunction caused by acts expressly prohibited by the instruction manual
ACCESSORY DESCRIPTION Mobile phone clip, camera frame, hand screws and other accessories are consumables (not in the 2-year warranty), after use, please confirm whether there is aging, damage and other conditions of this phenomenon is normal wear and tear, in order to use the convenience of please contact the dealer in time to buy new parts replacement!
MAINTENANCE METHODS Please use a soft sponge, soft cloth, dry cloth to clean the product regularly, do not use bleach, wire ball wipe, wipe clean and keep the product dry.
For more information on LENSGO product features, Please visit W W W.lensgo.net
1
INSTRUCTIONS
40SHB is a COB 40W, dual colour temperature 2700-7000K adjustable, colour rendering index 96, burst flash, along the vintage flash styling of the constant light, mobile phone / camera can be used!
2700K – 7000K DUAL COLOUR TEMPERATURE Knob-adjustable infinitely dimmable, high display index to restore true colours
WITH SILICONE SOFTBOX The soft light amplitude is suitable, the light is soft and not harsh
0%-100% BRIGHTNESS ADJUSTABLE Turning the adjustment knob, the brightness change range is 0-100%.
SPECIFICATION
MODEL
40SHB
TYPE
COB 40W
Colour temperature: 2700K-7000K
Jadeite thumb ring 96
Batteries
4 x 18650 14.8V
Charging Voltage Duration of use Adjustment range
12V 2A
Approx. 1 hour
(when used at maximum brightness)
Brightness adjustment 0%-100%
Number of beads Total 192 pcs
Bead Voltage
36 ~ 68V
Bead Current
1100mA
4
OPERATING INSTRUCTIONS Product structure diagram.
1 2
3
DC 12V 2A
4
1 knob
Turn the knob clockwise to adjust the brightness of the light.
Double-click the knob switch to enter the
colour temperature mode
5
2 Flashing Button / Indicator Light
Press and hold to enter flash mode, release to pause the flash.
3 On/Off
Push the switch to ON position, automatically detect the power, the indicator light will run a circle and stop in the power position, if low p ower, please charge after use
4 DC charging port
Charging voltage 12V 2A
5 1/4 screw hole
Expandable mounting bracket with 1/4 thread connector
5
LIST OF ACCESSORIES
You will receive the following accessories (subject to the options available at the time of your order)
40SHB
MODEL:
2
Please read these instructions
carefully before using this product
3
4
5 6
1
1 Handheld light 4 Battery charger
2 Silicone softbox
3 Mobile phone clip (horizontal / vertical )
5 Camera bracket (mobile phone holder can be mounted)
6 Hand screw X2
2
WHEN USING, DO NOT SHINE THE LIGHT TO THE EYES TO PREVENT
EYE BLURRING
3
tro
MODEL: 40SHB
ON / OFF
1 Push the switch to `ON’.
Automatically detect the power after switching on, the 2 indicator light will be red running around after the red light stops in the power position, low power when the red light flashes, please charge first after use
2 Long press to flash mode
Release to stop flashing
3 2700K-7000K colour
temperature adjustment
Lights up after power on
3
Double-click the knob switch to
enter the colour temperature mode, clockwise direction to adjust the cold
2
light, counterclockwise direction to
adjust the ambiguous light, adjust the completion of the double-click to return to the
1
Push to switch between warm and cold light
0-100% brightness adjustable
Turn the knob clockwise to adjust the brightness of the light, this time the light will be in accordance with the % ratio of light, turn counterclockwise when the brightness is dimmed
When charging, press % to flash the light sequentially, full of
red light always on
60%
60%
40%
40%
80%
80%
20%
20%
100%
Charging time
6
FULLY CHARGED
100%
BRACKET DESCRIPTION
1
2
3
4
5
6
1 1/4 screw hole, fits 5 , locks bracket to light.
2 Expandable to mount any tripod device with 1/4 screws
3 With 6 hand screws, the camera can be mounted to the bracket with a locking mechanism.
4 Expandable to mount any tripod device with 1/4 screws
! WARNING
Keep this product out of the reach of children in a safe place. Please use the original parts correctly. Before each use, please be sure to check whether the installation is stable, to prevent accidents during use. Store in a cool, dry place, prohibit exposure to the sun, waterproof
7
INSTRUCTIONS
Camera Usage
Mobile phone usage
Adjustable horizontal/vertical racket
! WARNING
1: Align the bracket to the bottom of the light first and tighten the screw by hand 2: The camera is set up on the bracket and screwed in by hand. 3: Can be expanded to install any equipment with 1/4 interface according to the use of demand
Before use, please carefully check whether the installation is stable or not.
! WARNING
1: Align the bracket to the bottom of the light first and tighten the screw by hand 2: The camera is set up on the bracket and screwed in by hand. 3: Can be expanded to install any equipment with 1/4 interface according to the use of demand
Before use, please carefully check whether the installation is stable or not.
8
9
INSTRUCTION
! WARNING
Do not touch the COB lamp beads with your hands to prevent burning hands
This product is a precision instrument, please avoid dropping it when using it.
Contact authorised service personnel when repairs are required
It is recommended to use the original LENSGO cables. Any damage to this product caused by the use of non-Longsong original accessories is not covered by our warranty. Any damage to this product is not covered by our warranty.
Please clean the product with a soft, dry cloth. This specification is based on our rigorous testing. Design and specifications are subject to change without notice
Please keep it in a safe place, read this instruction manual carefully, and observe all precautions
Before use, please check whether the installation is stable, to prevent accidents during use. Please switch off the product after charging, in order to protect the safety and life of the battery, try not to use it during charging. use the product during charging.
Do not cover the ventilation holes when using the silicone softbox.
CERTIFICATE OF CONFORMITY
PRODUCT NAME: MODEL INSPECTION DATE INSPECTOR:
QUALIFIED
10
11
USER’S MANUAL
MODEL: 40SHB
JIAZHIYING PHOTOGRAPHY EQUIPMENT CO., LTD.
Address: Room 201, Building C, No. 8 Fengqi Road, Fucheng’ao Community, Pinghu Subdistrict, Longgang District, Shenzhen, China Webhttps://www.lensgo.net /
Documents / Resources
![]() |
LENSGO 40SHB Portable Fog Machine [pdf] User Manual 40SHB Portable Fog Machine, 40SHB, Portable Fog Machine, Fog Machine |